MMM
Page 1 of 2 12 LastLast
Results 1 to 25 of 29

Thread: Foxconn Blackops. 9800GX2 (28.9K 06)

  1. #1
    Nice Hardware!!!
    Join Date
    Jan 2006
    Location
    Finland/Tampere
    Posts
    1,852

    Foxconn Blackops. 9800GX2 (28.9K 06)

    I see so many 9800GX2 threads here

    Well these are my first test. I got this card yesterday, so I haven't got much time to play with it.

    Messy setup:


    This wasn't good bench day at all. Everything that can go wrong, did go wrong All parts are still working, so I quess everything is ok after all.
    I could be the happy 29K result owner, but 06 test always crashed at some point. I tested it about 100 times today

    And last thing is the driver. I did tests with 174.74 and 01 was bad.

    Ok.. the screens now.

    06: (28915)


    05: (36765)


    03: (86225)


    01: (107420)


    AM3: (335.610)


    More to come when I get everything work like they should. GPUs could also be more cold than with stock air.
    You are as good as your samples are!

  2. #2
    Xtreme Member
    Join Date
    Mar 2007
    Location
    Italy
    Posts
    478
    Really nice start SF3D, i've some problem with 06 and 01, the score is low

    What brand is your 9800GX2???
    Last edited by Zannema; 03-28-2008 at 06:30 PM.
    Extreme Overclocker


  3. #3
    Xtreme Legend
    Join Date
    Oct 2005
    Location
    Austria
    Posts
    865
    nice
    keep pushing bro

  4. #4
    Xtreme Addict
    Join Date
    Nov 2003
    Location
    Oslo, Norway
    Posts
    1,219
    nice scores my friend!! good cpu clocks there to!

  5. #5
    Xtreme Enthusiast
    Join Date
    Jul 2007
    Posts
    674
    5.6Ghz CPU very nice,couldn't you CPU speed be faster on 01?Does it still have a few more megahertz?Congrat's on the scores and better results next time

  6. #6
    Xtreme Enthusiast
    Join Date
    Jan 2007
    Location
    Portugal
    Posts
    521
    As he already said he hadnt got much time to play yet, Im sure we will see higher numbers soon

  7. #7
    Xtreme Guru
    Join Date
    Jun 2006
    Location
    Finland, joensuu
    Posts
    3,530
    kwel numbers petri, keep pushing it ...damn i wanna foxconn blackops board too lol
    Last edited by Solarfall; 03-29-2008 at 12:57 AM.
    Evga X58 sli under cascade
    http://www.xtremesystems.org/forums/...d.php?t=219788
    Evga X58 Sli ultimate overclocking/ overview/ discussion thread
    http://www.xtremesystems.org/forums/...d.php?t=221082


    proud owner of E8600 Q822A435

  8. #8
    Xtreme Enthusiast
    Join Date
    Aug 2005
    Location
    Romania, Transylvania crazyp.ro
    Posts
    649
    Nice scores man .

    Look at my 2k1




    Next time try 173.67 its faster , as you can see in my CH .
    Last edited by M3kk; 03-29-2008 at 05:18 AM.
    -------------------------------------------------------------------------------------------------------------------------------


    3Dmark2006 Score Calculator
    ---------------------------

    "Frequency Unlimit -Enabled'' by DFI

  9. #9
    Nice Hardware!!!
    Join Date
    Jan 2006
    Location
    Finland/Tampere
    Posts
    1,852
    Thanks guys!

    Yes I had a lot problems yesterday. For some reason board didn't work like it should. Cpu can do 3DM06 test at 5.75GH (13x442MHz). Score would have been great with that speed.

    This morning I did some more benching, but couldn't get any better results.

    Little improvement in 01:


    E: I didn't remember to open details window in that screenshot. Look at that car high Here is orb link: http://service.futuremark.com/compare?2k1=9356215
    Last edited by SF3D; 03-29-2008 at 03:28 AM.
    You are as good as your samples are!

  10. #10
    Xtreme X.I.P.
    Join Date
    May 2004
    Location
    Hammel/Denmark
    Posts
    2,083
    Very nice The reason your 01 is low, is that you MUST use the 173.67 driver, og CH will be low by 50-60fps. use the that driver, and it will fly
    The whole world's hip and thats not cool !

    Rip Van Hippy

    Doesn't expecting the unexpected make the unexpected the expected ?

    Light travels faster than sound. This is why some people appear bright until you hear them speak


    -------------------------

  11. #11
    Nice Hardware!!!
    Join Date
    Jan 2006
    Location
    Finland/Tampere
    Posts
    1,852
    Damn. I didn't have enough time to test different drivers. Those drivers that I did use are good for 06 though.
    You are as good as your samples are!

  12. #12
    ODOC
    Join Date
    Aug 2006
    Location
    Copenhagen - Denmark
    Posts
    2,193
    Not bad at all...

    Good to see your playing with gx2...

    Keep pushing it.

  13. #13
    Xtreme Member
    Join Date
    Mar 2007
    Location
    Italy
    Posts
    478
    Quote Originally Posted by SF3D View Post
    Damn. I didn't have enough time to test different drivers. Those drivers that I did use are good for 06 though.
    I don't understand because my nature is badder of your
    Extreme Overclocker


  14. #14
    Xtreme Member
    Join Date
    Jun 2006
    Posts
    342
    Great score Emanuele
    My Computer: CPU Intel i7 920@4 ghz 1.35 volt. MAINBOARD Asus P6t dlx. RAM CSX 2000. VIDEOCARD EVGA GTX 295 . H.DISK 2 x WD VelociRaptor 74 GB @ Win XP SP3 . POWER Zalmann 1000 Watt. CASE LIAN-Li A70 . INTEGRATED WATERCOOLING CPU Couplex + Rad V3 + MP655 + Vaschetta dual 5,25 . SK VIDEO EK + Rad V2 + MP655 + vaschetta 5,25

  15. #15
    Nice Hardware!!!
    Join Date
    Jan 2006
    Location
    Finland/Tampere
    Posts
    1,852
    Quote Originally Posted by Zannema View Post
    I don't understand because my nature is badder of your
    It must be the drivers or your card is not stable. I think it is the driver.

