Phenom stepping/batch overclocking database

[LIKMARK]

We need a new database

To be added on the chart you'll have to post the following info:

Model:
Batch:
Frequency:
Vcore:
Motherboard/chipset:
Cpuid validation url:
Cooling: Air/h2o/xtreme

Optional:
SS of X hours Prime 95 with cpu-z
Suicide screen (just for fun)

http://valid.x86-secret.com/show_oc.php?id=333344

[Oldguy932]

I need to see if I even have screens of my B2's anymore...I'll edit back later. Good idea to start this thread.



There's the highest on my 9600 with the vapo, I think I'll put it back in the crosshair just so I can get that screenie of +3ghz stable for everyone.

Phenom 9600 CAAWB 0745 MPMW @ 2956mhz 1.3v set 1.28 actual.
Asus M3A32-MVP Deluxe, 0801 Bios
8 hours small fft's stable
Sorry I don't have the cpuz verification link, I'll work on it though.

[Brother Esau]

I need to see if I even have screens of my B2's anymore...I'll edit back later. Good idea to start this thread.



There's the highest on my 9600 with the vapo, I think I'll put it back in the crosshair just so I can get that screenie of +3ghz stable for everyone.

Phenom 9600 CAAWB 0745 MPMW @ 2956mhz 1.3v set 1.28 actual.
Asus M3A32-MVP Deluxe, 0801 Bios
8 hours small fft's stable
Sorry I don't have the cpuz verification link, I'll work on it though.

Please tell me the Phenom ainy 39c under Phase

[biohead]

Please tell me the Phenom ainy 39c under Phase

Temp 1 says -1°C, temp 2 is probably chipset?

[Oldguy932]

Yeah, temp 1 is cpu, temp 2 is chipset, temp 3 is random. The only problem with clocking it was that it hated extra voltage over 1.325 on air and 1.3 on the vapo. If I could've used more voltage it would've clocked so much higher...

[cygnus_x_1]

holding my spot. popped my DS5 the other night and waiting for RMA.

Model: 9900 ES
Batch: AAAZB AA 0744EPBW
Speed: 2.6 MHz
Vcore: 1.3
Motherboard/chipset: Gigabyte MA790FX-DS5
Cpuid validation url:
Cooling: Air (OCZ Vendetta)

[msimax]

just bumping cause i see alot of you buying x4s

[SocketMan]

Model:9600BE
Batch:CAAWB AA 0748CPFW
Speed:2300..........................2500cpu/2400NB=24/7--Stock Volts
Vcore:1.250
Motherboard/chipset:Asus M3A-AMD770
Cpuid validation url:http://valid.x86-secret.com/show_oc.php?id=327287
Cooling: Air
Optional:
SS of X hours Prime 95 with cpu-z
Suicide screen (just for fun)

[FatAlbert]

hey

guys, maybe you know what is the best time in spi 1m with Phenom ?

[Oldguy932]

I think wPrime1024m or cinebench multithread would be better. It needs to be something that takes advantage of the entire computer minus the graphics card.

[Psychlone]

Model: 9850 BE (B3)
Batch: JAAFB AA 0810 BPAW
Speed: 2500.24MHz
Vcore: 1.28V
Motherboard/chipset: ASUS M3A32-MVP Deluxe/WiFi-AP / AMD 790FX & SB600 (BIOS 1002)
Cpuid validation url: http://valid.x86-secret.com/show_oc.php?id=346599
Cooling: Zalman CNPS9700NT (41*C avg.)

Optional:
24 hours Orthos Priority10 stable (burn-in)

I'll be overclocking to my system's MAX soon, so more to come...

Psychlone

[TripleZero]

Model: 9850 BE
Batch: JAAFB AA 0810 BPAW
Speed: 3103MHz
Vcore: 1.32V
Motherboard/chipset: DFI LP DK 790FX-M2RS 790FX/SB600
Cpuid validation url: http://valid.x86-secret.com/show_oc.php?id=346638
Cooling: Air - Zalman CNPS9700NT

[Psychlone]

Overclocked and tested for the last 7 hours:

Model: 9850 BE (B3)
Batch: JAAFB AA 0810 BPAW
Speed: 2902.69MHz
Vcore: 1.28V (still @ stock voltage!)
Motherboard/chipset: ASUS M3A32-MVP Deluxe/WiFi-AP / AMD 790FX & SB600 (BIOS 1002)
Cpuid validation url: NEW VALIDATION http://valid.x86-secret.com/show_oc.php?id=346599
Cooling: Zalman CNPS9700NT (41*C avg.)

