Foxconn Blackops. 9800GX2 (28.9K 06)

[SF3D]

I see so many 9800GX2 threads here

Well these are my first test. I got this card yesterday, so I haven't got much time to play with it.

Messy setup:


This wasn't good bench day at all. Everything that can go wrong, did go wrong All parts are still working, so I quess everything is ok after all.
I could be the happy 29K result owner, but 06 test always crashed at some point. I tested it about 100 times today

And last thing is the driver. I did tests with 174.74 and 01 was bad.

Ok.. the screens now.

06: (28915)


05: (36765)


03: (86225)


01: (107420)


AM3: (335.610)


More to come when I get everything work like they should. GPUs could also be more cold than with stock air.

[Zannema]

Really nice start SF3D, i've some problem with 06 and 01, the score is low

What brand is your 9800GX2???

[Turrican]

nice
keep pushing bro

[dpa]

nice scores my friend!! good cpu clocks there to!

[DMH]

5.6Ghz CPU very nice,couldn't you CPU speed be faster on 01?Does it still have a few more megahertz?Congrat's on the scores and better results next time

[PPInDaHouse]

As he already said he hadnt got much time to play yet, Im sure we will see higher numbers soon

[Solarfall]

kwel numbers petri, keep pushing it ...damn i wanna foxconn blackops board too lol

[M3kk]

Nice scores man .

Look at my 2k1




Next time try 173.67 its faster , as you can see in my CH .

[SF3D]

Thanks guys!

Yes I had a lot problems yesterday. For some reason board didn't work like it should. Cpu can do 3DM06 test at 5.75GH (13x442MHz). Score would have been great with that speed.

This morning I did some more benching, but couldn't get any better results.

Little improvement in 01:


E: I didn't remember to open details window in that screenshot. Look at that car high Here is orb link: http://service.futuremark.com/compare?2k1=9356215

[SIOUX]

Very nice The reason your 01 is low, is that you MUST use the 173.67 driver, og CH will be low by 50-60fps. use the that driver, and it will fly

[SF3D]

Damn. I didn't have enough time to test different drivers. Those drivers that I did use are good for 06 though.

[Oliver]

Not bad at all...

Good to see your playing with gx2...

Keep pushing it.

[Zannema]

Damn. I didn't have enough time to test different drivers. Those drivers that I did use are good for 06 though.

I don't understand because my nature is badder of your

[lukas69]

Great score Emanuele

[SF3D]

I don't understand because my nature is badder of your

It must be the drivers or your card is not stable. I think it is the driver.

Great score Emanuele

Wrong thread, but Emanueles score is great

[k|ngp|n]

Very nice SF3D...which driver was the best for 2006 for you?

[SF3D]

Very nice SF3D...which driver was the best for 2006 for you?

Thanks! I think the latest is the best for 06.

By the way. Did you suffer any black screens during your bench session? Did you mod the PCI-E chip voltage?

I had some black screen problems if voltage were over 1.35V or the reason was clock speed. (over 830MHz and PCI-E chip couldn't handle it?)

[SIOUX]

Thanks! I think the latest is the best for 06.

By the way. Did you suffer any black screens during your bench session? Did you mod the PCI-E chip voltage?

I had some black screen problems if voltage were over 1.35V or the reason was clock speed. (over 830MHz and PCI-E chip couldn't handle it?)

Its seems to have some kind of OVP close to 1.4v. I know Vince have seen that, and myself also .....some cards dont seem to have it though. maybe we should try a different BIOS?

[SF3D]

Its seems to have some kind of OVP close to 1.4v. I know Vince have seen that, and myself also .....some cards dont seem to have it though. maybe we should try a different BIOS?

I have to start looking what is causing this.

Hardest tests are 3DM06 GT2 and 03 GT 3/4. Same tests are the hardest for 3870X2 too. That's the reason why I thought about the PCI-E chip. Too much traffic through one chip.. I hope that's not the reason.

[DStealth]

...Too much traffic through one chip.. I hope that's not the reason.

Yes ... i've got the same problem...PCI-e can't handle that much of а traffic , i got a lot of black screens and hang-ups during my test with PCI-e over 115-120 mhz
Never happen before , i was thinking it's driver related (174.74), but it occur even with the official ones ...
Though i manage to break 10k SM2 and near 11k SM3 with fully stock and unmoded GX2 from Gigabyte....
21602

[SF3D]

DStealth- I will test what PCI-E speed does to my black screen issues. I don't think it will have any affect (I was talking about the onboard PCI-E link chip) I think this issue is similar as 7900GT black screens.

Does someone know more about the volterra 1165 controller circuit? It would be nice to see pin layout.

[ZoLKoRn]

Woot.. greats score from your first start wait to see more better results

Keep pushing it

[SF3D]

Woot.. greats score from your first start wait to see more better results

Keep pushing it

Thanks mate! Better scores will be coming

[Zannema]

SF3D : How set the freq of PCI-EX???

Edit: i test 174.74 beta and 01 is little better than with 173.67

[SF3D]

SF3D : How set the freq of PCI-EX???

Edit: i test 174.74 beta and 01 is little better than with 173.67

Hi mate. What PCI-E MHz I used? From 101MHz to 120MHz, but it didn't make any difference. Only car high is bad with 174.74