    Quote Originally Posted by lukas69 View Post
    Great score Emanuele
    Wrong thread, but Emanueles score is great
    You are as good as your samples are!

  16. #16
    Very nice SF3D...which driver was the best for 2006 for you?

  17. #17
    Nice Hardware!!!
    Join Date
    Jan 2006
    Location
    Finland/Tampere
    Posts
    1,852
    Quote Originally Posted by k|ngp|n View Post
    Very nice SF3D...which driver was the best for 2006 for you?
    Thanks! I think the latest is the best for 06.

    By the way. Did you suffer any black screens during your bench session? Did you mod the PCI-E chip voltage?

    I had some black screen problems if voltage were over 1.35V or the reason was clock speed. (over 830MHz and PCI-E chip couldn't handle it?)
    You are as good as your samples are!

  18. #18
    Xtreme X.I.P.
    Join Date
    May 2004
    Location
    Hammel/Denmark
    Posts
    2,083
    Quote Originally Posted by SF3D View Post
    Thanks! I think the latest is the best for 06.

    By the way. Did you suffer any black screens during your bench session? Did you mod the PCI-E chip voltage?

    I had some black screen problems if voltage were over 1.35V or the reason was clock speed. (over 830MHz and PCI-E chip couldn't handle it?)
    Its seems to have some kind of OVP close to 1.4v. I know Vince have seen that, and myself also .....some cards dont seem to have it though. maybe we should try a different BIOS?
    Last edited by SIOUX; 03-29-2008 at 08:44 AM.
    The whole world's hip and thats not cool !

    Rip Van Hippy

    Doesn't expecting the unexpected make the unexpected the expected ?

    Light travels faster than sound. This is why some people appear bright until you hear them speak


    -------------------------

  19. #19
    Nice Hardware!!!
    Join Date
    Jan 2006
    Location
    Finland/Tampere
    Posts
    1,852
    Quote Originally Posted by SIOUX View Post
    Its seems to have some kind of OVP close to 1.4v. I know Vince have seen that, and myself also .....some cards dont seem to have it though. maybe we should try a different BIOS?
    I have to start looking what is causing this.

    Hardest tests are 3DM06 GT2 and 03 GT 3/4. Same tests are the hardest for 3870X2 too. That's the reason why I thought about the PCI-E chip. Too much traffic through one chip.. I hope that's not the reason.
    You are as good as your samples are!

  20. #20
    Xtreme Member
    Join Date
    Oct 2005
    Location
    127.0.0.1
    Posts
    373
    Quote Originally Posted by SF3D View Post
    ...Too much traffic through one chip.. I hope that's not the reason.
    Yes ... i've got the same problem...PCI-e can't handle that much of а traffic , i got a lot of black screens and hang-ups during my test with PCI-e over 115-120 mhz
    Never happen before , i was thinking it's driver related (174.74), but it occur even with the official ones ...
    Though i manage to break 10k SM2 and near 11k SM3 with fully stock and unmoded GX2 from Gigabyte....
    21602
    Last edited by DStealth; 03-29-2008 at 01:47 PM.
    P67B3 SB D2@5.1G_1.47v :bow: SA PSC GF110 SSDS SPI-6.79 06-37580 Vantage-P36245
    If life gives you a computer...OVERCLOCK IT! :yoda:

  21. #21
    Nice Hardware!!!
    Join Date
    Jan 2006
    Location
    Finland/Tampere
    Posts
    1,852
    DStealth- I will test what PCI-E speed does to my black screen issues. I don't think it will have any affect (I was talking about the onboard PCI-E link chip) I think this issue is similar as 7900GT black screens.

    Does someone know more about the volterra 1165 controller circuit? It would be nice to see pin layout.
    You are as good as your samples are!

  22. #22
    Champion
    Join Date
    May 2006
    Location
    Bangkok, Thailand
    Posts
    1,377
    Woot.. greats score from your first start wait to see more better results

    Keep pushing it
    Sorry For My English
    OverclockZone Team
    THAILAND

  23. #23
    Nice Hardware!!!
    Join Date
    Jan 2006
    Location
    Finland/Tampere
    Posts
    1,852
    Quote Originally Posted by ZoLKoRn View Post
    Woot.. greats score from your first start wait to see more better results

    Keep pushing it
    Thanks mate! Better scores will be coming
    You are as good as your samples are!

  24. #24
    Xtreme Member
    Join Date
    Mar 2007
    Location
    Italy
    Posts
    478
    SF3D : How set the freq of PCI-EX???

    Edit: i test 174.74 beta and 01 is little better than with 173.67
    Last edited by Zannema; 03-30-2008 at 12:09 PM.
    Extreme Overclocker


  25. #25
    Nice Hardware!!!
    Join Date
    Jan 2006
    Location
    Finland/Tampere
    Posts
    1,852
    Quote Originally Posted by Zannema View Post
    SF3D : How set the freq of PCI-EX???

    Edit: i test 174.74 beta and 01 is little better than with 173.67
    Hi mate. What PCI-E MHz I used? From 101MHz to 120MHz, but it didn't make any difference. Only car high is bad with 174.74
    You are as good as your samples are!

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •