It's a thermalright ultra extreme. The roomtemperature was 20 degrees.
It's a thermalright ultra extreme. The roomtemperature was 20 degrees.
System i ran:
E8400
Asus Commando
Crucial PC6400 Ballistix @ 1178 5-5-5-12
8800gt
PC power & cooling 750 W
The CPU like the voltage. I tried from 1,6 to 1,8. Over 1,8v it does not well anymore :p
I don't have any temps. I didn't chech because i thought that it just will worry me
Last edited by Tharshan; 05-02-2008 at 01:07 PM.
Nice... Though your ram or something needs tightened. Ive seen sub 10 second runs with the same chip @ 4.5Ghz.
Yeah, at that voltage, dont plan on keeping it for too long.
1.8V for 45nm nice one, I've seen many 45nm dieing with vcore lower than this. Respect for courage
yes i know what you mean better not looking at temps eh! , what would the cpu do with the 9x multiplier, i have had about 4 of the new e8000 series cpus and they all run different some only need low volts but run hot and some need more volts and run cool , the e8500 i have tops out at 4750 on water with about 1.72 volts thenm it gets too hot, on single stage cooling which i hooked up just for a bench session i rammed 1.85 volts through it and it did 5140 , and running same chip now at 1.35 volts at 4038mhz 24/7
Wow havent looked at temps? GG
Nice OC though.
Intel Q6600 (Stock for now)
Scythe Infinity
XFX 680i LT
OCZ 2 x 2GB Platinum DDR2 800
EVGA 8800GTS 640MB
Ultra Aluminus
Mushkin 650watt SLI
Seagate 500gb
Seagate 250gb
DVD Rom/Burner
Wow 1,8 volt on air is not good
max 1,60 - 1,65 only for bench
My Computer: CPU Intel i7 920@4 ghz 1.35 volt. MAINBOARD Asus P6t dlx. RAM CSX 2000. VIDEOCARD EVGA GTX 295 . H.DISK 2 x WD VelociRaptor 74 GB @ Win XP SP3 . POWER Zalmann 1000 Watt. CASE LIAN-Li A70 . INTEGRATED WATERCOOLING CPU Couplex + Rad V3 + MP655 + Vaschetta dual 5,25 . SK VIDEO EK + Rad V2 + MP655 + vaschetta 5,25
Yes I would say that 1.8v is too much for air, but I would also like to say that 1.8v is too much for 4.7Ghz as most people only need 1.6v or less for that speed, some people with 1.8v can get to 5.4+Ghz with the E8400.
Last edited by DFI pit bull; 05-02-2008 at 10:05 PM.
xtreme
dont kill your cpu man
Yup...unless you're ready for an upgrade, keep that voltage a bit lower...nice result for air cooling though!
I will test my chip what it does with 1,65v tonight
that is just stupid...
24/7 Setup: Asus maximus x38 / E8500 E0 (500x8) Dtek Fuzion / Ballistix old rev 4-4-4-4 @ 1000MHz / 2900XT Ek fullcover cf / Silverstone TJ-07
Bench: Commando / Tpower i45 / P5K / E8500 E0 @ http://valid.x86-secret.com/show_oc.php?id=433935 / modded mach2 r507 / Old rev ballistix /
ok you need to look around here and ask yourself. im at xtremesystems witch i would think there are plenty of xtreme benchs and test etc. most people think this is stupid unless your a xtreme overclocker and take risks. the people who are xtreme think its cool but people like you think its stupid. maybe you should goto powderpuffoverclocking.com and post there. and fix you sig cuz ive never seen a BOLT modded motherboard. would you care to show us your BOLT mod please.
and tharshan way to be man this is xtreme systems and i congratulate you in having the balls to put that much vcore through that chip keep it up man get some cold on the thing
cpu: 2600k@ 4.5ghz
mobo: asus p8p67 deluxe
ram: gskill ripjaw x F3-10666CL7D-8GBXH
gfx: gigabyte gtx460
psu:corsair 520hx
case: antec 900
cpu cooling: Prolimatech Megahalems Rev.B
500mhz cas 3 club: http://valid.x86-secret.com/show_oc.php?id=235630
p4 511 2.8ghz@ 5004mhz :http://valid.x86-secret.com/show_oc.php?id=124434
p4 541 3.2ghz@ 4909mhz :http://valid.x86-secret.com/show_oc.php?id=157470
wow I didnt even use that much voltage at -80c :p
Heatware -> http://heatware.com/eval.php?id=51939
Ebay -> http://myworld.ebay.com/onewhoisplug
Feel Free to hop in my ventrio server and chat with us
Vent6.gameservers.com:4498
Most of E84 i tested reached 4.7GHz 1m stable with about 1.5-1.55core with air. My best E82 reached 4.65Ghz 1m with 1.52Vcore on air. 1.8Vcore adds more heat than stability at that frequency.
Ok. I don't really understand you or your race, but if U wanna get dirty. Talking like you know something. Get the damn info about my motherboard before you open your mouth and release your death breath over me. IF you wanted to see my boltmodd then i will show U, im afraid I don't need beacause there is plenty of people that already done the mod, you know where the search bottom is? you were only a click from it!. http://www.xtremesystems.org/forums/...&postcount=751 was it so hard it took me about 2 min. If you don't call it a boltmodd, and you want to say "heatpipe mod" then it's fine with me, im gonna change my sign again if there is more people that wan't to call it a heatpipe mod.
Anymore more questions?
EDIT: I'm not going to watch in this thread anymore and im not coming back to xtremesystems.org, now when i know there is people like natedog420 on this site too, natedog420 if you wanna talk more PM me
Last edited by begrip; 05-03-2008 at 10:18 AM.
24/7 Setup: Asus maximus x38 / E8500 E0 (500x8) Dtek Fuzion / Ballistix old rev 4-4-4-4 @ 1000MHz / 2900XT Ek fullcover cf / Silverstone TJ-07
Bench: Commando / Tpower i45 / P5K / E8500 E0 @ http://valid.x86-secret.com/show_oc.php?id=433935 / modded mach2 r507 / Old rev ballistix /
just extreme ....
how much temp under super pi load ? 120 c???
2600K working in 4.8 GHZ so far
2600k @(4600 Ghz) 1.42v : (under water)
Asus B2 mobo
4 GiG DDR 2400 MHZ
GTX 570 @ 1.063v ( 910/1820/2001 Mhz) .(under water).
1020 W PSU
Hobie's : Overclocking .... Overclocking .... Overclocking
I don't really know. But bios showed 67,5c when i booted.
1.8V for 4700mhz??
couldn`t you give less?
[SIGPIC][/SIGPIC]
Bookmarks