Real Temp - New temp program for Intel Core processors

[unclewebb]

RealTemp 3.70
January 4, 2012
http://www.techpowerup.com/downloads...Temp_3.70.html

RealTemp Tech|Inferno Edition
http://www.techinferno.com/downloads/?did=53



RealTemp is a temperature monitoring program designed for all Intel single Core, dual Core and quad Core processors. It's compatible with Windows 2000, XP, Vista or Windows 7, 32 or 64 bit. In Vista or if you are in a limited account, you will need to right click on the icon and run RealTemp as an Administrator so that the driver will be properly installed.

New features include an updated user interface, a high temperature alarm, reporting of minimum and maximum VID, Quad Core ordering based on APIC ID, log file in CSV format for better Excel compatibility, Up Time counter as well as long term stability improvements.

TechPowerUp is the official home of RealTemp.
http://www.techpowerup.com/realtemp/

When using UAC in Vista or Windows 7, use the Task Scheduler to get RealTemp to start up with Windows. This method allows you to give RealTemp the necessary privileges so it can read your sensors.

http://www.xtremesystems.org/forums/...postcount=3657

With XP or if you are not using UAC, just drag a link to RealTemp.exe into your StartUp folder.
I prefer this method so nothing needs to be added to your registry and you can drag the RealTemp folder anywhere you like and anytime you like.

[hersounds]

thanks man, downloading now and testing with my E8400 am sure that you do a great work!

congratulations!

[zsamz_]

thanks it does work
i like new toys
its 4c lower in temps compared to everest n HMWmonitor

[politenessman]

so i guess this wont be working in vista 64.


its 4c lower in temps than hwmonitor? which temps (in hwmonitor), cputin temp or core #0/core #1 temps?

[unclewebb]

Last time I checked, Everest was using the same TjMax=105C that CoreTemp has been using for the E8000 processors.

[unclewebb]

so i guess this wont be working in vista 64.

At the moment I'd be happy just to hear that it works in Vista32!

[mk-ultra]

nice soft!

if realtemp is right(hopefully) i'm doing 44-46c on load @ 1.2vcore which makes more sense than coretemp/everest @ 54-56c and speedfan is right in the middle @ 49-51c.

you can see the pattern of exactly 5 and 10 degree difference between the softs

suggestion, makes it go to tray please :P

[hersounds]

well,testing the full load and works!



now stop orthos and check iddle and yes the software run excellent



real time bench




real temp highly recommended!

[alcatraroz]

10 degrees lower than everest and coretemp and 5 than speedfan...but when i test idle temp calibration it say that core 1 is bad (core0 ok) so its poss to make correct the core 1 too?nice job...congratulation

[jas420221]

Anyone test in Vista32 yet? I can try it when I get home in 6+ hours...

[okorn]

Its great!

Thanxs Hersounds for the recommendation!

[aoch88]

I've tried doing this in Vista and it doesn't work

[idiotekniQues]

what if you dont know any C++ programming?

[HDCHOPPER]

eye get a run time error ..... maybe cause eye all clocked up to 4.0

[laragirl83]

Niiiice!!
Under Small FFT's test, now real temp shows 10C lower temps than coretemp, is that right?
I am happy now!

[[XC] gomeler]

Reads sub-zero? Would be wicked sweet if it did

[TEDY]

many thanks

http://myfreefilehosting.com/f/2244b24a85_0.05MB

what type of file is this? how to extract?

[JumpingJack]

Wow! Nice post.

[HDCHOPPER]

ok downclocked and still get a runtime error

[wyemarn]

Thanks for the software. The core temp reading is same as speedfan. Only bug I found is my E6320 is detected as Xeon 6320.

[TEDY]

how to run this program?

[laragirl83]

how to run this program?

It is all written down in the very first post....

[hersounds]

tedy download the software then when extract the.rar, search the folder sys,ia32.inf...this is the file that you have install like a new device, and then simple use the .exe and that is all!

[TEDY]

i did installed inf....but where is .exe? :P

[hersounds]

in the same folder that the folder sys!!