Foxconn BlackOPS (Retail version)

[coolice]

it is increasing the fraction...
for example gtlref is like 0.66 x vtt
so + 1 step is like 0.6605 x vtt
something like that

thanks peter
so between each step is 0.0005?

[xbrian88]

Today finally I could spend a little more to this super motherboard signed Foxconn belonging to the category Quantum Force ... as more than a week that is at home ... ready to be placed under press

As you know, our QX does not promise anything good, but the mobo has shown excellent stability ...Thank's Peter


















Validate


Validate


Validate

Some superpi to understand this X48






INFO QUI e QUI

[Nulpunt]

Nice board indeed

Last saterday we did some Ln2 testing
No big results,next time i will

Some words about the Blackops!

*Amazing bios funtions
*Works well,stabilty we working on many options in bios,i am studying!
ervery day i find something new it just get faster and faster!
*so next time where gonna hit some serieus speeds!
*mind blowing chipset cooler!

2 thumbs up!
Thnx for the support peter,

Some pics 2

[s0lid]

Spot a typo and i'll give u an a medal

Shami, shami U should fire that one who desinged those cardboard covers

[Nulpunt]

active /passive cooling must be passive/active

[s0lid]

active /passive cooling must be passive/active

ur medal sire:

[Nulpunt]

Anyways if thats all its not so bad,
i think peter the coworker already

[camouflage]

Nice - any tests with a Wolfdale?

[SF3D]

Nulpunt- Thanks for the pics

Nice - any tests with a Wolfdale?

I will start to test E8500 tonight. Chip can do 610fsb on air, so it is not limiting here. My older blackops was a lot better with tight timings and low (400- 450fsb) fsb. That was with quad of course.

[xbrian88]

you must change bios because with wolfdale you can not change multiplier ... even put many x6

[Solarfall]

I will start to test E8500 tonight. Chip can do 610fsb on air, so it is not limiting here. My older blackops was a lot better with tight timings and low (400- 450fsb) fsb. That was with quad of course.

EXCELLENT !!!!!!!...... im looking forward on seeing some dual core clocking

[LardArse]

you must change bios because with wolfdale you can not change multiplier ... even put many x6

did u try the latest bios yet?

[xbrian88]

try this afternoon

[xbrian88]

then, the g20 and p03 see the multiplier with wolfdale, but not go up ... stops in 520x6 of fsb which is a nullity than I did on the 790i, 600mhz always with that processor.

an anomaly known ... 2T imposed by bios and in windows I 1T notes, both with the cellshock that with kingston

[systemviper]

that board looks sweet, when oh when will they be available in the usa...

[T_M]

Thanks for the screenshots George, they'll help kick start me this weekend

[hipro5]

Thanks for the screenshots George, they'll help kick start me this weekend

You're welcome M8....

......and Shamino WHAT HAVE YOU DONE my friend?.....
I see here some people "fighting" for a motherboard......


EDIT: I riped the Northbridge heatsink and have cuted the heatpipes of it so to keep onto board the Mos-Fet cooling and the South cooling....On it's place I have placed a Swiftech heatsink with a DELTA 4 x 4cm 10000rpms......DON'T DO IT.....I LOST ~ 3 - 5*C of the Northbridge.....
With higher VNorth and default heatsink I was ~41*C and now I'm ~45*C......
EVERYTHING IS PURE COOPER there.....I have "scratched" the heatpipes and the North block and they are pure cooper......NO "painted" aluminum.....

[4Qman]

wow this board really is creating a stir ...

Awesome design and awesome bios. I think maybe we have a new level for the competition to reach.

Well done to everyone involved in creating such a overclocking masterpiece. Now i think ill go and look to find one to buy for myself

David

[George_o/c]

EDIT: I riped the Northbridge heatsink and have cuted the heatpipes of it so to keep onto board the Mos-Fet cooling and the South cooling....On it's place I have placed a Swiftech heatsink with a DELTA 4 x 4cm 10000rpms......DON'T DO IT.....I LOST ~ 3 - 5*C of the Northbridge.....
With higher VNorth and default heatsink I was ~41*C and now I'm ~45*C......
EVERYTHING IS PURE COOPER there.....I have "scratched" the heatpipes and the North block and they are pure cooper......NO "painted" aluminum.....

Wow ! 3 to 5 degrees, that's well, a lot !
As for the copper, that's good to hear, thanks for the heads up

[ownage]

As you all can see people, the dutch overclocking community is sooo nice!

[Catz]

Edit: i'm not even gonna respond to that

[SF3D]

Like Peter suggested, these private matters should be discussed privately. I'm asking it too.
Some cleaning could be done, if some mod have time.
Thank you!

Now, let's talk about this great pice of hardware

[camouflage]

then, the g20 and p03 see the multiplier with wolfdale, but not go up ... stops in 520x6 of fsb which is a nullity than I did on the 790i, 600mhz always with that processor.

an anomaly known ... 2T imposed by bios and in windows I 1T notes, both with the cellshock that with kingston

Huh..... - not even 520 FSB? WTF..........

Can't imagine that this great board dosn't do it............

I'm running an E8500, up to 8.5 x 542 FSB with 5:8 divider on ASUS MAXIMUS EXTREME - my RAM also runs 1000MHz on that board with 1:2 divider - and I'm very interested in buying a BLACKOPS but I need at least 500 FSB...

So is there a special trick? Anyone else with other / further tests done on BLACKOPS with a WOLFDALE?

[Catz]

Theoreticly this bord is PERFECT.

To bad theory isn't always the real matter. I'm not saying this is a bad board because it's not! It's just not as perfect as foxconn had wanted. Not as high fsb as expected and not very stable with graphic cards.

I think foxconn tried to deliver the ultimate motherboard and partially they did but there are many things that could be improved

[massman]

It's tuned for quadcore overclocking, not for wolfdale overclocking. The low FSB with wolfies is due to the chipset, not due to Foxconn quality.