Benching Spi with P5E3 WS Pro under Bertha(s): 7.953s@5708MHz first run @-115C loaded

[before]

Thanks

[pepinorang]

Hey dude,

Have you experienced any coldboots problems on this board ?

[before]

No... and won't in the future cause my Cooler-Master PSU have fried today, killing this board along with a VGA card. That really really sucks!

[jmax_oc]

Before, I don't use this vcore mod but this one :

[before]

Yours doesn't include OVP removal. You may wish to try mine in order to push the vCORE above the OVP limit (if your chip can handle it BTW).

[marmott]

we never reach the OVP with the jmax's mod (what is the limit ?)

[before]

Depends on the board I guess. Maybe 1.82 to 1.84 actual vCORE is the average max for OVP; and then the board stops running.

[jmax_oc]

We were never limited in our benchs (1.95V on yorkfield).

[kayl]

very nice work before, love those 1M and 32M socres

[before]

We were never limited in our benchs (1.95V on yorkfield).

All boards are protected with OVP. Did you actually measure vCORE with a DMM?

very nice work before, love those 1M and 32M socres

Thank you buddy

[blind_ripper]

very nice work before

[Oliver]

Sweet work Before, sad about the psu and vga...

Also clean vmod explanation .

Best Regards.

[dinos22]

All boards are protected with OVP. Did you actually measure vCORE with a DMM?



Thank you buddy

GB X48 have no ovp
and X38 have a simple mod to remove it as well
asus boards have OVP mods as well IIRC

[jmax_oc]

Of course with a multimeter . Maybe that my P5E3 WS have a OVP but over 1.95V which was useless for our benches.

I'm really sad to see that this PSU killed your hardware like it...

[before]

very nice work before

Thank you.

Sweet work Before, sad about the psu and vga...

Also clean vmod explanation .

Best Regards.

Thanks buddy

GB X48 have no ovp
and X38 have a simple mod to remove it as well
asus boards have OVP mods as well IIRC

No OVP on GBs? How high did you ever try to?

Of course with a multimeter . Maybe that my P5E3 WS have a OVP but over 1.95V which was useless for our benches.

I'm really sad to see that this PSU killed your hardware like it...

Thx That's made me sick. The PE3 is a nice board to play with. BTW, I've tons of other ones actually, Foxconns ES, MSI, etc.

[nachthymnen]

Fantastic scores as always
In around 2 weeks I hope to be able to start to play with my new cascade too

[before]

Nice Any pics?