XSPC Radiator Mounting Brackets

[Flip_Lx]

Was wondering if anyone's ever used or seen these before. I'm still planning out the water cooling for my p182 and saw a few people made brackets to mount their rads externally, and was wondering if its the same idea.

Can find it at frozencpu listed as "XSPC Radiator Mounting Bracket Set" (not sure on XS's linking policy)

[Meatpuppet]

Link: http://www.frozencpu.com/products/im...tml?tl=c95s162

They don't look too special to me. Most folks use a radbox ( http://www.petrastechshop.com/swmcrre2raho.html ) for hanging the rad off the back of the case. If you are looking to top mount it, then those XSPC things look a bit ugly.

[Zaskar]

Ive seen people use post like mounts that space the radiator around 1.5 to 2 inches off the case, those any specific radiator mounts or is that just some long hollow metal spacers from a hardware store with long screws through the middle?

[Meatpuppet]

Ive seen people use post like mounts that space the radiator around 1.5 to 2 inches off the case, those any specific radiator mounts or is that just some long hollow metal spacers from a hardware store with long screws through the middle?

The latter, just buy some long 6/32 screws with some spacers (most spacers are nylon BTW).

[Grimtas]

Lowes has 6/32 1" and 2" metal (Silver and anadoized black) standoffs. Or you can try http://www.mcmaster.com/ I'm sure they have them as well.

Look under fasteners and sealing > standoffs