What bios did you flash?
What bios did you flash?
Q9550 @ 4.25 GHz, 500FSB, 2x2 GB OCZ Platinum 1066MHZ DDR2 @ 1001 MHz CL5-5-5-15,DFI LanParty DK P45-T2RS Plus, Powercolor HD 5870 1024MB , 2x WD Black Caviar 640GB Raid 0, 1x Samsung 250gb, 1x Maxtor 500GB IDE, Antec 900, Corsair TX-750.
Help Save Lives Join World Community Grid!
The last, I remember very well, but growth that the date was 20/05/2010.
Another thing that happens is that with the Q9650 installed, the motherboard is silly, just shows the code C1-01-C1 -01 and so repeatedly, restart and start again with these codes ...
mm strange contact dfi support i guess...
Q9550 @ 4.25 GHz, 500FSB, 2x2 GB OCZ Platinum 1066MHZ DDR2 @ 1001 MHz CL5-5-5-15,DFI LanParty DK P45-T2RS Plus, Powercolor HD 5870 1024MB , 2x WD Black Caviar 640GB Raid 0, 1x Samsung 250gb, 1x Maxtor 500GB IDE, Antec 900, Corsair TX-750.
Help Save Lives Join World Community Grid!
One question.
This board should do something special to update the bios? reset it or give a clear CMOS before installing another processor?
Or just upgrade and go?
If the problem persists speak to the people of DFI.
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
Zsamz Hi, I've tested many of the BIOS, now have the latest beta bios, but there is no way to make it work with the Q9650 ...
I tried to jumpers, putting the manual 1333MHz FSB with jumpers but nothing ..
Bios may be corrupt? this motherboard is dual bios? Is there a way to jump to the second bios?
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
a Q9650 defenatly works i have seen alot of them on this bord.
Q9550 @ 4.25 GHz, 500FSB, 2x2 GB OCZ Platinum 1066MHZ DDR2 @ 1001 MHz CL5-5-5-15,DFI LanParty DK P45-T2RS Plus, Powercolor HD 5870 1024MB , 2x WD Black Caviar 640GB Raid 0, 1x Samsung 250gb, 1x Maxtor 500GB IDE, Antec 900, Corsair TX-750.
Help Save Lives Join World Community Grid!
Hi, I tested with 1GB Crucial Ballistix module. (With the Q9650 installed)
The board seems to want to turn, but began to whistle, with constant short beeps.
I've been looking for information on the bios beeps awards and that kind of beeps means:
Constant short-Tone: The motherboard is faulty, ie it is broken is the worst thing that can happen.
But I do not understand how you can work with the E4600 and not the Q9650, and my processor (Q9650) is perfect, indeed, is working right now on the P5Q Pro Turbo.
Contact to the people of DFI to see what he says.
Greetings and thanks.
Back and forth from board to board it seems.
The C1 error is memory related. This board has a horrid vDimm vdrop of .1v. The board likes to reset to default vdimm of 1.8v which is really 1.7v when measured by a DMM. This makes it really hard for most memory sticks with D9's to post. Try posting with some non-D9 memory, set vDimm to 2.3v in BIOS, shutdown and then try your D9's again. I ended to doing a vdimm V'mod, but I still have issues with C1 from time to time.
Need some help here
I bench Dry Ice with my DFI DK P45 on saturday midnight
It work fine during the bench session
Now it won't power up
Power supply is there(mobo light light up)
Now i left it dry with heatpipe assembly removed
Any idea on what happend?
Desperately need help
Intel E8600 E0@420x10(H20)/Abit IP35 Pro/Team Xtreem DDR 2 1066mhz D9GKX@420mhz,5-4-4-11-2T /Crucial Ballistx Tracer DDR 2 800mhz 16FD3@420mhz 5-4-4-11-2T/Gigabyte GTX260 SOC@720/1512/1300/LG SATA DVD-RW/WD 320GB +Segate 1TB/Corsair HX520W/Enlight Lian Li OEM PC7A casew/W65A Side panel
Liquid cool: Dtek Fuzion V2,Swiftech MCR220,Swiftech Radbox,Swiftech Micro res,Nirox P2800 modded pump,Generic 1/2" ID tubing,3xYate Loon mid speed
Note:E8500 is 9.5x but cpuz got issue and X2 4600+ is oc with stock cooler,max validation and never push
9.204's PI
Any idea for my issue?
