Must be in the dark for this one... So where did we get these 8800GTS 640mb GPU covers? Spend 9hrs daily doing TSA (Tech Support) work for Endo Rx and have thought I've found everything.. Are these custom?
BRY
Must be in the dark for this one... So where did we get these 8800GTS 640mb GPU covers? Spend 9hrs daily doing TSA (Tech Support) work for Endo Rx and have thought I've found everything.. Are these custom?
BRY
Well another UPDATE
first of all a pair of blue feser liquid
And now all second loop tubing just for see how they looks inside and to adjust little thinks: (WITHOUT any light)
did you think that looks nice? Let's see how they looks with all light power on!
i think its the best pic until now:
And now some impresive pics as well, with the left door:
i know i know, tubing its out of the window, the tubing its only puted to see the distribuation.
I think its perfect case-rad aliniation:
And other pics:
Well i think its an important update too cos the mod its going all well as I would.
Best regards to all and thanks!
Really Good looking where do you have those plates from that cover the graphic cards ???
Well another update, now its turn to turn on the computer with bouth loops working!
Pics of all the computer, no time to make pics of all the parts.
I've changed the raptor 74 for a 150 w/o window, and finalli get a e8400 not an 8500 as fist i have said.
Pics while i'm installing windows:
And now without light:
I have to make a lot of things...
Put all ram's with disipators, mod the corsair ramflow, make the panels, some blue and UV leds and more...
Best regards!!
That looks sick =) I love the black + blue lights + blue coolant, looks very clean. Is that all on a single loop? What kind of temps are you getting with that?
EDIT: Never mind, read first post and see that it's two loops, still what kind of temps?
Current Build: Virtual Cosmos
Cosmos II | Aquaero 6 XT | SuperNova 1000 T2 | EK-CoolStream SE 360, XE 240, CE 140, WE 180
Thanks a lot.
Yeah its 2 loop, the cpu loop is working very well, the 8400 at 4.020 1,34v its only at 17 ambient, 29 at idle, 32 at full.
the second loop its not working as the first but its ok too, vga's are 39-41 idle (first vga-secong vga) and 47-48 full, north at 31 idle 37 full, and south 28 idle 30 full, so its working all properly
Best regards!
That looks awesome Why is the reservoir external? There is a chance it could get broken like that. I love your cable management. Also, is that a 680i board or a 780i?
External its the only way that i can put a big reservoir and its hard that it could get broken, its very resistent.
jeje the cable management until "murderbox" its the same for all mods sleeve all atx wire separately! jejeje
Its a striker extreme 680i, with new bios 1503 working perfectly:P
Best regards
Well some news and pics:
First of all, i have done the lateral panel, changing the exterior acrylic for an interior one a little bit black lets see:
Now some pics of the workcenter:P (without the panel)
And now with the panel:
Now some frontal LCD pics:
Well if you look at the Ram's you'll see that only 1 dim has the sink, i have to buy the other 3. I'm waiting for some 30cm UV cathodes and some blue leds
Best regards!
jaja well hereis duniek
jejej i like fat tubing too,but if you look at the tube that goes from north to south, you'll se that its hard to put them well ... but blue tubing looks amazing, pictures dont make them justice
Some 3mm leds for UV acrylic DD TDX arrived so i'll take some pics tomorrow
Regards!
duniek is the man
Where'd the PSU go? I'm thinking about gettin this case, but is there still room for the PSU after the rads?
1.7%
heay suberb seller!
PSU is at the bottom, there are only one 360 rad at bottom, there is no problem with the space, some people put a pa120.3 and a pa120.2 at bottom with the psu too take a look at most watercooled tj07 and you'll see the rad & PSU position
Regards!
How did you get the rad mounted on the bottom? Or is not secured...
1.7%
UPDATE! i think this time i have made better pictures of the system with and without light. I've installed the corsair ramflow on the memories, look at pics
System completly shut down:
Firsts pics with light and without lateral part and without the ram cooler:
A global view:
And now some better pics with cooler on it:
A detail of the new UV cathodes:
Well its time to power on the machine
First pics with light:
Lets turn off the light:
thats all for now new updates soon with 3mm LEDs on TDX
Regards!
PS: anyone know when i can get a rigid sli bridge?
do those filters you have installed on the back 92mm fans restrict airflow and if so how bad
MY RIG: BLUE DEVIL
CASE*BLACK SILVERSTONE TJ07-MODIFIED
MONITER*32-INCH SAMSUNG WIDESCREEN LCD TV
OS*MICROSOFT XP HOME EDITION SP3
MB*GIGABYTE P35-DQ6 F9B BIOS
CPU*INTEL E7200 3.6GHZ 1.3v
RAM*2GB G.SKILL PK PC8500**DEAD**
PSU*PC POWER&COOLING BLACK QUAD 750W
HD*SATA MAXTOR 150GB 8MB CACHE & SATA WD 250 GB 16MB CACHE
GPU*GIGABYTE HD4670 @ 811/1100
MY WATERCOOLING SETUP
CPU*SWIFTECH APOGEE GTZ
PUMP*SWIFTECH MCP 655
RAD*SWIFTECH MCR320 W/ 3 SCYTHE ULTRA KAZE MED. SPEED
RES*T-LINE
TUBING*DURELENE PVC
COOLANT*DISTILLED WATER & PT NUKE
WORKLOG-Blue Devil TJ07
thX for the tips SaNxU, appreciate the PM. Looks like the blue theme is comin' back. Props, bro.
Nice blue!
Looks to be some tube kinking around the GPU but.
it restrict a little bit, but its better to put them because here are a lot of dust:S
Thanks no problem with PM's! yeah i think blue-black theme its a little better than the others at my eyes
Thanks!
Yeah, its a begining of a kinking... the tube its a little bit short:S its the tube betwin northbridge and southbridge, when I change water i'll thange that tube.
Regards!
Bookmarks