anyone: how about voltages with the 05/05 bios?
gratz @ final8ty
1. ASUS Sabertooth 990fx | FX 8320 || 2. DFI DK 790FXB-M3H5 | X4 810
8GB Samsung 30nm DDR3-2000 9-10-10-28 || 4GB PSC DDR3-1333 6-7-6-21
Corsair TX750W | Sapphire 6970 2GB || BeQuiet PurePower 450w | HD 4850
EK Supreme | AC aquagratix | Laing Pro | MoRa 2 || Aircooled
Hey, Oli
Tony has taken a DMM Reading of the Vdimm and that has improved drastically and is very close to vdimm set in Bios So making improvements with that finally. I don't have my rig set up on the bench and have asked a couple of times if anyone will be as kind as to get Vcore and NB Voltages with DMM and see how far off that is compared to what is set in Bios but no one has volunteered or people just don't have their board on the bench one or the other.
Do you have you're board on the Bench?
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
Mmh.. think i'll flash 05/05 and test..
mmh at stock volts (1.4v) dmm is still reading 1.449v..
cpuz reading: 1.424v
Last edited by Oese; 05-14-2008 at 07:40 AM.
1. ASUS Sabertooth 990fx | FX 8320 || 2. DFI DK 790FXB-M3H5 | X4 810
8GB Samsung 30nm DDR3-2000 9-10-10-28 || 4GB PSC DDR3-1333 6-7-6-21
Corsair TX750W | Sapphire 6970 2GB || BeQuiet PurePower 450w | HD 4850
EK Supreme | AC aquagratix | Laing Pro | MoRa 2 || Aircooled
Oli , you on 5/5/2008 with that reading?
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
yepp..
and really, my ram is no longer stable at stock vdimm at those settings, blend priming at stock vcore/2.0v vdimm right now..
Last edited by Oese; 05-14-2008 at 08:31 AM.
1. ASUS Sabertooth 990fx | FX 8320 || 2. DFI DK 790FXB-M3H5 | X4 810
8GB Samsung 30nm DDR3-2000 9-10-10-28 || 4GB PSC DDR3-1333 6-7-6-21
Corsair TX750W | Sapphire 6970 2GB || BeQuiet PurePower 450w | HD 4850
EK Supreme | AC aquagratix | Laing Pro | MoRa 2 || Aircooled
Two weeks ago I finaly bought a 9850 for my DFI 790, that has been laying in it´s box for abought a month know. Installd win Xp 32bit and flashed to 5/5-08 bios. For me this new B3 is much more stable then my old 9500 and my 9600BE. Been running 2800mhz with brother´s bios template exept v-core wich is 1,28v. Also left the third setting from above starting with vcore @ Auto. BUT, If i leave my rig on over night, it will not come back to life again, will try more vcore... But more voltage heats up my PWM and NB like crazy, PWM was hitting 70C+ before I palced an stock AMD 70mm fan over it, but to make it fitt i hade to remove my Ultra-X and use AMD´s new heatpipe cooler... So now my CPU loads 70C but my PWM stays cool... With my Ultra-X my Cpu loaded 52C... Anyone else have trobble with heat, and how much heat can an Br take 24/7? 55-60c safe?
OCZ VX2 @ 533mhz 1,9v 5-5-5-18
DFI UT 790FX 5/5-08
HD 3870
Corsair HX 520w
Brother Esau, I have a fluke and can problably do some messuring if it´s not to hard, will look into it!
Last edited by BadNizze; 05-14-2008 at 11:31 AM.
AMD
955BE, 720BE & Athlon II 250
Gigabyte 790FXT-UD5P F5 Bios
Crucial Value 2*1Gb D9 JNM
XFX 4770
Seventeam 650w
be, seems like with arctic ceramique wlp and 5/5 bios/2,0v vdimm that chip is stable on stock vcore.. but i'll see with rising temps here in summer..
1. ASUS Sabertooth 990fx | FX 8320 || 2. DFI DK 790FXB-M3H5 | X4 810
8GB Samsung 30nm DDR3-2000 9-10-10-28 || 4GB PSC DDR3-1333 6-7-6-21
Corsair TX750W | Sapphire 6970 2GB || BeQuiet PurePower 450w | HD 4850
EK Supreme | AC aquagratix | Laing Pro | MoRa 2 || Aircooled
I dont understand what the CPU Feature that has snown up in the bois is about?
how does the Ht clock? all ive really seen in here is just raising the multi
Biostar Tpower P45
e2180
2gb G. Skill D9GMH
HD4870
enermax galaxy 1kw
@ final8ty: which one? did not see something new...
1. ASUS Sabertooth 990fx | FX 8320 || 2. DFI DK 790FXB-M3H5 | X4 810
8GB Samsung 30nm DDR3-2000 9-10-10-28 || 4GB PSC DDR3-1333 6-7-6-21
Corsair TX750W | Sapphire 6970 2GB || BeQuiet PurePower 450w | HD 4850
EK Supreme | AC aquagratix | Laing Pro | MoRa 2 || Aircooled
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
and what does it mean??
1. ASUS Sabertooth 990fx | FX 8320 || 2. DFI DK 790FXB-M3H5 | X4 810
8GB Samsung 30nm DDR3-2000 9-10-10-28 || 4GB PSC DDR3-1333 6-7-6-21
Corsair TX750W | Sapphire 6970 2GB || BeQuiet PurePower 450w | HD 4850
EK Supreme | AC aquagratix | Laing Pro | MoRa 2 || Aircooled
I said Phenom Oveclocking. Dual Core screams on this board and I had over 360 HT going on with my 6400+BE
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
Did you try my settings on the First page?
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
1. ASUS Sabertooth 990fx | FX 8320 || 2. DFI DK 790FXB-M3H5 | X4 810
8GB Samsung 30nm DDR3-2000 9-10-10-28 || 4GB PSC DDR3-1333 6-7-6-21
Corsair TX750W | Sapphire 6970 2GB || BeQuiet PurePower 450w | HD 4850
EK Supreme | AC aquagratix | Laing Pro | MoRa 2 || Aircooled
*NEW* 5/5/2008 Official Bios for DFI LanParty UT 790FX-M2R>>>>>http://www.dfi.com.tw/Support/Downlo...FLAG=A&SITE=US
Last edited by Brother Esau; 05-18-2008 at 10:40 PM.
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
Is that off the last beta which I think is 5-5. I have that beta and want to know if I should flash to official? It seems stable as long as I don't OC.
Update;
I put my W5600X2 in the 780M2R to take advantage of running cooler until the 45nms but I encountered hard power off crashes when loaded. I did'nt feel like ing around with it so I put the phenom back in. Problem went away.
What I did observe is that the vcore was at 1.05 when I first booted which meant that CnQ was working. Once I F7ed it and rebooted that feature went away.
How do you get CnQ to work on a Phenom when not OCed?
Last edited by AlabamaCajun; 05-19-2008 at 06:26 AM.
Main Win64; Phen940BE, Sunbeam Cooled, DFI LP790FX-M2R, 2x2G Corsair, R3850XT
Production XP; Athlon 6KBE, GByte POS mobo, 2x2G Gskill 800, R3750XT.
Vista 64 Test; GP9500, ECS740M, 2x2G GSkill, IGP.
Server; 4 X 8347 Opterons, 8x1G Kingston.
XP Home Test; A5000BE X2, ECS RS485M, 2x1G Wintec, IGP.
S&Gs Test; A5000BE X2, ECS A770M-A, A5800 X2, ECS KA3-MVP-580X, 2x1G ?
Bookmarks