Intel E8600 E0@420x10(H20)/Abit IP35 Pro/Team Xtreem DDR 2 1066mhz D9GKX@420mhz,5-4-4-11-2T /Crucial Ballistx Tracer DDR 2 800mhz 16FD3@420mhz 5-4-4-11-2T/Gigabyte GTX260 SOC@720/1512/1300/LG SATA DVD-RW/WD 320GB +Segate 1TB/Corsair HX520W/Enlight Lian Li OEM PC7A casew/W65A Side panel
Liquid cool: Dtek Fuzion V2,Swiftech MCR220,Swiftech Radbox,Swiftech Micro res,Nirox P2800 modded pump,Generic 1/2" ID tubing,3xYate Loon mid speed
Note:E8500 is 9.5x but cpuz got issue and X2 4600+ is oc with stock cooler,max validation and never push
9.204's PI
take battery out for 20 min
or
bake it 380-400f for 7-8 min
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
Intel E8600 E0@420x10(H20)/Abit IP35 Pro/Team Xtreem DDR 2 1066mhz D9GKX@420mhz,5-4-4-11-2T /Crucial Ballistx Tracer DDR 2 800mhz 16FD3@420mhz 5-4-4-11-2T/Gigabyte GTX260 SOC@720/1512/1300/LG SATA DVD-RW/WD 320GB +Segate 1TB/Corsair HX520W/Enlight Lian Li OEM PC7A casew/W65A Side panel
Liquid cool: Dtek Fuzion V2,Swiftech MCR220,Swiftech Radbox,Swiftech Micro res,Nirox P2800 modded pump,Generic 1/2" ID tubing,3xYate Loon mid speed
Note:E8500 is 9.5x but cpuz got issue and X2 4600+ is oc with stock cooler,max validation and never push
9.204's PI
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
Intel E8600 E0@420x10(H20)/Abit IP35 Pro/Team Xtreem DDR 2 1066mhz D9GKX@420mhz,5-4-4-11-2T /Crucial Ballistx Tracer DDR 2 800mhz 16FD3@420mhz 5-4-4-11-2T/Gigabyte GTX260 SOC@720/1512/1300/LG SATA DVD-RW/WD 320GB +Segate 1TB/Corsair HX520W/Enlight Lian Li OEM PC7A casew/W65A Side panel
Liquid cool: Dtek Fuzion V2,Swiftech MCR220,Swiftech Radbox,Swiftech Micro res,Nirox P2800 modded pump,Generic 1/2" ID tubing,3xYate Loon mid speed
Note:E8500 is 9.5x but cpuz got issue and X2 4600+ is oc with stock cooler,max validation and never push
9.204's PI
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
Intel E8600 E0@420x10(H20)/Abit IP35 Pro/Team Xtreem DDR 2 1066mhz D9GKX@420mhz,5-4-4-11-2T /Crucial Ballistx Tracer DDR 2 800mhz 16FD3@420mhz 5-4-4-11-2T/Gigabyte GTX260 SOC@720/1512/1300/LG SATA DVD-RW/WD 320GB +Segate 1TB/Corsair HX520W/Enlight Lian Li OEM PC7A casew/W65A Side panel
Liquid cool: Dtek Fuzion V2,Swiftech MCR220,Swiftech Radbox,Swiftech Micro res,Nirox P2800 modded pump,Generic 1/2" ID tubing,3xYate Loon mid speed
Note:E8500 is 9.5x but cpuz got issue and X2 4600+ is oc with stock cooler,max validation and never push
9.204's PI
An update:
My motherboard does boot now
My question now is:What is the best BIOS for SPI 1M with E8600 processor?
Intel E8600 E0@420x10(H20)/Abit IP35 Pro/Team Xtreem DDR 2 1066mhz D9GKX@420mhz,5-4-4-11-2T /Crucial Ballistx Tracer DDR 2 800mhz 16FD3@420mhz 5-4-4-11-2T/Gigabyte GTX260 SOC@720/1512/1300/LG SATA DVD-RW/WD 320GB +Segate 1TB/Corsair HX520W/Enlight Lian Li OEM PC7A casew/W65A Side panel
Liquid cool: Dtek Fuzion V2,Swiftech MCR220,Swiftech Radbox,Swiftech Micro res,Nirox P2800 modded pump,Generic 1/2" ID tubing,3xYate Loon mid speed
Note:E8500 is 9.5x but cpuz got issue and X2 4600+ is oc with stock cooler,max validation and never push
9.204's PI
Intel E8600 E0@420x10(H20)/Abit IP35 Pro/Team Xtreem DDR 2 1066mhz D9GKX@420mhz,5-4-4-11-2T /Crucial Ballistx Tracer DDR 2 800mhz 16FD3@420mhz 5-4-4-11-2T/Gigabyte GTX260 SOC@720/1512/1300/LG SATA DVD-RW/WD 320GB +Segate 1TB/Corsair HX520W/Enlight Lian Li OEM PC7A casew/W65A Side panel
Liquid cool: Dtek Fuzion V2,Swiftech MCR220,Swiftech Radbox,Swiftech Micro res,Nirox P2800 modded pump,Generic 1/2" ID tubing,3xYate Loon mid speed
Note:E8500 is 9.5x but cpuz got issue and X2 4600+ is oc with stock cooler,max validation and never push
9.204's PI
Sorry for the bump, but is anyone using the latest 3TB drives on their boards? I want to update my current WD 500GB drives for something a bit larger.
I am running Windows 7 x64 so that should not be a problem.
I realize there are tools available from other manufacturers to overcome any problems, but I am curious about the dfi.
PC: Case: Zalman Z-Machine GT-1000 Black Brushed Alu - Screen: HP W2408H - Mobo: DFI Lanparty DK P45-T2RS PLUS - CPU: Intel C2Q Q9550 - Ram: Corsair Dominator 8GB PC2-8500 - GPU: MSI 460GTX OC 'Cyclone' - Sound: Asus Xonar D2X + Onkyo HT-S5105 5.1 set
Cooling Thermolab Baram + 2x tacens Ventus ice - Storage: OCZ Vertex 60GB, WD Caviar Black 1TB, WD Green 3TB - PSU: Corsair HX520 - Peripherals: Duck Orion TKL (MX Clears) + Roccat Kova mouse
Bookmarks