"ASUS P5Q Deluxe discussion".

[Chri$ch]

580FSB SuperPi 1M and Everest memory benchmark

OS = Win XP SP3 / no tweaks

[R@ptor =]]]

Somebody can test a overclock with a diferent 1:1 fsb:ram?
i will use 450~480 fsb in my E6750, but i want try more frequency in my tracers

[Polizei]

Got a question about the back panel IO...

If you look here at this link, specifically the bottom right picture of the back panel IO.

Under the orange analog audio jack, what's that small hole to the diagonal lower left?

[R@ptor =]]]

Got a question about the back panel IO...

If you look here at this link, specifically the bottom right picture of the back panel IO.

Under the orange analog audio jack, what's that small hole to the diagonal lower left?

In this link that you sent, the text show some informations: the mobo accepts ddr2 and ddr2 memories!
"As we've mentioned, the P45 chipset is manufactured using Intel's 65nm process node. The chipset can support either DDR2 or DDr memory technologies and 800MHz - 1.33GHz Front Side Bus frequencies, although a 1.6GHz FSB will be unofficially supported by many P45 motherboards. DDR3 memory speeds of up to DDR3-1333 and DDR2 speed of up to DDR2-1066 are officially supported, but once again, higher speeds are attainable through overclocking."
BUT
At the site of Asus, the information is other!
"1200/1066/800/667 MHz to meet the higher bandwidth requirements of the latest operation system, 3D graphics, multimedia, and Internet applications. The dual-channel DDR2 architecture doubles the bandwidth of your system memory to boost system performance, eliminating bottlenecks with peak bandwidths of up to 19.2GB/s. "
Can anyone explain?

[Leeghoofd]

It's not written down in the manual, it's the Coaxial S/PDIF Out Port but the tiny hole might eg just be there for connecting a jack better if it has a purpose at all... you got good eyes mate...


450FSB / RAM AT 1081Mhz Will be back in a few days with the magical Gkills which can/could do 1200Mhz)




The chipset can support DDR2 and 3 but if Asus puts on the P5Q Dlx only DDR2 slots no way you are getting DDR3's to work... eg PCB difference between eg P5K Dlx and P5K3 Dlx was only the DDR2 and DDR3 slots ( wild guessing, just to make an example don't shoot the messenger plz )...

Some mobo's have both DDR2 and DDR3 slots onboard (MSI, Foxconn)...

[Jupiler]

I'm thinking about getting the P5Q-Pro, as it is the only board available ATM, and it costs around 100€.
Not sure if should go for it or wait a another week, before the Deluxe becomes more and more available.

[Leeghoofd]

I would await either the P5Q-E (same bios as P5Q Dlx ) or wait a few days mate, did you check at www.jaha.be ? Hans claims 2-3 days for them to get into stock... but I doubt for ya current setup that there would be much change... (you got such a nice combo there)

[pmp]

ASUS P5Q WS build 0201

[cstkl1]

maximus 2 formula is already in mass production
and expected to hit sometime next week.

[Eniqmah]

Wonder how this will stack up against MSI P45. Any reviews yet?

[Jupiler]

I would await either the P5Q-E (same bios as P5Q Dlx ) or wait a few days mate, did you check at www.jaha.be ? Hans claims 2-3 days for them to get into stock... but I doubt for ya current setup that there would be much change... (you got such a nice combo there)

It's not for this setup, it's for another rig with a X3350 and DFI-UT P35, which is having problems getting over 445-450FSB (well known problem).
Guess I'll have to be patient a bit more, and wait a couple more days.

[CERO]

Wonder how this will stack up against MSI P45. Any reviews yet?

Yea, http://www.overclock3d.net/reviews.p..._p45_diamond/1

[cstkl1]

also .. biostar tpower I45 will be hitting retail next week..

not sure about the US.. but malaysia supposedly next week
as long theres no custom delays..

mrsp.. kindda cheap but whether the retailer follows it is a different question...

so far this is the current selling price/retail in malaysia
USD1 = RM3.2
Asus Maximus Formula 2 = RM 1159 ( freaking big jump)
MSI P45 Diamond = RM 1000 ( DDR3)
Gigabyte P45 DQ6 = RM 890
P5Q3 Deluxe = RM 810
P5Q deluxe = RM 720
Biostar Tpower IP45 - RM 550

Gigabyte HD4850 - RM 720 ( some forumers in lyn selling RM800) available on monday.. ( no idea why gigabyte products always break nda..
happened for 8800gt,GTX,9800GTX,9800GX2,3870 and now this)

available in the next two weeks.. all the gigabyte except for the extreme and msi p45 diamond.. ( no idea whats the dealy on this)

[Chri$ch]

0610 final Bios on Asus FTP

ftp://ftp.asus.com/pub/ASUS/mb/socke...ELUXE-0610.zip

[BigJoe]

0610 final Bios on Asus FTP

ftp://ftp.asus.com/pub/ASUS/mb/socke...ELUXE-0610.zip

Thx man

[Chri$ch]

0610 has not this 2 settings



i flashed back to 0702 alpha

[Leeghoofd]

PCIiminical (what's in a name) is testing MSI P45 platinum right now...

http://www.xtremesystems.org/forums/...d.php?t=190608

[marcin255]

temperature NB to LC as well AC?
What difference? *C

[pmp]

0610 has not this 2 settings
i flashed back to 0702 alpha

Don't bother using 0610 :-)

[JIM22]

Chri$ch: what is max fsb for super pi 1mb? I reached 587, for now.

pmp: what is this clock&nb skew? I use cpu 300 and nb 200. I think that OC is beter, i must test this and see what is beter

[Chri$ch]

Chri$ch: what is max fsb for super pi 1mb? I reached 587, for now.

[Polizei]

600FSB... nicely done.

[hiwa]

ordered P5Q Deluxe
i got 661 X 9.5 validation with my commando and E8500, now need to test this one

NB@ LN2 soon as possible

[JIM22]

I don't know if p45 is beter OC then p965 c2.

hiwa post your results with new mobo here

[hiwa]

I don't know if p45 is beter OC then p965 c2.

hiwa post your results with new mobo here

i think is possible get 640,45 @ln2
sure