Real Temp - New temp program for Intel Core processors

[unclewebb]

RealTemp 3.70
January 4, 2012
http://www.techpowerup.com/downloads...Temp_3.70.html

RealTemp Tech|Inferno Edition
http://www.techinferno.com/downloads/?did=53



RealTemp is a temperature monitoring program designed for all Intel single Core, dual Core and quad Core processors. It's compatible with Windows 2000, XP, Vista or Windows 7, 32 or 64 bit. In Vista or if you are in a limited account, you will need to right click on the icon and run RealTemp as an Administrator so that the driver will be properly installed.

New features include an updated user interface, a high temperature alarm, reporting of minimum and maximum VID, Quad Core ordering based on APIC ID, log file in CSV format for better Excel compatibility, Up Time counter as well as long term stability improvements.

TechPowerUp is the official home of RealTemp.
http://www.techpowerup.com/realtemp/

When using UAC in Vista or Windows 7, use the Task Scheduler to get RealTemp to start up with Windows. This method allows you to give RealTemp the necessary privileges so it can read your sensors.

http://www.xtremesystems.org/forums/...postcount=3657

With XP or if you are not using UAC, just drag a link to RealTemp.exe into your StartUp folder.
I prefer this method so nothing needs to be added to your registry and you can drag the RealTemp folder anywhere you like and anytime you like.

[hersounds]

thanks man, downloading now and testing with my E8400 am sure that you do a great work!

congratulations!

[zsamz_]

thanks it does work
i like new toys
its 4c lower in temps compared to everest n HMWmonitor

[politenessman]

so i guess this wont be working in vista 64.


its 4c lower in temps than hwmonitor? which temps (in hwmonitor), cputin temp or core #0/core #1 temps?

[unclewebb]

so i guess this wont be working in vista 64.

At the moment I'd be happy just to hear that it works in Vista32!

[mk-ultra]

nice soft!

if realtemp is right(hopefully) i'm doing 44-46c on load @ 1.2vcore which makes more sense than coretemp/everest @ 54-56c and speedfan is right in the middle @ 49-51c.

you can see the pattern of exactly 5 and 10 degree difference between the softs

suggestion, makes it go to tray please :P

[alcatraroz]

10 degrees lower than everest and coretemp and 5 than speedfan...but when i test idle temp calibration it say that core 1 is bad (core0 ok) so its poss to make correct the core 1 too?nice job...congratulation

[unclewebb]

Last time I checked, Everest was using the same TjMax=105C that CoreTemp has been using for the E8000 processors.

[hersounds]

well,testing the full load and works!



now stop orthos and check iddle and yes the software run excellent



real time bench




real temp highly recommended!

[jas420221]

Anyone test in Vista32 yet? I can try it when I get home in 6+ hours...

[okorn]

Its great!

Thanxs Hersounds for the recommendation!

[aoch88]

I've tried doing this in Vista and it doesn't work

[idiotekniQues]

what if you dont know any C++ programming?

[HDCHOPPER]

eye get a run time error ..... maybe cause eye all clocked up to 4.0

[laragirl83]

Niiiice!!
Under Small FFT's test, now real temp shows 10C lower temps than coretemp, is that right?
I am happy now!

[railmeat]

Niiiice!!
Under Small FFT's test, now real temp shows 10C lower temps than coretemp, is that right?
I am happy now!

me 2 e8400 at 1.12 v stock on my water 29-31c oc time!! now that i can somewhat trust something temp wise

[[XC] gomeler]

Reads sub-zero? Would be wicked sweet if it did

[unclewebb]

Reads sub-zero? Would be wicked sweet if it did

How far below zero are you going? The Core processors store the DTS temperature in 7 bits of data which gives a range of 0..127.

Temp = 95C - 127C = -32C

The liquid nitrogen guys will need to find another program!

There is a controversy of whether the L2 E4300 has a TjMax of 85C or 100C. I'm betting that the early E4300 had a TjMax=85C which is why my program reads 15C lower than others. Once I get my hands on one or a similar L2 processor I'll do some proper testing and hopefully get this cleared up once and for all. Core 2 Duos don't run very stable at a core temperature of 85C when you are overclocking and overvolting so that's why I'm betting that 70C is actually closer to the truth.

I'll get the Real Temp Xeon bug cleared up by tomorrow.

[zillaoc]

Reads sub-zero? Would be wicked sweet if it did

it does


Edit: Thanks for making a kick ass program m8

Finally something that reads my temps correctly. For some reason with my latest bios in this old ars board
core temp read totally random numbers lol...

[theonlybabyface]

Too bad it doesn't work on Vista x64.

[Grandpa]

Too bad it doesn't work on Vista x64.

It works on Vista 64bit

[xgman]

it does


Edit: Thanks for making a kick ass program m8

Finally something that reads my temps correctly. For some reason with my latest bios in this old ars board
core temp read totally random numbers lol...

I'm going to try this with my maximus formula board, but the recent asus boards won't read negative temps at all even in the bios, so I don't think it will wok on my 9650/phase setup.

[TEDY]

many thanks

http://myfreefilehosting.com/f/2244b24a85_0.05MB

what type of file is this? how to extract?

[Kolpukroll]

many thanks

http://myfreefilehosting.com/f/2244b24a85_0.05MB

what type of file is this? how to extract?

Link not working anymore, anyone?

[stasio]

Link not working anymore, anyone?

RealTemp 3.58.4
http://www.fileden.com/files/2008/3/...alTempBeta.zip