realtemp
Thanks for the endorsement.
The gremblins are really out to get me with this board.
I just turned it on and there is all kinds of crazyness. I tracked it down to ... on the Power BIOS page - the FSB Termination voltage is in RED and says 1.84 ... also ... the Southbridge voltage is in RED and says 2.16. I reloaded the factory motherboard BIOS default settungs but they won't change. I tried setting them manually but they still won't change. And the board won't boot into the OS half the time.
Just like that progress takes a dive.
Even though the OCZ RAM has been giving errors, the motherboard shouldn't do that, should it?
__________________
Asus X48 Rampage Formula / Intel Q9450 / 2 x 2GB OCZ Reaper HPC PC2 8500 / VisionTek Radeon HD3870X2 OverClocked Edition /
Western Digital Raptor X Hard Drive / Two Western Digital Caviar RE2 WD5001ABYS 500GB 7200 RPM SATA 3.0Gb/s Hard Drives /
Creative SoundBlaster X-Fi Elite Pro 7.1 / Creative Gigaworks S750 7.1 Speaker System /
Lian Li 343B cube case / PC Power & Cooling Silencer 750 Crossfire Edition
3lfk1ng I was wondering what you run you 8gb ram at? and what other ppl have gotten their 8gb ram to
need some advice here to go higher.
running a P4 540J, ES chip. cant seem to go higher than 16x240 or 14x300,
multi sets the rams to run at 942mhz, give or take a little. definitely within proven limits.
for 14x300, i've already raised the following voltages.
vcore 1.5
cpu pll 1.62
NB core 1.63
FSB term 1.60
SB 1.15
SB 1.5v 1.6
PSU is a corsair VX550w.
where can I find a AMD phenom keychain?
i just received the rampage and im looking for the newest drivers.
the once i got are from last year, but looking in diferent websites (intel,...) and forums i cant find anything clear about it.
which are the latest drivers?? where can i find them??
i wonder if the NB and SB come all together in the same chipset driver...
thank you
Last edited by menko2; 08-24-2008 at 11:17 AM. Reason: add
thank you man; i just go it.
the ones i have left is the LAN drivers. there are so many in asus website and i wonder if all are necesary and where to get the latest version.
any clue in this??
Computer: Intel i7-4770k | Asus Z87 Maximus VI Impact | 240GB Corsair Force GT | 240GB OCZ Vertex 3 | 16GB G.Skill Trident X 2400MHz | EVGA GTX690 Hydro Copper 4GB | Corsair AX850 | Steelseries 7G | Logitech G500 | 27" 2560x1440 Overlord Tempest X270OC 120Hz S-IPS
Cooling: Koolance 380i CPU block | Swiftech Hydro Copper GPU block | EK X3 150 Reservoir | EK X-TOP D5 PWM drive | PrimoChill PrimoFlex PRO LRT Bloodshed red | Alphacool NexXxos 240mm XT45 | Alphacool NexXxos 280mm UT60 | Bitspower Fittings | 4x Bitfenix Spectre Pro 120mm | 2x Bitfenix Spectre Pro 140mm | Lamptron FC-5V2
Case: Custom modded matte black Caselabs Mercury S3
Is someones still using this board with kentsfield? I'm looking for some hint to get this cpu stable past 3.68 Ghz. My actual config is 460x8, but can't manage to get one single more Mhz out of it, tried do add one and two notches to any voltages, and with differents combinations of gtl's, but didn't managed to get anything stable.
So i'm wondering if someone has a template to post/suggest for a stable config with Q6600/Q6700 > 465 or 470x8
thanks
Asus Rampage Formula / Q6700 G0 + TRUE / 4 x OCZ 9200 FleXLC / BFG 8800 Ultra OC / X-Fi XtremeGamer
Enermax Galaxy 1000 DXX / CM Stacker / Dell 2707 / Logitech G15 + G9 + Z5500
My maximus formula have some problem and I will soon replace it by the rampage (I ordered one just yesteday evening). Wich bios is the best with this mobo with a qx9650 ?
Windows XP pro SP2
Windows 7 familly premium 64 bits
Asus rampage extreme II
Intel i920 D0 21x205mhz@1.36V
Circuit cpu : swiftech apoge xt, réservoir MCRES micro, tygon 12/19, pompe sanso PDH 054, radiateur feser 240 X-changer, 4 ventillateurs scyth ultra-kaze 3000 monitorés par un noise-isolator, 2 jupes fabriquées avec des ventillos de 38x120mm et 2 de 25x120mm
Circuit VGA : waterblock eVGA/swiftech hydrocoper, tygon 12/19, réservoir MCRES, pompe ddc3.2 avec top xpsc, radiateur LCR XT2, 4 ventillateurs zalman zm-f3 monitorés par un réostat noise-isolator, 2 jupes fabriquées avec des ventillos de 38x120mm
3x2Go g-skill perfect storm 2133@821mhz 6/7/6/21 1.65V
Pc power and cooling turbocool 860W
eVGA gtx480 fw hc@770/1739/1011
Cambridge megaworks THX550
graveur DVD-RW pionneer DVR 212
lecteur DVD Samsung SH-D163B
Velociraptor 300Go
Crucial M-225 128Go
alienware OptX AW2310
Nvidia 3D vision
Thermaltake Mozart Tx
no more final bios for this bord? 0308 is the finish suport from asus?
