Start with Moderate. Look at the post of evo one is the same for these modules.
E8400 TRUE120@Asus Maximus Formula@2x2GB Geil Evo One 800MHz 4-4-4@Corsair HX 620W
Sapphire HD6850 1GB@Samsung 830 128GB@Casetek 1022-5@LG 19" 1970HQ
Creative Inspire 5.1 5100@Samsung SH-S203B SA@CM Quickfire Pro Red@Logitech G-600
I really don't know if it's an error on Neweggs part.. but I just purchased 2 sets of this memory at 9:15 on the 6th and they only charged me only $332.45. (NVM, SEE MY EDIT AT THE BOTTOM OF THE POST)
F2-8500CL5D-4GBPK
$189.99 x 2 = $379.98 + $22.47shipping = I should have been charged $402.45
Here is the proof... FROM MARCH 06 2008
When I try to put it it my cart again... the price is back to normal... FROM MARCH 07 2008
Even the shipping and tax price is different
EDIT:
NVM, I just found out that the modules price went up $40 per pair at the stroke of midnight and free shipping is no longer offered atm.
I'm really glad I purchased them when I did. If I had waited another 3 hours I would have had to pay an additional $81.77
When they arrive I will test them out on my DFI RD600 ICFX3200-T2R/G but I mainly purchased them to go into my future Maximus Formula or Rampage Formula.
Last edited by 3lfk1ng; 03-07-2008 at 01:43 AM.
Computer: Intel i7-4770k | Asus Z87 Maximus VI Impact | 240GB Corsair Force GT | 240GB OCZ Vertex 3 | 16GB G.Skill Trident X 2400MHz | EVGA GTX690 Hydro Copper 4GB | Corsair AX850 | Steelseries 7G | Logitech G500 | 27" 2560x1440 Overlord Tempest X270OC 120Hz S-IPS
Cooling: Koolance 380i CPU block | Swiftech Hydro Copper GPU block | EK X3 150 Reservoir | EK X-TOP D5 PWM drive | PrimoChill PrimoFlex PRO LRT Bloodshed red | Alphacool NexXxos 240mm XT45 | Alphacool NexXxos 280mm UT60 | Bitspower Fittings | 4x Bitfenix Spectre Pro 120mm | 2x Bitfenix Spectre Pro 140mm | Lamptron FC-5V2
Case: Custom modded matte black Caselabs Mercury S3
I have 8GB of this running at 1068MHz.
Mobo - Abit IP35 PRO
CPU - Q6600 G0 (Lapped) 400x9=3.6GHz 1.4875volts w/Swiftech Apogee GTX, Swiftech MCR220QP-RES, MagiCool QUAD Radiator, Swiftech MCP655, & Tygon 3603 1/2"ID 3/4"OD.
RAM - G.Skill 8GB F2-8500CL5D-4GBPK (4x2GB @1000MHz 2.000volts)
GPU - EVGA 8800 Ultra [720-1782-1224(2448)]w/Swiftech Stealth VGA Waterblock
HDD - Western Digital Raptor 150GB 10,000RPM (OS) | 2 Western Digital Caviar 500GB 7,200RPM (Data)
PSU - Thermaltake 850W PSU
CASE - Antec Nine Hundred
OS - Vista 64-bit Ultimate Virtual Memory Turned OFF
MONITOR - 24" Samsung 245BW
These things are really bouncing around price wise on NewEgg.
On Feb-25 I paid $169.00
On March-5 it was listed at $154.00
I saw the increase go up to $189.00
Now today, they are $40 off.
I see them listed at $149.99
Wow, I wonder why the prices change so much..
Computer: Intel i7-4770k | Asus Z87 Maximus VI Impact | 240GB Corsair Force GT | 240GB OCZ Vertex 3 | 16GB G.Skill Trident X 2400MHz | EVGA GTX690 Hydro Copper 4GB | Corsair AX850 | Steelseries 7G | Logitech G500 | 27" 2560x1440 Overlord Tempest X270OC 120Hz S-IPS
Cooling: Koolance 380i CPU block | Swiftech Hydro Copper GPU block | EK X3 150 Reservoir | EK X-TOP D5 PWM drive | PrimoChill PrimoFlex PRO LRT Bloodshed red | Alphacool NexXxos 240mm XT45 | Alphacool NexXxos 280mm UT60 | Bitspower Fittings | 4x Bitfenix Spectre Pro 120mm | 2x Bitfenix Spectre Pro 140mm | Lamptron FC-5V2
Case: Custom modded matte black Caselabs Mercury S3
Memory is a commodity, prices change daily.
So far so good
I would call performance "mainstream" but compability is "highend" for me (after having issues with Mushkin ram three times and with kingston one time).
