Swapped the red LED for some blue ones I think it looks better.
Swapped the red LED for some blue ones I think it looks better.
Wow @ your cables, all outside the case Even the power supply isn't in it!
i7 2600K @ 4.6GHz/Maximus IV Extreme
2x 4GB Corsair Vengeance 1866
HD5870 1GB PCS+/OCZ Vertex 120GB +
WD Caviar Black 1TB
Corsair HX850/HAF 932/Acer GD235HZ
Auzentech X-Fi Forte/Sennheiser PC-350 + Corsair SP2500
The system is waiting a new motherboard, everything is pulled out of the case. That is an old psu I use for numerous things, not the psu I am using for the rig.
Oh, right Well, I'm getting one for christmas, can't wait to set up my computer in this awesome case!!!
i7 2600K @ 4.6GHz/Maximus IV Extreme
2x 4GB Corsair Vengeance 1866
HD5870 1GB PCS+/OCZ Vertex 120GB +
WD Caviar Black 1TB
Corsair HX850/HAF 932/Acer GD235HZ
Auzentech X-Fi Forte/Sennheiser PC-350 + Corsair SP2500
Great case for sure. The one cool thing about it (if you didn't know) is that you can install LEDs in the other two fans. Because they use the same fan mold to make the fans. Also ALL THE plastic is removeable on the front panel.
---------------------------------------------------
Core i7 940 @ 4.1 ghz
2 way SLI GTX 260 SSC-55nm
Gigabyte GA-EX58-Extreme
TFC Xchanger - Triple Radiator 360
TFC Xchanger - Quad Radiator 480
Swiftech Laing D5 Vario MCP655 12V DC Pump
11 Yate Loon 2200-rmp
2 Ek GTX 260 waterblocks
GTZ waterblock
HAF 932 CoolerMaster Case
G5 mouse
G15 keyboard
12 gigs of Corsair Dominator with DHX
Corsair dominator ram cooler
1100watt Utimate PSU Coolermaster
---------------------------------------------------
How would you guys compair it to the Cosmos 1000?
Case: Cooler Master 1000
MB: Gigabytes GA-990FXA-UD3
CPU: AMD FX-6300 3.5Ghz Stock
RAM: Ocz 4GB(2x2GB) DDR3
GPU: Nvidia EVGA GeForce GTX 560 Ti FPB
PSU: Corsair RM1000
CPU: Stock for now
My Heat
Better for WCing and cable management, if I understand correctly
i7 2600K @ 4.6GHz/Maximus IV Extreme
2x 4GB Corsair Vengeance 1866
HD5870 1GB PCS+/OCZ Vertex 120GB +
WD Caviar Black 1TB
Corsair HX850/HAF 932/Acer GD235HZ
Auzentech X-Fi Forte/Sennheiser PC-350 + Corsair SP2500
I say go for the Cololer Master ATCS 840. Don't get me wrong, I love this case.
The ATCS 840 is a little bigger inside and cleaner exterior look! Look Here!
My setup is on Post 230
ASUS Rampage II Extreme | i7 920 cpu | Corsair Tri Channel 6 GB | GTX 580 FTW Hydro | Corsair P256 SSD| 4 TB OF HDD | Corsair HX1000 PSU
Loop #1: TFC 480 | KOOLANCE 350 BLOCK | Loop #2: TFC 360 | FTW HYDRO | Swiftech NB Block | MM Pinnacle 24 Case
HEAT
Current on going build, Mountain Mods Pinnacle 24
Ryzen 5 7600-Deepcool GammaxxV2-Gigabyte B650M GAMING X AX-16 GB Corsair DDR5-Gigabyte Eagle 6700XT-Corsair RM650-5x Artic Silver 140mms-Carbide 400R-Acer B246WL-FiiO E10/M40x-Fiio K5 Pro/LP6-M5/BLON-3.
I'll be getting a HAF for Christmas and plan on painting the inside flat black, but was wondering if
a) drilling the rivets out was necessary to painting the interior and
b) if I could get away with a light scuffing of the surface and paint as opposed to priming, etc.
New System
Asus Maximus II Formula | E8400 | 4 Gb Corsair Dominator DDR2 1066 5-5-5-12 | Sapphire Radeon 4850 1 Gb
2 x 500 Gb Seagate 7200.12 Raid0| Supreme FX X-Fi| OCZ Gamextreme 700 watt
XP 32-bit/Win 7 beta 64-bit| Zallman 9900| HAF 932
Old System
GIGABYTE GA-EP45-UD3R | Pentium D 805 @ 3.7 Ghz | 3 Gb XMS DDR2 800 Mhz 5-5-5-12 | ATI AIW x1900
2 x 160 Gb Seagate 7200.9 |Audigy 2 ZS | Cooler Master eXtreme Power Plus 500 Watt |Zallman 9500 AT | Lian Li PC61
I didnt take the rivets out, just taped around with blue painters tape after scuffing with 200 grit sand paper. worked great.
