itll work just fine with any older bios, it just wont be recongized as x940
itll work just fine with any older bios, it just wont be recongized as x940
Thanks, also Newegg states that this MB supports 8Gb of RAM, however on Foxconn's website it says 16Gb. Which is correct?
Will the 940 support 8Gb of ddr1066? Or will it have to run @ ddr800?
Thanks again!
AMD Phenom II 940 @ 3.6Ghz
Foxxconn Destroyer (Bios P14)
2X2Gb Ocz Reaper 1066 @ 533Mhz
36Gb Raptor + 250Gb WD SATA II + 2x WD Black 1TB
XFX 8800GTS 320MB SLI
PC Power & Cooling Silencer 750
ZALMAN 9900
ANTEC NINE HUNDRED
any news on nb adjustments
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
i guess i was gonna use this board for our gtx295 sli test but if it cant adjust the nb then it sucks
Amd Nvidia/Ati -3dmark06 scorebord revisted
asus L1N64-ws or /b depending on bios chip
4x1gig 8500 gkill bpk
2x opteron 8224 @ 3.8ghz
http://www.xtremesystems.org/forums/...&postcount=236
vga= 8800gt
winxp pro
custom chiller -31 water
2x dtek fuzions
bix3-with x3panaflo hi output
antec 850 quattro
heat under msimax abitmax and dfimax
Well it would be nice if you people at the foxx would PLEASE fix this bios issue with the multi on NB not working. I REALLY digg this board "Destroyer" and know that my 8750BE would be able to shine if I could drop the NB HTT down a few.
missing it too
and i dunno why aegis panel isnt working for me...
Dont feel bad the Aegis panel didn't work for me ether. This mobo is sooooo easy to clock with except for the NB multi.
WAKE UP FOXCONN!! I love this board, and my overclocks seem very stable however the lack of ANY semblance of support has convinced me to never buy foxconn again. No NB multi+ no Aegis panel+ no fixes=TERRIBLE
AMD Phenom II 940 @ 3.6Ghz
Foxxconn Destroyer (Bios P14)
2X2Gb Ocz Reaper 1066 @ 533Mhz
36Gb Raptor + 250Gb WD SATA II + 2x WD Black 1TB
XFX 8800GTS 320MB SLI
PC Power & Cooling Silencer 750
ZALMAN 9900
ANTEC NINE HUNDRED
I'm using the Destroyer now for about two weeks and I choosed the board because of its great layout and excellent quality. I also looked over the problem of the malfunction of the CPU-NB Multi, therefore I was convinced that Foxconn would fix this problem in a couple of time.
While working, especially overclocking with the Destroyer and a Phenom II 940 I encountered some issues that also should be fixed:
1. Raising the Reference Clock in the bios above 250Mhz results in unprecise Clocks in fact, due to CPU-Z. 250Mhz does effect correct 2250Mhz HT and NB Clock. 251Mhz in contrast results in weird Clocks like 249.1Mhz Ref., 2241,9 HT and NB, additonally, the CPU Clock also doesn't match the bios clock. 252Mhz is identically (!) with the 251Mhz-Option, while 253Mhz in Bios results in a CPU-Z-Clock of 252.1Mhz.
2. Setting the nforce780a SATA-Controller to AHCI Mode make it impossible to check the SMART-attributes, they are simply invisible, just like the temperatures of the Hard Drives. Additionally, while in AHCI mode, all Hard Disks are "invisible" in the bios. Is this a chipset-related issue or rather a problem of the bios?
Besides these problems I like the board a lot and I hope the next bios will fix the most annoying bugs.
I own one. Love it. I wish they fix the NB issue soooon.
Just out of curiosity is there a newer bios then p14 available, Beta or retail?
*Bump for necro-support?
Computer:
CPU: PII X6 1055t @ 3.7Ghz
Motherboard: MSI NF980-G65
Memory: G.SKILL Ripjaws 8GB(4X2) 4GBRL DDR3 1600
Graphics: Tri-SLI Gtx470's
Power: Corsair AX1200
Case: CM HAF-X
Monitors: 3x ASUS VG236H -120HZ/3D
ya, I also would like to know if there's a new BIOS some ware.
I have never spent so much on a mother board before this one, and would love for every thing to actually work like it is supposed to.
ASRock Z77 Extream6
Intel i7 3770K
G.SKILL Sniper Series 16GB (4 x 4GB) DDR3 1866
OCZ Agility 3 120GB SATA III
Western Digital Caviar Black 640GB
CORSAIR HX1050
GIGABYTE GTX 770 4GB
This soooo sucks balls. i love this mobo but man how frickin hard could it be after all this time has gone by to fix the NB multi unless Fox is going to come out with a new board to replace this one. It might come with the 980a chipset
Even if they do come out with a "replacement" that is another $200+ I would seriously have to consider purchasing. What is sad is that this board never really took off due to the phenom 1's sucking. Well the PII's came out and then this board/chipset showed it's true potential.
But apparently the damage was already done, sells were too low, and the economy was just too bad to support the board after the release.
