Xtreme P4PE Vmem Modd
Hi all y'all,
I have already modd the Vmem on my P4PE,I wonder how would I gotta go to modd it more extremly.
The max I can get is 3.23V
I wanna give more juice to the mem .
Thanx by advance.
The Vmem regulator is an APL1581 from ANPEC.
There's the datasheet:
http://www.anpec.com.tw/pdf/APL1581a7.pdf
Last edited by Mad Overclocker; 08-28-2003 at 06:32 PM.
The only way to get rid of a temptation is to yield to it. Resist it, and your soul grows sick with longing for the things it has forbidden to itself.
Raise your 3.3V line, that helps.
Help me, as you have made the change, excuse me but I don't speak well the English.
I am Italian.
Thanks so many.
Ok thanx i'll try to do this.Originally posted by Morkai
Raise your 3.3V line, that helps.
The only way to get rid of a temptation is to yield to it. Resist it, and your soul grows sick with longing for the things it has forbidden to itself.
I doesn't matterOriginally posted by spl
Help me, as you have made the change, excuse me but I don't speak well the English.
I am Italian.
Thanks so many.
You wanna make the Vddr modd ??
I'll try to give u a schema of the modd
The only way to get rid of a temptation is to yield to it. Resist it, and your soul grows sick with longing for the things it has forbidden to itself.
Thanks 1000, aspect with trust.
Check before that u have an APL1581 I.C. near the ddr slotsOriginally posted by spl
Thanks 1000, aspect with trust.
The only way to get rid of a temptation is to yield to it. Resist it, and your soul grows sick with longing for the things it has forbidden to itself.
Found ok.
All u have to do is to put a trimmer between pins 1&2.Originally posted by spl
Found ok.
I have fix a 50k trimmer but 20k or 10k is good:i'm at about 0 ohm
Solder it when it is at this maximum value (ie 50k) and decrease it slowly while checkin the voltage.
Goto here:
http://forum.hardware.fr/forum2.php3...trash=&subcat=
Good luck
I hope ya have a tester or a voltmeter.
Measure between pin 1(or 3) and ground
Make it at ya own risk
Last edited by Mad Overclocker; 09-08-2003 at 07:56 AM.
The only way to get rid of a temptation is to yield to it. Resist it, and your soul grows sick with longing for the things it has forbidden to itself.
I need your opinion and experience.... guys. I have Asus P4PE mobo and i'm about to go ready to mod with 10K resistor on pin 1 & 2 APL1581 from ANPEC.
My question: right know ( before the mod )
427MHz DDR = 2.90V = not stable
400MHz DDR = 2.70V = stable
400MHz DDR = 2.90V = stable
If I want 427 MHz = 2.90V = stable, should I increase more voltage to it? Or is it my PC3200 sucks at 427 regardless the voltage I give in?
My PC3200 is generic with Samsung TC40 modules rated @ 3 - 3 - 3 - 7 by SPD. 256mb x 3 pieces.
Last edited by asw7576; 10-01-2003 at 02:17 AM.
OC till 50
The mod allows you to set any voltage between 2.5V and about 3.25V (according to ya 3.3V rail ).Originally posted by asw7576
I need your opinion and experience.... guys. I have Asus P4PE mobo and i'm about to go ready to mod with 10K resistor on pin 1 & 2 APL1581 from ANPEC.
My question: right know ( before the mod )
427MHz DDR = 2.90V = not stable
400MHz DDR = 2.70V = stable
400MHz DDR = 2.90V = stable
If I want 427 MHz = 2.90V = stable, should I increase more voltage to it? Or is it my PC3200 sucks at 427 regardless the voltage I give in?
My PC3200 is generic with Samsung TC40 modules rated @ 3 - 3 - 3 - 7 by SPD. 256mb x 3 pieces.
I have samsung ram too (original).
Maybe you can reach a highest frequency.
On the P4PE the Cas 3 doesn't seem to work,it set it @ 2.5 (download cpu-z to check it).
The only way to get rid of a temptation is to yield to it. Resist it, and your soul grows sick with longing for the things it has forbidden to itself.
Mad OC.... so you live in France? Wow.... you've got a beautiful country man!!! I just come back from Paris last week.... I'm very pleased.. ... Paris is extremely beautiful city, especially shopping in Champ Ellysees. Good Lord, I want to go again.
BTW, do you suggest to go ahead with the mod? 10K or 20K ohm do you suggest?
OC till 50
Yes,I live in France,thanxOriginally posted by asw7576
Mad OC.... so you live in France? Wow.... you've got a beautiful country man!!! I just come back from Paris last week.... I'm very pleased.. ... Paris is extremely beautiful city, especially shopping in Champ Ellysees. Good Lord, I want to go again.
BTW, do you suggest to go ahead with the mod? 10K or 20K ohm do you suggest?
I suggest you to do the mod,10k or 20k it doesn't matter if it's a trimmer but set it at the max value before soldering it.
And don't set the bios at 2.90v before you mod,because :
BIOS REAL (Tester)
2.5V 2.67V
2.6V 2.67V
2.7V 2.67V
2.9V 2.87-2.88V
I soldered a 50k trimmer (don't have a 10k or 20k) between pins 1 & 2.
You can measure the Vddr between pin 1 and ground or between pin 3 and ground.
I measure between pin 1 and the ground.
I hope you have a tester
The only way to get rid of a temptation is to yield to it. Resist it, and your soul grows sick with longing for the things it has forbidden to itself.
Posting Permissions
Reply With Quote
Bookmarks