Make sure you get spray paint for metal. I used a Matte finish but semi-gloss or even gloos will look pimp
Now powder coating will look great. Too bad nearest shop to me is 190 miles over a snow covered pass, other wise that would have been my route.
ASUS Rampage II Extreme | i7 920 cpu | Corsair Tri Channel 6 GB | GTX 580 FTW Hydro | Corsair P256 SSD| 4 TB OF HDD | Corsair HX1000 PSU
Loop #1: TFC 480 | KOOLANCE 350 BLOCK | Loop #2: TFC 360 | FTW HYDRO | Swiftech NB Block | MM Pinnacle 24 Case
HEAT
Current on going build, Mountain Mods Pinnacle 24
I have a crazy urge to paint the entire thing in a black or dark grey pearl and use a combo of blue and white lighting, but for now I have neither the time or cash. Thanks for the info!
New System
Asus Maximus II Formula | E8400 | 4 Gb Corsair Dominator DDR2 1066 5-5-5-12 | Sapphire Radeon 4850 1 Gb
2 x 500 Gb Seagate 7200.12 Raid0| Supreme FX X-Fi| OCZ Gamextreme 700 watt
XP 32-bit/Win 7 beta 64-bit| Zallman 9900| HAF 932
Old System
GIGABYTE GA-EP45-UD3R | Pentium D 805 @ 3.7 Ghz | 3 Gb XMS DDR2 800 Mhz 5-5-5-12 | ATI AIW x1900
2 x 160 Gb Seagate 7200.9 |Audigy 2 ZS | Cooler Master eXtreme Power Plus 500 Watt |Zallman 9500 AT | Lian Li PC61
i didnt use primer on mine. just flat black spray paint
really? excellent result, the paint does not go away?
360 rad vertical front + 240 rad on top, inside. Wainting on another 240 on the bottom
Last edited by kiparosu; 12-20-2008 at 05:28 AM.
NAME:
CPU: e8500 @ 3.7 for now, stock volts
COOLING: xigmatek HDT-1283 (water coming soon)
MOBO: MSI p35 neo2-fir
VGA: Club3d 3850, 830/1060 (stock volts!!! modded gx810 cooler) (4850 iceq3 coming soon)
RAM: 2gb tracers 1066@940 CL4 (1.85 V)
CASE: CM690
PSU: Corsair VX550
HDD: WD3200AAKS
Drill rivets, move cage 2cm to the inside of the case, drill new holes and put some nice screws. That's all there is to moving the hdd cage. Part of the floor of the 5.25" bays has to go too.
still some damn nice job, mate!
plain and straight......
Raidmax ATOMIC - Core i7 3770s + Corsair H70 // Gigabyte H77N WIFI // Corsair Vengeance 2x4GB 2133mhz // EVGA GTX1060 ACX2.0// Kingston SUV400 480Gb // Sharkoon SFX500L
I Love it very nice to put the tripple in front like that. Its a very nice mod cant wait to get home to start on my HAF mods you guys are inspiring me ..
I'm already have this lovely case and want to figure out the best mounting position for installing Thermochill PA 120.3 at the top because the mounting holes in this case can not match with PA 120.3. Yeah, PA 120.3 is little bigger and longer than others.
Any recommendation position with pict for installing HAF 932 with PA 120.3?
Hi all
just joined ''HAF932 Club''
here some few shots .. after paint job
well but , just a quick question ...as i installed a NZXT Sentry LX Fan controller ..
Does anybody have that same controller installed ? it seems like those ''big fans'' does not allow to adjust speeds via this NZXT Sentry LX ?
they show the speed even if i break down them by hand .. but no selectable .. have tried all ports, manual and auto mode .. all 5 fan ports ports seem to be working if only plug in some other 120 ordinary fan ( every other fan could be adjusted .. also adjustments works with HAF's 140mm rear stock fan ..
but only thes ''Big ones'' cant be adjusted or stopped via NZXT Sentry lx
maybe somebody have this same controller ->
and have any ideas about this problem ?
Thank You
----
Happy New Year
Maximus Extreme / Air // E8400 // Noctua NH-C12P
Asus 8800 ULTRA /Stock Air/
G.SKILL F3-10600CL8D-2GBHK
Tagan TG700-BZ // Antec P182 B
Rampage Extreme / Air // QX9650 // True120 Black
A-Data DDR3-1600G 3x2gb kit (using 2 modules 2x2b)
((CellShock (MSC CS3222580) ) dead
Sapphire HD 4870x2 (single) stock Air
Be Quiet! Dark Power Pro 1KW // HAF'932
Bookmarks