Optional:
6 hours Orthos Stressprime priority10

Still working on my max...more to come...

Psychlone



After looking at the CPU temp, looks like I best be reseating that new Zalman with a better layer of AS5... (isn't 50*C high for the Phenoms, or am I still living in the K8 era??)

[LIKMARK]

Ok list updated, new features will be added when I can find time for it , any more wishes for info on the list

[triple_A]

Good to see max clock on phenom increase

[SkullCracka]

my "Turantulla".

Model: 9850x4
Batch: jaafb aa 0810gpbw
Frequency:3ghz
Vcore:1.45v
Motherboard/chipset:asus m3a32-mvp deluxe wifi
Cpuid validation url: http://valid.x86-secret.com/show_oc.php?id=373761
Cooling: Air - Zerotherm Nirvana 120


vista64

http://i278.photobucket.com/albums/k...ate6-10-08.jpg


XPPro

http://i278.photobucket.com/albums/k...31ghzXpPro.jpg








Specs:
asus m3a32 - 9850x4 - Xfire3870's - eliteProSB - dual raptorX's/Raid0 - Crucial Balistix Tracers 1066/4x1gb - blah blah blah

[I_J_A]

Model: 9750
Batch: JAAFB AA 0810 BPMW
Speed: 3.00Ghz
Vcore: 1.3V
Motherboard/chipset: Asus M3A / AMD 770/SB600
Cpuid validation url:http://valid.x86-secret.com/show_oc.php?id=366768
Cooling: Air


Everything is set to 'auto' except the FSB speed.

Got mine 3 days ago, it needed a new PSU to sustain this overclock (550W dual-rail Xilence). Temps range from 38 idle to over 70 full load (I'm using Arctic Silver paste and a Zalman Copper 7500 HS/Fan). It
did give an error in Prime95 on blend, but since turning down RAM timings didn't happen again. Passes 8K FFT (10 runs). Perfectly stable in Windows.

All-in-all I'm very happy with this chip! Just need to keep a careful eye on the temps in the long run.

[demonkevy666]

Model: 9750
Batch: JAAFB AA 0810 BPMW
Speed: 3.00Ghz
Vcore: 1.3V
Motherboard/chipset: Asus M3A / AMD 770/SB600
Cpuid validation url:http://valid.x86-secret.com/show_oc.php?id=366768
Cooling: Air


Everything is set to 'auto' except the FSB speed.

Got mine 3 days ago, it needed a new PSU to sustain this overclock (550W dual-rail Xilence). Temps range from 38 idle to over 70 full load (I'm using Arctic Silver paste and a Zalman Copper 7500 HS/Fan). It
did give an error in Prime95 on blend, but since turning down RAM timings didn't happen again. Passes 8K FFT (10 runs). Perfectly stable in Windows.

All-in-all I'm very happy with this chip! Just need to keep a careful eye on the temps in the long run.

I got a 9550 that I can't seem to clock anywhere
as you can read I'm vista 64 bit.

[KTE]

Ah ok, I've just been too busy. I'll add the ones I tested soon just for information for the passersby since there won't be much oc data on them.

But... I'd love to know far more details which could help end users and the stability thing is really too big'an issue to post on.

Don't know what to say about the ones getting C1 error though

[Extelleron]

My Phenom 9500 is CAAZB AA 0743APAW.

Have to see what it is like when I get my mobo; ordered an Abit AX78 today.

[Particle]

Suicide: 3.0GHz http://valid.x86-secret.com/show_oc.php?id=348250

Dunno why it never validates at 3.0. Some times it won't even crash for an hour, it's not like it is uber-unstable...just "very".

Stable: 2.8GHz at unknown voltage so far

9850: JAAFB AA 0810GPBW on air.

[KTE]

Suicide: 3.0GHz http://valid.x86-secret.com/show_oc.php?id=348250

Dunno why it never validates at 3.0.

Because you used AOD to get it?

[Oldguy932]

Well, I'm currently running the gimps part of prime95 at 258x11.5 on the 9600. Still kinda wish I had gotten it as my black edition and not the one I actually did.

[Particle]

Because you used AOD to get it?

What difference does that make?

[KTE]

What difference does that make?

If you used it on the 9850 then its known to make validation fail.

If you scroll down to where I put my CPUZ Validation you will see as promised I added a Bios Template with my DFI Bios Settings and CPU Voltage is set to 1.25Vcore which is actually 1.23-1.24v (Real)

The DFI is undervolting? Are you sure about that?