What was the core voltage set at?
1.52 see first post
AMD Athlon 64 x2 6000+ AM2 CCB8F 0740 FPMW
MSI K9A2 Platinum v1.2
4 x 1GB Corsair XMS2 (rev 5.1 and rev 5.2)
Zalman CNPS9700LED
PowerColor ATi HD 3870 512MB DDR4 256bit PCIe 2.0
Corsair TX750 Watts (12v @ 60A on a single rail)
80 GB WD SATA I (primary)
250 GB WD SATA II (backup)
Air apparently 3.2 is possible.
http://www.xtremesystems.org/forums/...=1#post2891009
I have a feeling my DFI board has an issue, it is an early example so I will have to ask for another to resume testing.
Yes I was at near 2.7GHZ NB but it was only 80% stable
Last edited by Tony; 04-03-2008 at 11:46 AM.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
OC +3K and NB speed @ 26xx oh yes can't wait to see this new revision in my hands.
you mean batch number?
AMD Athlon 64 x2 6000+ AM2 CCB8F 0740 FPMW
MSI K9A2 Platinum v1.2
4 x 1GB Corsair XMS2 (rev 5.1 and rev 5.2)
Zalman CNPS9700LED
PowerColor ATi HD 3870 512MB DDR4 256bit PCIe 2.0
Corsair TX750 Watts (12v @ 60A on a single rail)
80 GB WD SATA I (primary)
250 GB WD SATA II (backup)
Coldbug?
Computer:
Case: Corsair 750D Airflow Edition
Mobo: Gigabyte Aorus X570 Ultra
RAM: Crucial Ballistix Sport LT 2x16gb @ stock
CPU: AMD Ryzen 5900x
Graphics: Evga GTX 1080 FTW, Coil Whine edition
PSU: Corsair RMi 650w
Cooling: Please don't remind me. Corsair H115i w/Arctic P14 PWM fans.
HDD: 970 Pro, 860 Evo, WD 1tb 3 platter drive (12 years old?!), etc.
for every person who buys a phenom thanks to tony, u must send him 1$.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
Some wanted Idle and load temps, on the GBT DQ6 3.2GHZ is feeling really stable, ran an everest stability test while looking at AOD for temps.
INFO on Clocks first:
Run up on load,this was a quick test so add 2C for 20mins load. Water temp is 19C throughout.
Idle after a few mins settled here:
Remember I have 12gallons in my loop, 29ft of head pressure on the loop and 3 water blocks in the loop,
It takes 8 hrs with 3 quads at 4GHZ+ to raise my water temp in the loop 6C.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
very nice, I'm curious about the CPU score on 3dmark, and general performance at 3.2ghz... I didn't tought I would see phenoms at 3.2ghz so soon...
Awesomesauce! So you're on another board now, right? Have you tested any 250> HTT clocks?
Ryzen 9 3900X w/ NH-U14s on MSI X570 Unify
32 GB Patriot Viper Steel 3733 CL14 (1.51v)
RX 5700 XT w/ 2x 120mm fan mod (2 GHz)
Tons of NVMe & SATA SSDs
LG 27GL850 + Asus MG279Q
Meshify C white
$248 @ NCIXUS
http://www.ncixus.com/products/29153/HD985ZXAGHBOX/AMD/
pick yours up
they are available in the states.
Desktop
AMD Phenom II X2 550 (Quad Unlocked @ 3.4Ghz / 2200Mhz NB)
Gigabyte GA-MA790X-UD4P (F9 Bios)
8GB (4x2GB) @ DDR2-800
ASUS GeForce GTX 560 Ti DirectCUII (920/1840/2200)
Corsair Force GT 120GB
LSI MegaRAID 8408E (3x750 R5)
Windows 7 x64 SP1
Cisco E2000 with DD-WRT kernel 2.6
Awesome results Tony . I'm hoping more chips are capable of OCing like this
Seems we made our greatest error when we named it at the start
for though we called it "Human Nature" - it was cancer of the heart
CPU: AMD X3 720BE@ 3,4Ghz
Cooler: Xigmatek S1283(Terrible mounting system for AM2/3)
Motherboard: Gigabyte 790FXT-UD5P(F4) RAM: 2x 2GB OCZ DDR3 1600Mhz Gold 8-8-8-24
GPU:HD5850 1GB
PSU: Seasonic M12D 750W Case: Coolermaster HAF932(aka Dusty )
As quoted by LowRun......"So, we are one week past AMD's worst case scenario for BD's availability but they don't feel like communicating about the delay, I suppose AMD must be removed from the reliable sources list for AMD's products launch dates"
saw that after i posted, stupid me
Desktop
AMD Phenom II X2 550 (Quad Unlocked @ 3.4Ghz / 2200Mhz NB)
Gigabyte GA-MA790X-UD4P (F9 Bios)
8GB (4x2GB) @ DDR2-800
ASUS GeForce GTX 560 Ti DirectCUII (920/1840/2200)
Corsair Force GT 120GB
LSI MegaRAID 8408E (3x750 R5)
Windows 7 x64 SP1
Cisco E2000 with DD-WRT kernel 2.6
I'll be damned...
Tho can we have a cpu-z validation for 3.5GHz godness please
This is getting me so excited. I preordered mine from compsource.com. I emailed them and asked them the ETA and they said not until May 2nd 2008. I dont know if anyone else has heard the same? If not, im canceling the order and getting it somewhere else.
Windows 7 RTM
CPU: AMD Phenom II 945 @ 3.5ghz
MB: Gigabyte MA790FX (GA-MA790FX-UD5P)
Vid:2x Xfx Radeon 4890 - Drivers ATI 9.8
Mem: G.Skill 2x2gb DDR2-1000 5-5-5-15(F2-8000CL5D-4GBPQ)
PSU: Corsair 620w
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
i got goosebumps all over when i saw the thread title
is this an engineering sample or the regular random pick from the stores?
edit: argh its in first post. nice!
Last edited by BertM; 04-03-2008 at 01:22 PM.
amd 940 @ 3.5ghz stock voltage or 3.7ghz 1,425v home made cpu block 3616 mhz and 2210mhz nb stable
gigabyte ga-ma790fx-dq6
sapphire hd4870 1gb @ 160-200 in idle , 750-950 load, with 2 rivatuner power profiles shortcuts.
2x 2GB OCZ Blade 8500 ddr2 1066 @ 1.85 volt
seagate barracuda 7200-11 1x500gb & 1x640gb (rip 1 500gb barracuda )
seagate barracuda 7200-12 1TB , very nice hd, 5 degree colder then the 640gb
windows xp 32
lian li pc-a70b
cooler master real power 850watt
As quoted by LowRun......"So, we are one week past AMD's worst case scenario for BD's availability but they don't feel like communicating about the delay, I suppose AMD must be removed from the reliable sources list for AMD's products launch dates"
I guess thats the big question of this thread. What does FSB//HTT overclocking look like?
Bookmarks