Number of Rads Question??

[mele]

I currently have a 240 and a 360 rad cooling a e8400 and a 8800gtx.
Temps are 41c GPU and 33c CPU at idle with an ambient temp of about 24c.

Would this be sufficient to add NB/SB and mosfets cooling to or should a add another rad or seperate loop?

Thanks,

Mel

[lior307]

SB and Nb -yes , Except Mosfets .
i wouldn't recomment to put on mosfet even if you plan to add radiators

[Meatpuppet]

The primary issue with NB, SB, and mosfet coolers is usually restriction more than the heat dump. If you have a monster pump you might toy with the idea of fitting them in your current loop(s?), but most would run a smaller ID loop to cool these guys.

[Snyxxx]

The primary issue with NB, SB, and mosfet coolers is usually restriction more than the heat dump. If you have a monster pump you might toy with the idea of fitting them in your current loop(s?), but most would run a smaller ID loop to cool these guys.

I do not think they add very much restriction. I added two EK MOSFET blocks and two MCW30s to my loop and my flow rate only decreased by 5%.

[mele]

Thanks for the replies guys!

I'm going to try it in the same loop and see how it goes.

Mel

[Kosior]

I hope you'll tell us about the temps increase :P

[mele]

Whatever.....

[Snyxxx]

Whatever.....

mele,

Here are some of my flow testing results. Many people speak here without doing any real testing to back-up there opinions.

http://www.xtremesystems.org/forums/...ghlight=snyxxx

[mele]

mele,

Here are some of my flow testing results. Many people speak here without doing any real testing to back-up there opinions.

http://www.xtremesystems.org/forums/...ghlight=snyxxx

Snyxxx,

Thanks for that informative link...I had forgotten that I have read it already.

That's the info I was loking for. What about temps?