MY SYSTEM: BENQ 27" LED XL2720Z | PHANTEKS ENTHOO PRIMO BLACK | EATON ELLIPSE ECO 800VA | ENERMAX PLATIMAX 750W | ASUS Z270 MAXIMUS IX HERO | INTEL i7 6700K | NOCTUA NH-D15S | CORSAIR VENGEANCE LPX DDR4 3200MHZ 16GB | MSI GTX980 GAMING 4GB | ASUS XONAR ESSENCE STX II | LOGITECH Z-5500 | SAMSUNG SSD 850 EVO 500GB | 2x WESTERN DIGITAL GREEN 4TB SATA III | ROCCAT RYOS MK PT | STEELSERIES RIVAL 300 | STEELSERIES 4HD | LOGITECH GAMEPAD F510
it's been a while since i have run this board but had some dry ice to kill and an E8600 that isn't support by the 0219 BIOS so the 1M boost is there. just like the first day i got this board, 580FSB was a piece of cake...
i then threw in an E8400 to test the max FSB with a lowered multi but 600FSB was about the 1M limit. the 1M above was on the 333 Strap with a PL of 9 and a couple phases pulled into 8. voltages were all pretty low with the exception of vNB which was set to 1.71v in the BIOS. stock cooling, as it was out of the box.
Im running a 3370 on this board, have not updated BIOS since I got it about two months ago.
Dropped the chip in, went straight to 3.6, ran it crunching for about 8 hours with no issues, jumped to 3.8, ran that for about 6 hours, now @ 4.01.
keeps telling me I need to update BIOS, which brings me to my question.
I have been keeping tabs on this thread as I own the board.
I have seen many BIOS versions talked about..........frankly I am confused as to why some are running older versions, yet others have moved to newer ones.
Also is anyone else running a XEON on this board?
Oh, I almost forgot! I need to post my Rampage Formula results with dual 4870X2 cards! Okay, here is my Vantage score on the extreme preset:
And here is a picture of the inside of my PC:
I've got Thermalright HR-09 heatsinks on the MOSFETs and HR-07 heatsinks on my RAM. I've got a D-Tek Fuzion V2 on the CPU and a DangerDen MPC-X38 on the NB. On the SB, I have an Enzotech CNB-S1L. The video cards of course are on stock cooling.
My vantage score was achieved with my 24/7 settings which are 459x8 on my Q9450, my FSB:DRAM ratio at 5:6, and currently the 4870X2s at stock speeds.
Installing the 4870X2s went very smoothly, I just popped them in (there were no obstructions), installed the latest Catalyst 8.8 and off they went.
Last edited by 003; 08-29-2008 at 08:47 PM.
Asus Rampage II Gene | Core i7 920 | 6*2GB Mushkin 998729 | BFG GTX280 OCX | Auzentech X-Fi Forte | Corsair VX550
—Life is too short to be bound by the moral, ethical and legal constraints imposed on us by modern day society.
Official 0408 BIOS is up. Once again it just claims "support new CPUs".
Asus Rampage II Gene | Core i7 920 | 6*2GB Mushkin 998729 | BFG GTX280 OCX | Auzentech X-Fi Forte | Corsair VX550
—Life is too short to be bound by the moral, ethical and legal constraints imposed on us by modern day society.
Takel: I have 8 Gig of OCZ Platinum DDR2-1000 and I run it at 1:1 (900) when I an at 450 FBS, But when I run at 425 FBS I run the RAM at 5:6 (1020) I have to set the NB to 1.51 to run stable.
Phelan1777: I have the Xeon X3350, For me 408 is the best BIOS. With this BIOS I can enable LLC and lower my Vcore to 1.27500 and I am stable at 3.6 (450x8). I always heard that LLC did not work with the older BIOS. Without LLC enabled I had to use 1.3V to be stable.
CPU i7 950 D0 @ 4200mhz (183*23) HT on @ vcore 1,30000v/uncore 1,32500v | Cooler Noctua NH-D14 | MoBo Asus Rampage II Extreme rev. 2.01G (X58+ICH10R) | DDRIII 3*4096mb PC3-17000 Corsair DOMINATOR GT CMT16GX3M4X2133C9 @ 1830mhz 8-9-9-24-1T @ 1.53v | Video Gigabyte Radeon HD7970 3gb reference @ 1125mhz | Raid controller LSI MegaRAID SAS 9265-8i PCI-E 2.0x8 SAS 2.0 1gb | HDD 6 x 300gb SAS 2.0 Seagate Cheetah 15K.7 ST3300657SS 15000rpm 16mb @ all in Raid0 | HDD 2000gb SATAIII Hitachi HD723020BLA642 7200rpm 64mb | Sound Creative X-Fi Titanium HD | BD-RW SATA LITE-ON iHBS212 | Case Cooler Master HAF X | PSU Enermax Platimax EPM1500EGT 1500wt | LCD ASUS PA246Q 24'' P-IPS 1920*1200 | Mouse Logitech G500 | LinX 64-bit 24 hours stable | Prime95 64-bit 24 hours stable
Does the problem effect all PCI-E controllers...I mean host-based and IOP based...and if so which manufacturers and what is the size of the firmware/bios on those cards? Try booting with the raid controller in pci-e 2.0 slot #2 (closest to cpu) and gpu in the other lower slot, or could just be a problem with shadow memory allocation for the boot rom. Adaptec for example use an 8MB rom. Figure out the specifics of it and email Asus support, more people that do it the sooner it will be done something about.
DFI LT-X48-T2R UT CDC24 Bios | Q9550 E0 | G.Skill DDR2-1066 PK 2x2GB |
Geforce GTX 280 729/1566/2698 | Corsair HX1000 | Stacker 832 | Dell 3008WFP
mikeyakame! glad to see you back!
find something new about this mobo? new hint to reach higher oc and better stability you want to share with us?
Asus Rampage Formula / Q6700 G0 + TRUE / 4 x OCZ 9200 FleXLC / BFG 8800 Ultra OC / X-Fi XtremeGamer
Enermax Galaxy 1000 DXX / CM Stacker / Dell 2707 / Logitech G15 + G9 + Z5500
Bookmarks