F2-8000CL5D-4GBPQ comptible motherboard list --4/15/08 updated--

[GSKILL TECH]

all tested with 8GB 4DIMM DDR2 1000 2v

compatible motherboards

------------------Download PDF user manual------------------

Abit IX38
Abit IP35-E
Abit IP35
Abit IP35 Pro
Asus X38 Maximus Formula
Asus P5K Deluxe
Asus P5N-D
Asus Striker II Formula
Asus X48 Rampage Formula
Evga 780i
Gigabyte P35 / EP35 DS3 series.
Gigabyte X38 DS4
Gigabyte X38 / EX38 DQ6
Gigabyte X48 DQ6



incompatible motherboards


Asus Commando
Asus P5B-Deluxe


Customer feedback Asus P5W is incompatible







if you having some issue install Vista 64bit with over 3GB of memory, please read this article
http://support.microsoft.com/kb/929777


update @ 4/15/08

[ckoons1]

are these compatible with the DFI LP UT P35 T2R?
THX

[Utnorris]

I am running the P35-DS3R with a Q6600 at 450x8. Can this Ram run at a 1000 at 400fsb with a 2.5 divider? I noticed that the manual talks about using 266fsb and 333fsb.
Thx,
Utnorris

[Utnorris]

I guess I am not going to get an answer. Oh well, lets see what else is out there.

Utnorris

[GSKILL TECH]

450FSB is not the stock FSB, we don't guarantee it works or not. sorry

[Lee13168]

asus p5w DOES NOT WORK with this ram. will not even get to 1000 speeds. Stay away.

[GSKILL TECH]

asus p5w DOES NOT WORK with this ram. will not even get to 1000 speeds. Stay away.

thx for the info

[Lee13168]

By any chance do you have p5w mobo to test the ram on? I'm wondering if i just got bad sticks but chances are ram timings are just not relaxed on p5w because it locks up pretty much all ram control.

[GSKILL TECH]

By any chance do you have p5w mobo to test the ram on? I'm wondering if i just got bad sticks but chances are ram timings are just not relaxed on p5w because it locks up pretty much all ram control.

i don't have P5W in here to test. but i believe P5W doesn't have TRFC at 52+ and that will cause a lot of problem

[Lee13168]

p5w sets it at 42 which pretty much gives me ddr2 900 speeds tops. Going to RMA the sticks and order another 4gig kit. Think F2-8500CL5D-4GBPK will work fine with p5w?

[GSKILL TECH]

p5w sets it at 42 which pretty much gives me ddr2 900 speeds tops. Going to RMA the sticks and order another 4gig kit. Think F2-8500CL5D-4GBPK will work fine with p5w?

no it won't. they both require trcf 52+

[Lee13168]

Well thats a shame. No idea what i'm going to rma those sticks for.

[rmanuelb]

Hi.

I have no problems running 4 sticks on my ASUS P5N32-E SLI !!!

Check it out here.



Regards.

[GSKILL TECH]

Hi.

I have no problems running 4 sticks on my ASUS P5N32-E SLI !!!

Check it out here.



Regards.

G.SKILL does NOT recommend to run F2-8000CL5D-4GBPQ on following motherboards.
Asus P965 Commando, Asus P965 P5B-Deluxe
(Recommneds F2-8000CL5D-2GBPK)
4DIMM on any motherboard with NB nvidia 680i and 650i
(Recommands 2DIMM only

[rmanuelb]

G.SKILL does NOT recommend to run F2-8000CL5D-4GBPQ on following motherboards.
Asus P965 Commando, Asus P965 P5B-Deluxe
(Recommneds F2-8000CL5D-2GBPK)
4DIMM on any motherboard with NB nvidia 680i and 650i
(Recommands 2DIMM only

Is it possible to let me know on what is based this recomendation ??

Is it because puts in danger the components ?

Thank you.

Regards.

[GSKILL TECH]

we tested many 680i and 650i and all of them have problem to run 4 sticks of memory. even confirmed with many motherboard companies

[purostaff]

we tested many 680i and 650i and all of them have problem to run 4 sticks of memory. even confirmed with many motherboard companies

Will I have any problems using only 2 sticks on my 650i SLI? Thanks!

[GoThr3k]

installing windows xp, but my pc will not boot with 2 sticks installed....

i hope i wont have to RMA one of them

the problem is auto volt is 1.8V...
not enough for these sticks

[infinitesadd]

This RAM was recommended to me and I was wondering if it is compatible with my Epox MF570 SLI mobo?

Thank you!

[The Fury]

Compatible with Dfi Lt X48?

[r_rafaeli]

I've purchused the F2-8500CL5D-4GBPK product and installed it on my NEW maximus formula
but for unknown reason I can't get it to work as it shuold - 1066mhz.
I followed that PDF explaining how to install the DIMMs but it still didn't work.
The Maximus formula manual says to change the bios configuration to DDR2-1066 and I did.
The G.skill product requiers 2.0-2.1v and that's what I set.
Unfortunatly the computer doesn't load with these configurations.
I've tried the forums but nothing worked for me.
I ran a test with MEMTEST and it had no errors.

PLEASE help me understand what am I doing wrong???

THANK YOU

[GSKILL TECH]

I've purchused the F2-8500CL5D-4GBPK product and installed it on my NEW maximus formula
but for unknown reason I can't get it to work as it shuold - 1066mhz.
I followed that PDF explaining how to install the DIMMs but it still didn't work.
The Maximus formula manual says to change the bios configuration to DDR2-1066 and I did.
The G.skill product requiers 2.0-2.1v and that's what I set.
Unfortunatly the computer doesn't load with these configurations.
I've tried the forums but nothing worked for me.
I ran a test with MEMTEST and it had no errors.

PLEASE help me understand what am I doing wrong???

THANK YOU

we will check it for you ASAP
what bios you use?

[r_rafaeli]

we will check it for you ASAP
what bios you use?

Hey.
Bios ver is 1102.
I'm sorry to inform that I have no idea how or why but suddenly it works perfectly.
The reason I'm sorry is because I spent full 4 days trying to understand whats wrong, including time on the roads to get back to the store again and again where I bought the DIMMs.

Anyway, last thing I did was testing the memory on Asus P5K-R and it worked with no problem. Getting back to my computer, I threatend it that I'm sending it back. I guess that did the change. =)
All I did was entering bios, changing the configuration to DDR2-1066 with everything else on Auto, without changing volts settings.
Everything works now.

Thanks for your quick support!

R.

[Ramadi]

How about their compatibility with the p5q-e?

[BlueAqua]

Any compatibility issues with the Maximus II Formula?