[PROJECT] Homewrecker V2

[Anemic]

Looks great so far! Looking forward to more pics and I really hope you can fix the SB block issue. Keep up the good work!

[evil-98]

@biftek.: regardless.. it still defeats the purpose of how the copper plate was originally designed.. and as a consumer thats the biggest fault

@chiguy: yea ive seen that build, i didnt like it. i want to keep the finishes on the front panel similar to the case which is a dust black

@fungry: there these fans very very nice but there being switched for the acryans, going from 68cfm to 58cmfm so its not that bad.

@psmawson: thats good to know still puts me back a week though, and shipping takes for ever like another 2-3 weeks

@septim: yea EK is awesome, especially eddy bit ups to eddy

@Anemic: thanks!

did some work on the front panel and moved the rom to the bottom i think this is better
this is just a mock up, im going to change up the mounts the front panel will be nicely
attached with some velcro

[disruptfam]

very nice

velcro holding the acrylic? does that work well? i may use the same technique if so..

[evil-98]

very nice

velcro holding the acrylic? does that work well? i may use the same technique if so..

ill let you know im going to try it out tonight when i get home.

[skinnee]

Where did you get those straps/mounts for the EK res?

[MINIz guy]

Those straps/mounts come with the EK res upon purchase. Petra's does stock spare ones, and I guess that other stores also stock spare ones.

[skinnee]

I have two in EK 150's in the box, and those are not even close to what I have.

Mine are these clear acrylic C compression clamps.

[MINIz guy]

Ooh, sorry about that then. I guess there is a difference between the mounts that come with the reservoir and the ones you buy separately. Sorry about that.

[bigslappy]

I ordered 2 sets today from Petra's will get them tomorrow !

[skinnee]

Ooh, sorry about that then. I guess there is a difference between the mounts that come with the reservoir and the ones you buy separately. Sorry about that.

If you have a link to the one's sold seperate, shoot me a PM plz.

[bigslappy]

If you have a link to the one's sold seperate, shoot me a PM plz.

Pm ' D

[~aoe~]

Very nice .

Subscribed.......so that I can 'steal' more ideas for my build .

[evil-98]

the res clips i used are from PPCS

@everyone: thanks for the replies

not much done but pics

edit:

also surprisingly i have space for a second rad on the bottom, which i thought i wouldnt
so maybe 3 loops :O

[Pedalmonkey]

U've probably already said this, but im too lazy to dig thru the thread, soo whered u get that rheostat?

[evil-98]

U've probably already said this, but im too lazy to dig thru the thread, soo whered u get that rheostat?

that would be the sunbeam rheobus-extreme fan controller http://www.newegg.com/Product/Produc...82E16811995016

and this was a question i had a few post back.

got some weird noises coming from my pump, and some impeller movement
need to verify weather or not both are safe or not.
i realigned the top and the noise died down but still has some slight noise

http://www.youtube.com/watch?v=7t6FzyVWEy8
http://www.youtube.com/watch?v=AaCsk2mpvFM

[fungry]

Nice work so far. I really like the rheobus PSU back plate . Looking good.

Btw, you work on a carpet surface? xD

[evil-98]

Nice work so far. I really like the rheobus PSU back plate . Looking good.

Btw, you work on a carpet surface? xD

lol thanks

carpet surface? not really its a rug and most of the work is done on the table but i sit on the floor when im installing not much space in there..
if you havent noticed the case sits on my chair so i dont even have a chair thus me sitting on the floor

[disruptfam]

looks good matey!!!

nice mod you did there

[Big_Daddy]

Looking good, question on the sunbeam. Where did you get the replacement knobs? what size? I want to leave the stock front, but replace the knobs with black ones. (it's too bright for me) It will look nice with a ring of light behind the knobs.

[septim]

spray paint knobs?

[evil-98]

Looking good, question on the sunbeam. Where did you get the replacement knobs? what size? I want to leave the stock front, but replace the knobs with black ones. (it's too bright for me) It will look nice with a ring of light behind the knobs.

as septim said, paint is one option

but i did get the knobs from radio shack

edit:

not much of an update for today, didnt have much time yesterday and i was tired
still doing some design work in my head. still thinking of how to route the loops and
waiting for eddy to fix up that top

[Boyu]

wow nice idea on mounting the fan controller on the back,i'll try later when my TJ-07 arrived

[evil-98]

wow nice idea on mounting the fan controller on the back,i'll try later when my TJ-07 arrived

thanks, its kind of a mock up for the controller right now it may or may not
stay. well see havent done much in the past weekend, too much
going on with my life and work and not enough money really im waiting
for eddy to fix up the striker II so i can continue and trying to decide were
and how to mount my rads.

heres some pics anyways

[smee]

Come on man, that looks amazing!!!!!!!!!!!!!!!!!!

But your missing something.....
http://www.petrastechshop.com/eksuuncpuwaa.html

[evil-98]

Come on man, that looks amazing!!!!!!!!!!!!!!!!!!

But your missing something.....
http://www.petrastechshop.com/eksuuncpuwaa.html

i know i know.. maybe