It's a great board imo, but the nb issue really limits certain peoples oc abilities, and that is just ridiculous for an enthusiast mobo.
You can have the dogtags and plexi mobo tray, I want my nb setting!
Computer:
CPU: PII X6 1055t @ 3.7Ghz
Motherboard: MSI NF980-G65
Memory: G.SKILL Ripjaws 8GB(4X2) 4GBRL DDR3 1600
Graphics: Tri-SLI Gtx470's
Power: Corsair AX1200
Case: CM HAF-X
Monitors: 3x ASUS VG236H -120HZ/3D
Last edited by CobraXP; 04-28-2009 at 11:04 AM.
Intel System
CPU: Intel i7 990x ES @ 4.2GHz 24/7 still kicking!
Mobo: Foxconn BloodRage X58 P11 Bios
Ram: Corsair Dominator 12GB DDR3
Water Cooling: Apogee XT, MCP655-B pump, MCR220 radiator, XSPC 5.25" Bay reservoir
Videocard: EVGA Nvidia FTW+ GTX 1060 6GB
OS HDD: Samsung 950 Pro 512 MB M.2
Strorage HDD: W.D. VelociRaptor 300GB
Storage HDD: W.D. 500GB
PSU: Enermax Evo Galaxy 1250 Watt
Case: Cooler Master Cosmos S
Roms: Lite On DVD Burner
Roms: Asus Bluray Burner
OS: Windows 7 Ultimate 64-bit
OK new bios prob. It could be me on this one. I did this all during a long lunch got busy and left it alone. I installed a PII X4 955BE. It only showed up at 800MHz. I have the P14 bios which says "AM3" support. I tried clocking everything manually. Am I doing something wrong??? I will mess with it when I get out of work. Thx.
Intel System
CPU: Intel i7 990x ES @ 4.2GHz 24/7 still kicking!
Mobo: Foxconn BloodRage X58 P11 Bios
Ram: Corsair Dominator 12GB DDR3
Water Cooling: Apogee XT, MCP655-B pump, MCR220 radiator, XSPC 5.25" Bay reservoir
Videocard: EVGA Nvidia FTW+ GTX 1060 6GB
OS HDD: Samsung 950 Pro 512 MB M.2
Strorage HDD: W.D. VelociRaptor 300GB
Storage HDD: W.D. 500GB
PSU: Enermax Evo Galaxy 1250 Watt
Case: Cooler Master Cosmos S
Roms: Lite On DVD Burner
Roms: Asus Bluray Burner
OS: Windows 7 Ultimate 64-bit
OK. I spoke to someone at Foxconn in Cali. He was very nice and helpful. He told me that he would call HQ regarding the bios update and email my company back on this. I am hoping this gets resolved soon cause my company has sold these boards mainly for the AMD/Nvidia setups. I like the product alot and would like to stick with it for awhile like I have with OCZ ram and Evga videocards. I will keep you guys updated.
Intel System
CPU: Intel i7 990x ES @ 4.2GHz 24/7 still kicking!
Mobo: Foxconn BloodRage X58 P11 Bios
Ram: Corsair Dominator 12GB DDR3
Water Cooling: Apogee XT, MCP655-B pump, MCR220 radiator, XSPC 5.25" Bay reservoir
Videocard: EVGA Nvidia FTW+ GTX 1060 6GB
OS HDD: Samsung 950 Pro 512 MB M.2
Strorage HDD: W.D. VelociRaptor 300GB
Storage HDD: W.D. 500GB
PSU: Enermax Evo Galaxy 1250 Watt
Case: Cooler Master Cosmos S
Roms: Lite On DVD Burner
Roms: Asus Bluray Burner
OS: Windows 7 Ultimate 64-bit
hohoho.. about time there was some discussion here on something -other- than bloodrage.
XmX
Last edited by XmikeX; 04-28-2009 at 01:54 PM.
Yeah I was hoping to test out 3xGTX275s this weekend with the P2 955. This is what I have going on the 940 with 2xGTX275.... my customers dig the new Phenoms with Nvidia cards....
3.8Ghz...
3.6GHz not much different.
Last edited by CobraXP; 04-28-2009 at 02:50 PM.
Intel System
CPU: Intel i7 990x ES @ 4.2GHz 24/7 still kicking!
Mobo: Foxconn BloodRage X58 P11 Bios
Ram: Corsair Dominator 12GB DDR3
Water Cooling: Apogee XT, MCP655-B pump, MCR220 radiator, XSPC 5.25" Bay reservoir
Videocard: EVGA Nvidia FTW+ GTX 1060 6GB
OS HDD: Samsung 950 Pro 512 MB M.2
Strorage HDD: W.D. VelociRaptor 300GB
Storage HDD: W.D. 500GB
PSU: Enermax Evo Galaxy 1250 Watt
Case: Cooler Master Cosmos S
Roms: Lite On DVD Burner
Roms: Asus Bluray Burner
OS: Windows 7 Ultimate 64-bit
Bookmarks