ES Q9550 E0 @ 4.0GHz (471x8.5) 1.256v
TR-Ultra-120-X, 115CFM 120mm fan
Maximus II Formula @ 1884MHz FSB
Ballistix DDR2-800 (4x1GB) 1132MHz 5-5-5-5-15 4-55-8-14-11-3-8-5-4-2T
eVGA GTX 280 @ 702c/1404s/1260m (1.175v)
Auzentech XPlosion DTS-Interactive Vantage 'X'-6,727
300GB Velociraptor, PC P&C 750W
(3)120mm, (2)90mm, (1)250mm case fans in TT Armor
27.5" LCD/Z-5500-office, 95" 720P projector/7.1ch-living room
Logitech Driving Force Pro-Microsim Racing Pod
CryptiK I have Crucial Ballistix 4GB kit BL2KIT25664AA80A
i7 2600K @ 4.5GHz 1.28v 24/7 with offset mode + Venomous X black - ASUS Maximus IV Extreme R3.0 - EVGA GTX 570 SC - Corsair Dominator GT 2x2GB 2000MHz CL8 @ 2133 Cl9 + AIrFlow PRO- Corsair AX850W - Silverstone Fortress 2 - LC back soon My Gaming account on >> YouTube
Guys
A quick question, i have a raid 0 made on the MF2, i will go for the Giga P45 UD3P, do i have to build the raid again ?
Thank you
Sergio
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
No you won't. I've done this since the ICH5R days (2003) and you just install the new motherboard then remember to set the RAID option in your BIOS (known by different names unfortunately, but you'll find it for sure). You can always make a backup to be on the safe side. Windows will even load without re-installation unless there's a new driver issue that crops up related to other components on the new motherboard. All in all I wouldn't worry too much about this, just remember if one hard drive fails (i.e. you knock it real hard when rebuilding your PC) then all your data goes flop.
+ Asus Maximus Formula II (Bios 2202)
+ Intel Xeon X3370 @ 4.04GHz 1.288V (475x8.5) VID 1.250
+ 4GB Kingston HyperX PC2-9600 DDR2 @ 1199MHz 5-5-5-18-2-30 @ 2.15V
+ BFG Tech 9800GTX+ OC @ 760/1890/2250
+ 4x150GB Raptor X in RAID0 via Adaptec 2405 SAS/SATA
+ Samsung SH-203B
+ Chieftec CFT-850-14C
+ Thermalright 120 Ultra Extreme 2000rpm
+ Windows XP Professional x64
+ Samsung 275T
Laptop Memory UK
Thank you e.v.o and GFORCE100 !!!
Cheers
Sergio
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Hey guys,
Where is the overclocking guide by Simps on reaching 500FSB? I can't seem to find it.
Thanks.
XSWCG Disclaimer:
We are not responsible for the large sums of money that you WILL want to spend to upgrade and add additional equipment. This is an addiction and the forum takes no responsibility morally or financially for the equipment and therapy cost. Thank you and have a great day.
Sigmund Freud said... "Failure to CRUNCH is a sign of Sexual Inadequacies".
Page 109 mate.
http://www.xtremesystems.org/forums/...postcount=2718
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
New toy came today, first run no tweaks yet.
Last edited by Grnfinger; 02-27-2009 at 03:24 PM.
XSWCG Disclaimer:
We are not responsible for the large sums of money that you WILL want to spend to upgrade and add additional equipment. This is an addiction and the forum takes no responsibility morally or financially for the equipment and therapy cost. Thank you and have a great day.
Sigmund Freud said... "Failure to CRUNCH is a sign of Sexual Inadequacies".
Now that I got bored and decided to take off the heatsink from my formula to put some different paste on, and took the northbridge chip slightly off with it rma is otw, didnt have any trouble get that done, and finally have a reason to get me a MF2 which will be here monday. Cant wait for my MF2 to get here. Just hoped to get it under different circumstances.