Settings:
Strap "333"
Frequency "DDR 1080"
CR "2T"
Timings "Auto" for beginning
Dram Static Read Control "Auto"
Ai Clock "Strong"
Transaction Booster "Disabled"
-Relax 1
Vdimm "1,96V" Bios, "2,0V" Windows
Processor: i7-920 - Batch#3910A418 - No OC
Temps: Full 4 Core Load-XXc, Idle-23c
Motherboard: Evga X58 SLI Micro
CPU HSF: Xigmatek Black Knight w/MX-2
Memory: Corsair Dominator 6GB (3 x 2GB) DD3 1600
Video: eVGA 580GTX
HDDs: Velociraptor 300GB
PSU: CoolerMaster Gold 800w
Case: Antec Lanboy Air
Add DFI RD600 ICFX3200-T2R/G to list of "incompatible motherboards" ... kinda.
They work just fine, but I am unable to get to windows at anything other than 800mhz.
(Picture taken with default clockspeed and motherboard settings)
Guess I'll have to wait for my Rampage Formula before I can run at 1066.
Last edited by 3lfk1ng; 03-11-2008 at 11:30 PM.
Computer: Intel i7-4770k | Asus Z87 Maximus VI Impact | 240GB Corsair Force GT | 240GB OCZ Vertex 3 | 16GB G.Skill Trident X 2400MHz | EVGA GTX690 Hydro Copper 4GB | Corsair AX850 | Steelseries 7G | Logitech G500 | 27" 2560x1440 Overlord Tempest X270OC 120Hz S-IPS
Cooling: Koolance 380i CPU block | Swiftech Hydro Copper GPU block | EK X3 150 Reservoir | EK X-TOP D5 PWM drive | PrimoChill PrimoFlex PRO LRT Bloodshed red | Alphacool NexXxos 240mm XT45 | Alphacool NexXxos 280mm UT60 | Bitspower Fittings | 4x Bitfenix Spectre Pro 120mm | 2x Bitfenix Spectre Pro 140mm | Lamptron FC-5V2
Case: Custom modded matte black Caselabs Mercury S3
Can I assume 8GB of these are compatible with the Gigabyte X48-DQ6 mobo, since they are with the X38 version? Almost same board except the MCH as far as I understand it.
After replying to you in the other thread.
Yes, it will work just fine.
Computer: Intel i7-4770k | Asus Z87 Maximus VI Impact | 240GB Corsair Force GT | 240GB OCZ Vertex 3 | 16GB G.Skill Trident X 2400MHz | EVGA GTX690 Hydro Copper 4GB | Corsair AX850 | Steelseries 7G | Logitech G500 | 27" 2560x1440 Overlord Tempest X270OC 120Hz S-IPS
Cooling: Koolance 380i CPU block | Swiftech Hydro Copper GPU block | EK X3 150 Reservoir | EK X-TOP D5 PWM drive | PrimoChill PrimoFlex PRO LRT Bloodshed red | Alphacool NexXxos 240mm XT45 | Alphacool NexXxos 280mm UT60 | Bitspower Fittings | 4x Bitfenix Spectre Pro 120mm | 2x Bitfenix Spectre Pro 140mm | Lamptron FC-5V2
Case: Custom modded matte black Caselabs Mercury S3
Any word on the DFI P35 UT/LT incompatibility mentioned by G.Skill in post #62 here:
http://www.xtremesystems.org/forums/...=177713&page=3
So far haven't seen them on the incompatibility list and seems most folks are reporting no problems with the PC28000 version on a P35 LT/UT (which had been reported by G.Skill as also having issues).
Oskar said DK series no problem to run
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
I just got a kit of these. 1 stick boots and runs fine. The other hangs on post code 52. I have tried clearing cmos and different slots. Guess I am going to rma for another kit to see if that works.
I'm thinking about getting those. My mobo is asus p5w deluxe. Anyone knows if they will work fine? Its either this ram or the gskill ddr2 1000. 44 dollar difference but I'm looking for something to run at 4-4-4-12 around ddr2 1000 speeds.
e6600 @3.4
asus p5w (bios 2004)
g.skill F2-6400PHU2-2GBHZ 2gb ddr2 @950 4-4-4-8
evga 8800gts 512mb @779/1098/1913
3dmark06 @14k
Asus Striker II Formula compatible
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
if you having some issue install Vista 64bit with over 3GB of memory, please read this article
http://support.microsoft.com/kb/929777
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
I guess it's nice that Oskar at DFI tested these on the DK P35 for G.Skill.
Any word on exactly what the problem is with these on the DFI P35 LT?
From what I understand, G.Skill does have a DFI P35 LT in house but is still leaving it up to DFI (i.e. Oskar) to determine what the problem is?
Please add the DFI LP LT X38-T2R to the compatibility list. I'm running 8GB and Vista 64bit at rated speeds, 2.1V vdimm. PERFECTLY.
DFI LP LT X38, Q9550 @ 400X8.5 (3.4GHZ), 8GB G.Skill PC2 8500 @2.0V, Powercolor 5870 @950/1250 GHZ with factory installed EK waterblock
Windows 7 64bit
Lian-Li 343B case
Water cooling components in one loop: Thermochill 120.3 to cool CPU and NB,Thermochill 120.2 to cool GPU, DDC3.2 + Petras top for above pumps.
Sometimes I feel like 2/3rds Rice Krispies. Past Snap and Crackle, but just shy of Pop
update 3/31/08
GA X38 DQ6 compatible.
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
Bookmarks