Forum Support

[dinos22]

Give it time my young padawan, with more skillful use you will be capable of so much more
*cough*

ROFL

[saaya]

Give it time my young padawan, with more skillful use you will be capable of so much more
*cough*

man that just sounds plain wrong

http://www.newegg.com/Product/Produc...82E16820220287

This Patriot Viper DDR3-1866 gives a E0 BIOS LED Debug error code when used within the Blackops. Other forum members have said that the only way this RAM will Post is if you reflash the RAM and remove the XMP part.



This Super Talent http://www.newegg.com/Product/Produc...nt%2bddr3-1800
arrived with 1 dead stick in the pack of 2. 1 stick works fine the other gives a "E1" error. It will not Post in any memmory slot and with BIOS voltages set higher on both the DRAM and NB.

I'll RMA the Super Talent today. And I'll try the Patriot 1866 in the Asus P5Q3 that arrives on Tuesday.
But I still need some 1800+ Ram for my Blackops that will work right out of the box.


AL (The Fonz)

hmmmmmmmmmm
that sounds very weird...
who told you that reflashing the spd fixes the problem?
did he/they get the stick to boot fine on other boards with the original spd?
if you boot at setup defaults xmp is disables... sham talked to the bios engineer yesterday and he said xmp is disabled, actually its completely ignored... so this sounds very weird...
i just told shamino, we are gonna check this with the bios engineer on monday

[Kensek]

if anybody have patriot 1866C8 with xmp profiles,before pluging them on the black ops,just remove the xmp profile,otherwise you will see the E0 debug code all the time with bioses ,G17,G20,G21,G22,P02
(realy,where the hell are the debug codes of this mobo?,they put in trimmers for vmods and the necessary debug codes.........)

This guy on the forum said E0 error on the Patriot Viper is caused by the XMP. And you need to remove it in order for the Ram to work on the BlackOps.

But as I said, I'll try the Viper Ram in my new Asus P5Q3 coming on Tuesday. If it doesn't work in that Board, I'll RMA them.

AL (The Fonz)

[saaya]

k, thanks, i will pm that guy to check why he thinks the xmp caused the problems

[Kensek]

k, thanks, i will pm that guy to check why he thinks the xmp caused the problems

The Asus P5Q3 arrived today and I installed the Patriot Viper DDR3-1866 sticks. The P5Q3 booted up flawlessly with them.

However, the BlackOps will cause this Ram Module in every BlackOps out there not to POST because of an E0 error caused by the XMP.

Please fix this you Techie Geniuses with a BIOS update !!

PLEASE.

AL (The Fonz)

[LardArse]

The Asus P5Q3 arrived today and I installed the Patriot Viper DDR3-1866 sticks. The P5Q3 booted up flawlessly with them.

However, the BlackOps will cause this Ram Module in every BlackOps out there not to POST because of an E0 error caused by the XMP.

Please fix this you Techie Geniuses with a BIOS update !!

PLEASE.

AL (The Fonz)

ok!

[saaya]

for now, could you please make a dump of the spd on the p5q3 using spdtool and post it here?

[axlros75]

Sorry guys,
anyone knows when Foxconn Dreadnoughts (790i) will be on stock?

Thanks

[Kensek]

Not sure if this will help. It looks like SPDTool 0.62 cannot read the memory info due to the new P45 chipset on this Mobo.


AL (The Fonz)

[SoF]

good to have you guys as a direct support here maybe you will hate me soon as I can be a pain when something is good but it can be faster

[saaya]

kensek, hmmmmm did you try systool?
sof, not really, if its valid constructive criticism its very welcome!

[BustaH]

Good to see this thread. Im currently waiting for my Blackops rma to be returned/replaced so its good to know you guys are here.

[saaya]

glad to help