Scythe Releases Kaze Jyu Slim 100mm Case Fan

[Spawne32]

Scythe Co., Ltd (Tokyo, Japan) announces the new 100mm fan in super slim size! This product is originally equipped in the latest Scythe super slim CPU Cooler “Shuriken” to lower the overall dimension and weight of the CPU Cooler. This new case fan has super slim thickness (measured to be 100 x 100 x 12mm / 3.94 x 3.94 x 0.47 ic) to contribute the lower total height of your PC system. Just a case fan is simply not attractive for you? The item comes with the extra mounting kit for Hard Disk to conveniently convert this item as a Hard Disk cooler! Ideal replacement case fan for your HTPC system or simply to arrange your system to be more compact!

************************************************** **

Model Name:
Kaze Jyu Slim 100mm Case Fan (1000rpm)
Kaze Jyu Slim 100mm Case Fan (2000rpm)

Model Number:
SY1012SL12L (1000rpm)
SY1012SL12M (2500rpm)

Dimensions:
100 x 100 x 12mm / 3.94 x 3.94 x 0.47 ic

Specifications:
14.5dBA / 15.23CFM / 12V / 0.09A (1000rpm Version)
29.22dBA / 27.60CFM / 12V / 0.16A (2000rpm Version)

Connector:
3-pin (4-pin adaptor included)

Cable Length:
30cm / 11.81 ic

Bearing Type:
Sleeve

MTBF:
30,000 hours

MSRP:
8.80 (USD)
4.15 (EURO) excl. VAT

************************************************** **
For further information & images regarding this product, please visit our website at:

Kaze Jyu Slim Product Page (English)

http://www.scythe-eu.com/en/products...lim-100mm.html

[munim]

Oh what will they think of next!!

I could seriously use that on my Accelero S1 actually, a regular 120mm is hella bulky on there.

[eXa]

Seemes like a decent fan to cool your ram...

[Tonucci]

Being soo thin it may have bad pressure for heatsinks/rads... But should be nice for SFF cases.

[eXa]

Idd, the pressure will suck. But will do fine for free air aplication.

[Scubar]

too many small little fins to push enough air. 29db and only 29CFM, thats pretty awful

[saaya]

isnt that cfm rating very low?

[tetete]

arn't ppl all using 90mm or 120mm fans?

[ShadowGuy]

Do you think this would give any benefit to the GPU of an xbox 360? I'm considering buying one for that purpose, but curious about how the airflow would work.

[Xope_Poquar]

isnt that cfm rating very low?

For a 100mm fan at 29db I'd expect at least 35cfm.

[cozwin]

Do you think this would give any benefit to the GPU of an xbox 360? I'm considering buying one for that purpose, but curious about how the airflow would work.

depends on your intention to power it and where to put it.
you wont fit it inside case for defo.
power it off powersupply and say bye bye to it... most people power extra fans over the usb's.
Also youd probably see more performance gain sending xbox back to microsoft for the upgrade they do.
and maybe in future buy lian li xbox case coming out.

[duploxxx]

would like to see a 200-300mm fan like the antec big-boy but then with minimum db.

[Miwo]

two of these would fit pretty well on the Arctic Accelero S1.

[Spawne32]

you guys are taking note that these fans are 100x12mm, not 100x15mm, or 100x25mm, or 100x38mm

[ShadowGuy]

depends on your intention to power it and where to put it.
you wont fit it inside case for defo.
power it off powersupply and say bye bye to it... most people power extra fans over the usb's.
Also youd probably see more performance gain sending xbox back to microsoft for the upgrade they do.
and maybe in future buy lian li xbox case coming out.

Well I plan to put it right on top of (blowing downwards) into the gpu heatsink (the smaller one), powered off the 12v connection near the power plug. What I'm wondering is, will having a fan blowing on such a short heatsink, in a case where the only exhaust is behind it, be better than what I currently have? As of now I have a slab of clear plastic plexi about 1mm thick covering from the standard shroud to all but the last .25" of the heatsink (known as the 'fan shroud mod'). Should I make a new topic in another area (xbox, air cooling)? Not sure if this is thread jacking cause I have some other ideas and questions.

[[XC] Synthetickiller]

SO where's the RADs for 100mm fans?

[Helmore]

It would have been a nice fan if it would fit on this cooler from thermalright:
http://www.thermalright.com/new_a_pa...ler_trad2.html
That would make it a very low profile cooler which is ideal for CF.