2X Dell 2407WFP 3200X1200
Asus MFII 2302
Q9550 C1 3.9
TRUE-120EX Black {lapped}
G.Skill F2-9600CL5D-4GBPI (1170)
Sapphire HD 6870
150gb VRaptor Windows 7x64
Corsair 620HX
Black TT Armor+
Q9650 @ 4.2GHz
Extreme Tweaker
Ai Overclock Tuner : Manual
OC From CPU Level Up : AUTO
CPU Ratio Control : Manual
- Ratio CMOS Setting : 9
FSB Frequency : 467
CPU Clock Skew : Normal
North Bridge Clock Skew : Normal
FSB Strap to North Bridge : 333
DRAM Frequency: DDR2-1121
Dram Clock Skew CH1 A1 : Normal
DRAM Clock Skew CH1 A2 : Normal
Dram Clock Skew CH1 B1 : Normal
Dram Clock Skew CH1 B2 : Normal
DRAM Timing Control: Manual
CAS# Latency : 5
RAS# to CAS# Delay : 5
RAS# Precharge : 5
RAS# ActivateTime : 15
RAS# to RAS# Delay : 3
Row Refresh Cycle Time : 55
Write Recovery Time : 6
Read to Precharge Time : 3
Read to Write Delay (S/D) : 8
Write to Read Delay (S) : 3
Write to Read Delay (D) : 5
Read to Read Delay (S) : 4
Read to Read Delay (D) : 6
Write to Write Delay (S) : 4
Write to Write Delay (D) : 6
Write to PRE Delay : 14
Read to PRE Delay : 5
PRE to PRE Delay : 1
ALL PRE to ACT Delay : 5
ALL PRE to REF Delay : 5
DRAM Static Read Control: Enabled
Dram Read Training : Disabled
MEM OC Charger : Enabled
Ai Clock Twister : Stronger
Transaction Booster : Manual
Common Performance Level [8]
Pull-In of CHA PH1 Disabled
Pull-In of CHA PH2 Disabled
Pull-In of CHA PH3 Disabled
Pull-In of CHA PH4 Disabled
Pull-In of CHA PH5 Disabled
Pull-In of CHB PH1 Disabled
Pull-In of CHB PH2 Disabled
Pull-In of CHB PH3 Disabled
Pull-In of CHB PH4 Disabled
Pull-In of CHB PH5 Disabled
PCIE Frequency : 103
CPU Voltage : 1.3625
CPU PLL Voltage : 1.56625
FSBT : 1.37825
DRAM Voltage : 1.9
North Bridge Voltage : 1.45775
South Bridge Voltage 1.5 : 1.5
South Bridge Voltage 1.1 : 1.1
CPU GTL Reference 0 : Auto
CPU GTL Reference 1 : -45mv
CPU GTL Reference 2 : Auto
CPU GTL Reference 3 : -45mv
North Bridge GTL Reference : AUTO
DDR2 Channel A REF Voltage : AUTO
DDR2 Channel B REF Voltage : AUTO
North Bridge DDR Reference : AUTO
Load Line Calabration : Enabled
CPU Sread Spectrum : Disabled
PCIE Spread Spectrum : Disabled
very nice grnfinger.so how are you liking it so far?
_________________________________________________
............................ImAcOmPuTeRsPoNgE............................
[SIGPIC][/SIGPIC]
MY HEATWARE 76-0-0
Nice clocks Grnfinger! Is it stable @ 500mhz fsb?
