BitsPower Compression Barbs installation

[NoobCake]

Hey all,

i am wanting to get these barbs.. and would like to know if it could be used on the fuzion.. and also on the microRes and the mcr220? is it possible? or do i have to go get a ek supreme instead?

These are the barbs here:
http://www.gammods.com.au/store/inde...roducts_id=514

are they the right ones in disrupts rig?

[disruptfam]

mcres yes and mcr220 yes w/ st transfer base fuzion no

i'm using 3/8 5/8 1/8 fittings and tubing

[NoobCake]

mcres yes and mcr220 yes w/ st transfer base fuzion no

i'm using 3/8 5/8 1/8 fittings and tubing

ok thanks for that disrupt

also the ones i linked they good for 7/16" masterkleer tubing?

damn it, i wanted the fuzion fitted, lol

are your barbs the ones from petras?

[LogAn'sRun]

I got mine direct from the Hong Kong office. Here but you need to use the google translator. Or you could PM BP-Vincent, they are super friendly and willing to ship anywhere.

[NoobCake]

I got mine direct from the Hong Kong office. Here but you need to use the google translator. Or you could PM BP-Vincent, they are super friendly and willing to ship anywhere.

ohh thanks for that..

but i could just get it from GAM as im in AUS also so yeah..

just need some confirmation that those barbs/fittings i linked in OP is the ones EXACTLY like disrupts ( cause i love his build, lol ) and will fit with everything else etc. Now i just know it won't fit the d-tek

anyways, if i get the acrylic top, does it alter the performance in any way? as in temps, installation of barbs, scratches easily?

thanks

[NoobCake]

dw about the fittings.. i got that solved in disrupts thread

thanks man

anyways, need an answer on the EK supreme, ty

EDIT: BTW disrupt, in your post above you said " mcr220 yes w/ st transfer base" for that what do i need to purchase?

also, these will compression barbs will def be safe to use, with no leaks etc? and how does it tighten the tubes? i dont get it.. but it looks sexy, thats all i want!

[disruptfam]

works with ek supreme...

Swiftech rads come with a slight recess a st transfer improves the seal think of it as a adapter of sorts

Compression barbs do what they say screw it down to compress the tubing same thing as a worm clamp,cable tie

[NoobCake]

works with ek supreme...

Swiftech rads come with a slight recess a st transfer improves the seal think of it as a adapter of sorts

Compression barbs do what they say screw it down to compress the tubing same thing as a worm clamp,cable tie

yeah sorry, didnt state it clearly, i meant my above post.

" anyways, if i get the acrylic top, does it alter the performance in any way? as in temps, installation of barbs, scratches easily? "

ok thanks for that disrupt, do i have to purchase anything for the RAD?

thanks for your reply

[NoobCake]

any suggestions?

[NoobCake]

ok guys, i would like to know if the EK-NB/SB ASUS4 Chipset Waterblock here:
http://www.petrastechshop.com/ekaschwaa1.html

would fit these compression barbs?

thanks

[daftDavid]

Doesn't look like it; I think Bitspower fittings need about an inch from hole to hole, or something like that. I don't have those fittings OR that block though, just what I can see from pics.

[NoobCake]

ok then, nw..

also guys.. these compression barbs.. wouldn't it wreck the tubes? making it too tight? as those lines in the screw on thing.. just curious if it would wreck my tubing.. Also these barbs WILL fit my MasterKleer 7/16" tubing 5/8" OD?

[NaeKuh]

ok then, nw..

also guys.. these compression barbs.. wouldn't it wreck the tubes? making it too tight? as those lines in the screw on thing.. just curious if it would wreck my tubing.. Also these barbs WILL fit my MasterKleer 7/16" tubing 5/8" OD?

no the compression for 1/2 was ment to fit 3/4.

Also the 3/8 was is too small for the 7/16ID Tubing.

Basically my understanding is if you go bitspower you to expensive route.


I can Vouch and claim cuz im on it right now, the koolance 13mm Compression nozzles WILL FIT Masterkleer.

[NoobCake]

no the compression for 1/2 was ment to fit 3/4.

Also the 3/8 was is too small for the 7/16ID Tubing.

Basically my understanding is if you go bitspower you to expensive route.


I can Vouch and claim cuz im on it right now, the koolance 13mm Compression nozzles WILL FIT Masterkleer.

Huh? so these: http://www.gammods.com.au/store/inde...roducts_id=514

Compression Fitting Barb, G1/4" to 1/2" ID 5/8" OD, Brass, Nickel-plated

won't fit my desired masterkleer 7/16" tubing? i thought i could put 7/16" tubing on 1/2" barbs for a nice tight fit?

[NoobCake]

Cmon Guys, i would like to order ASAP

[NoobCake]

anyone at all?

ty

[Pedalmonkey]

compresion r different than regular barbs. the tubing has to be a perfect match AKA 1/2ID 5/8OD tubes for those fittings.

[NoobCake]

compresion r different than regular barbs. the tubing has to be a perfect match AKA 1/2ID 5/8OD tubes for those fittings.

damn it.. i cannot find any tubing that matches...

anyone help me out?

how much smaller is 3/8"?

[disruptfam]

not much

[NoobCake]

not much

hmm ok np..

i found these tubing:
http://www.sidewindercomputers.com/ty1id5odlatu.html

are they any good?

quite pricey though

HOLY macro, just did a quote on how much it would cost + shipping to AUS

$50 ZzZzZzZ

[disruptfam]

gam sell tygon did you check out his tubing range?

3/8 5/8 1/8 stuff i will be using is only a tad smaller.. compared to my old 7/16 masterkleer.

Not i.d though

[Nate P.]

Guess who's rig that is: http://www.gammods.com.au/store/inde...oducts_id=94:D

[NoobCake]

gam sell tygon did you check out his tubing range?

3/8 5/8 1/8 stuff i will be using is only a tad smaller.. compared to my old 7/16 masterkleer.

Not i.d though

yeah i have checked out:

Petras
SidewinderComputer
Jab-tech
GAM

Sorry to say but im not really interested in the black tubing stuff.. but i may consider it if i have no choice.. but i would like to know which compression fittings did you use?

to me it looks like this: http://www.petrastechshop.com/dadencofi3id.html

CMON guys help me which one will fit.. really want to get everything before school starts again!

or your reco on which bitpower to get + some clear tubing?

@ Nate, no that is yours

[NoobCake]

Guys, also i would like the biggest/fatest tubing and fitting size

for EG. 1/2" something like that, that can match it

[disruptfam]

Guess who's rig that is: http://www.gammods.com.au/store/inde...oducts_id=94:D

dunno nate looks very familiar