I need black cables but they are just too expensive and id rather not sleeve them for the flat look.
quick question for you guys..
-what kind of spray paint is best for this task? in terms of durability, long lasting, best finish etc.
-do I need to run the cables through some sandpaper?
-anybody ever done this? will I destroy the cable even if I mask the actual connectors?
i5 2500k @ 4.6ghz 1.335v [ASUS P8Z68 Deluxe]
8gb gskill ripjaws f3-12800cl8-8gbxm
600gb velociraptor + 1TB black
MSI N560GTX-TI Twin Frozr II + x-fi xtrememusic
corsair hx-620w + lian li pc201b + dell 2408fpw
d-tek fuzion1/ddc2 + petra top/thermochill pa120.3
id just sleev'em, spray paint would just ruin them
If you are desperate to paint them I would strongly advise using Latex paint is it usually does have a little give and take before cracking. I do mean a LITTLE..........so...........good luck, but you would be better sleeving.
fermiNow Dave will see FERMI where ever I go
Originally Posted by jbartlett323
So please return to the "Darkside of the Moon" and check your "Pulse" while you wait for the "Animals" that will be "Obscured By Clouds". And watch me wave as I say "Wish You Were Here" in "A Momentary Lapse of Reason"
Krylon Fusion? http://www.krylon.com/main/product_t...t=product_list
That would be my best guess. It's suppose to bond with the plastic on a molecular level.
vynil dye spray paint FTW
------------------------------------COMPUTER-----------------------------------------
CPU - AMD Athlon 64 X2 5200+ @ 3000.00 MHz (250x12) (1.424 V) [ADA5200CSBOX]
Cooling - Cooler Master GeminII w/ 2x Antec TriCool 120mm Blue LED Fans
RAM - Crucial Ballistix LANfest PC2-6400 @ DDR2-1000, 5-4-4-10, 2.2v
MoBo - Biostar TF560 A2+
GFX - HIS Hightech H485F512P Radeon HD 4850 512MB 256-bit GDDR3
PSU - Corsair 620W Modular Active PFC [CMPSU-620HX]
HDD - Seagate Barracuda 7200.10 SATA 250 GB [ST3250310AS]
Case - Antec Twelve Hundred Black Steel
i've used krylon fusion, it works great for flat surfaces but i doubt it will work on a sata cable.
Would it really hurt the aesthetics that much if they remained (red or orange probaby?
Just route them out of the way, if they are that bad. otherwise i bet your going to be cleaning paint chip particles out of your case.
As Los Alamos director J. Robert Oppenheimer watched the demonstration, he later said that a line from the Hindu scripture the Bhagavad Gita came to mind:
"I am become Death, the destroyer of worlds."
Test director Kenneth Bainbridge in turn said to Oppenheimer, "Now we are all sons of b**ches." wiki
Best paint is montana cans.
http://www.bombingscience.com/shop-montana.htm
Id give them a light buff of some super fine grit sand paper
When you paint them hold the can fairly far back and just mist them, this will preven drips and give you an even coating.
i dont think paint will work, I would sleeve them. Good luck, if you paint them. Let us know how it works out
won't some type of specialist paintwork out more than buying black sata cables? I'll see if I can get some from the HP machines we fit at work
******************************************
Respec'
System:Bunch of crappy overclocked PC's that cost an arm and a leg
Not really a can of montana harcore is like 4 bucks, crap paint is even cheaper.
Posting Permissions
Reply With Quote
Bookmarks