Project ZEUS II
Asus Rampage II Extreme
Intel I7 920 D0 3930A @ 4.50GHz (21 X 214mhz)
3 x 2GB G.Skill Trident 1600 @ 1716MHz (6-8-6-20-1N)
2 x Asus HD 6870 CrossFire @ 1000/1100MHz
OCZ Vertex 2 60GB | Intel X25-M 120GB | WD Velociraptor 150GB | Seagate FreeAgent XTreme 1.5TB esata
Asus Xonar DX | Logitech Z-5500 | LG W2600HP 26" S-IPS LCD
Watercooling setup:
1st loop -> Radiator: 2 x ThermoChill PA120.3 | Pump: Laing DDC-3.25 with Alphacool HF 38 top | CPU: Swiftech Apogee XT | Chipset: Swiftech MCW-NBMAX | Tubing: Masterkleer 1/2" UV
2nd loop -> Radiator: ThermoChill PA120.3 | Pump: Laing DDC-3.2 with Alphacool HF 38 top | GPU: 2 x EK FC-6870 | Tubing: Masterkleer 1/2" UV
Assembled in Mountain Mods Ascension Trinity
Powered by Corsair Professional Series Gold AX1200
Managed to reduce my vCore for 467x9 4.2GHz
Now to work on 500FSB
My last play with this 'board series....Now moved to i7 920 on REII
Q9650 @ 4.3GHz
Asus is trying to fix the bugs with i7, altho the P5 just got a new bios
Last 2 emails from Asus have all been P6T and P5Q bios updates.
I hope to see a working bios to unleash the potential of this board but I'm not holding my breath.
One thing is for sure atleast Asus has been consistant on this board.
"High Quality is never an accident. It is always the result of excellent intention, intelligent direction, sincere effort and skillful execution. It represents the wisest choice of many alternatives"
System Specs:
R3E + custom 1601 bios / XEON X5650 6-Cores @ 4ghz / G-Skill RipJaws 12GB Kit / Asus Radeon HD EAH5870 / Crucial C300 x 2 R0 + 2 x Samsung 840 Pro's on ICH / Logitech Z-5500 5.1 / Ultra X3 1000w PSU
Water Cooling by:
Swiftech Apogee GTZ / EK FC5870 Acetal+Copper / Swiftech MCP655 / ThermoChill PA120.3 / 6 Gentle Typhoons AP-15 / XSPC Dual Bay Res
PrimoFlex Pro LRT UV Green 1/2" / XSPC Black Chrome Compression Fittings
Misc:
SilverStone TJ07 / 24" Dell UltraSharp / Yadda Yadda lol...
For me it'll also be the last mainboard from Asus i paid for. (omg,.. is this some correct sentence? ^^)
Well,.. i just put up a new mBIOS but this one really isn't the big hit.
http://www.megaupload.com/?d=NYYM2S9T
I have for now two versions:
1901.1xx - only updated ROMs/µCode Updates, this is intended for stability
1901.2xx - based on 1901.1xx, tweaked a bit here and there...
Code:=--------------------= [ mBIOS.1901.1xx ] =--------------------= [ mBIOS.1901.1xx ] ------------------ No link for .1xx package [ mBIOS.1901.101 ] ------------------ http://megaupload.com/?d=WE10MKNR Base: mBIOS.1901.100 Updated:Intel(R) RAID for SATA: v8.6.0.1007 from v8.5.0.1030 [ mBIOS.1901.100 ] ------------------ megaupload.com/?d=16JCVX3W Updated:Intel(R) RAID for SATA: v8.5.0.1030 from v8.0.0.1038 Intel Boot Agent GE: v1.3.24 from v0.0.19 Marvell 88SE6121 RAID: 1.1.0.L72a from 1.1.0.L70d =--------------------= [ mBIOS.1901.2xx ] =--------------------= [ mBIOS.1901.2xx ] ------------------ http://megaupload.com/?d=NYYM2S9T [ mBIOS.1901.201 ] ------------------ Base: mBIOS.1901.200 Updated:Intel(R) RAID for SATA: v8.6.0.1007 from v8.0.0.1038 Intel Boot Agent GE: v1.3.24 from v0.0.19 Marvell 88SE6121 RAID: 1.1.0.L72a from 1.1.0.L70d [ mBIOS.1901.200 ] ------------------ Base: Orginal Maximus II Formula BIOS: 1901 Updated:3 CPU µCodes Changed:Some minor changes to SMBIOS Bootlogo Added: 2 CPU µCodes
Bookmarks