[SIGPIC][/SIGPIC]
PENT E8400 batch #814A014 ...4.3 at 1.34v~4.7 at 1.45v
FOXCONN MARS
COOLIT Eliminator 7*c idle~27~38*c load $95bucks !
BUFFALO FireStix's ddr2-800 do 1200 eazy at 2.1v
OCZ 2x2 kit pc2 8500 - 1066 @1069 atm
Quattro 1000W
Radeon 2-4850's in crossfire
OCZ Vertex SSD thanks Tony!
ALL PIPED INTO HOUSE AIRCOND ;}
*QUANTUM FORCE* saaya & sham rocks !
*REAL TEMP*
At least you've got some Xtreme software now for working in Xtreme situations! "Unclewebb" rocks !
*MEMSET* Felix rocks !
*SUPER TEC MAN* UncleJimbo rocks !
OVERCLOCKERS MAG..http://www.xtremesystems.org/forums/...d.php?t=197660
is Q750A071 a e8500 or a e8400 on dope? lol just wondering cause i was looking through the batch numbers and can only find Q750A batches for e8400....
Desktop:
CMS Stacker STC-T01
Central Processing: Dfi Lanparty Lt x48 T2R / Core 2 Duo E8500 (Q750A071) / 8GB OCZ Reaper DDR2-1066
Cooling: Thermalright Ultra 120 Extreme w/ Thermaltake Thunderblade 120mm fan
Drives: 2x 200 GB Western Digital SataII in Raid 0, 500gb Seagate, 1000gb Western Digital, 2x Lite-On 16x DVD-R/RW
Networking: D-Link DGL-4100
Video: EVGA 8800 GTX / Samsung 226BW 1680x1050 LCD
Audio: Creative X-Fi Fatal1ty / Logitech Z-5500 / Medusa Progamer 5.1 Headset
Input: Razer Copperhead / Logitech G15 / Steelseries 5L
Power Delivery: Tagan 900w Quad Sli Turbojet
Overclock: 422x9 1.35v 333/800 Strap
Get your Tweaked Drivers for your graphic card
My new Q816A passed OCCT 1hr cpu test at 4.2 (8.5x495) with 1.33v bios set on my maximus formula.
Prime95 small fft failed at this setting in 1hr 18 minutes.
Now test 4.2 with 1.35v bios set. I really wish I could find the vcore reading point for this board so I knew the exact voltage since this board droops.
the bes way i can describe it
http://images.google.gr/images?clien...89%CE%BD&gbv=2
CPU : Q9550 / Board : Asus P5E64 WS Evolution / Ram : 2x1 OCZ D9GTR DDR3 / Vga : HD 4870 / PSU : PPC&C 750W / SSD Ocz Vertex 30Gb / All under Water & Tec's
Overclockers Wannabe Athens Dept...
Q816A092
E8400
Asus Maximus Formula Bios 1201
2x2GB PC8000 4GBPQ
Watercooled
1.35 volts bios (actual unknown)
so it looks like my e8500 805 batch according to the bios (i just set it up) says at stock speeds its 1.22v?? is that not high for stock settings??
upgrading...cooler master cm690 case, corsair hx850, samsung 1tb x 3, optiarc burners x2, gskill 4gb ripjaws, working on the rest again
So ive Cracked 600FSB and Sub 9 SuperPI check it out, some pics
These are before .... prepping my board
I spray painted my mother board back and front around the cpu socket with Clear Laquer
Add some Alcohol, give the Dice about -20 + onto what it is at -55 so thats -75 to -87 degrees
And now Some Benchies
Some rig shots
Then Idle Temp
W00t.
Thats all for now.
Last edited by DoObs; 07-11-2008 at 09:29 AM.
Core2Duo E8400 SLAPL Q743A689 BX80570E8400 DICE @ 5.22ghz 8.875 SuperPI 1M
DFI Lan Party UT P35 T2R - DEAD NOW - Overbaking isnt working
Crucial Ballistix Tracers DDR2 1066 kit
Core i7 Sandy Bridge 2600K @ 4.3ghz
MSI P67A-GD80 (B3)
Kingstons 8gig kit DDR3 1600 T1's
Xonar D2X Sound Card
Inno3D 470GTX 1.5gig
Antec Trio True Power 650watt
Samsung T260 LCD
Logitech z5500's Surround Sound
Kingston 128gig SSDNOWV100 series
Sammsung 1x 1TB drives, Seagate 500 SATA2
Asetek Watercooling Custom
Custom Wooden case
How much NBv does 600 need? Do you have a thread for your MB? Link please.So ive Cracked 600FSB
E8600 (Q823A221)
Asus Rampage Formula
2x2G G.Skill DDR2 1066
2 MSI 4850's CF
750w PC Power & Cooling
Liquid cooled
Core2Duo E8400 SLAPL Q743A689 BX80570E8400 DICE @ 5.22ghz 8.875 SuperPI 1M
DFI Lan Party UT P35 T2R - DEAD NOW - Overbaking isnt working
Crucial Ballistix Tracers DDR2 1066 kit
Core i7 Sandy Bridge 2600K @ 4.3ghz
MSI P67A-GD80 (B3)
Kingstons 8gig kit DDR3 1600 T1's
Xonar D2X Sound Card
Inno3D 470GTX 1.5gig
Antec Trio True Power 650watt
Samsung T260 LCD
Logitech z5500's Surround Sound
Kingston 128gig SSDNOWV100 series
Sammsung 1x 1TB drives, Seagate 500 SATA2
Asetek Watercooling Custom
Custom Wooden case
Eish i crapped myself, luckily for that spray paint.
Check this
My pc didnt work for a lil while. for some reason i can run my ram in Dual channel, what could be the problem....screwed up the NB a bit maybe...
Comments are welcome
Core2Duo E8400 SLAPL Q743A689 BX80570E8400 DICE @ 5.22ghz 8.875 SuperPI 1M
DFI Lan Party UT P35 T2R - DEAD NOW - Overbaking isnt working
Crucial Ballistix Tracers DDR2 1066 kit
Core i7 Sandy Bridge 2600K @ 4.3ghz
MSI P67A-GD80 (B3)
Kingstons 8gig kit DDR3 1600 T1's
Xonar D2X Sound Card
Inno3D 470GTX 1.5gig
Antec Trio True Power 650watt
Samsung T260 LCD
Logitech z5500's Surround Sound
Kingston 128gig SSDNOWV100 series
Sammsung 1x 1TB drives, Seagate 500 SATA2
Asetek Watercooling Custom
Custom Wooden case
My batch # is hiding under my zalman.
http://valid.x86-secret.com/show_oc.php?id=387003
i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
Asus P8P67 Vanilla
Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
Diamond HD 7970
WD 600GB Velociraptor
Corsair TX750W
CM 690 II Advanced
Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762
G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839
i just got my Q813A E8500 from the egg. Priming large at 4275 (1900fsb) 475x9 now will post more when i drop voltages. My Q807 E8500 runs 24/7 at 4275 1.42v post degradation. I just dropped the new chip in and dropped vcore to 1.35. been priming 30mn. If this runs 45min i'll drop volts and raise FSB some. bbs
Last edited by nugzo; 07-11-2008 at 09:44 PM.
Gigabyte Z68X UD7
Intel Core i7 2600K (testing)
16GB Mushkin Redline 17000 2133 1.65v
EK, 3x120 Rad 2xMCP655
Acer 1200w PSU
2-128GB Samsung SSD RAID 0
2-1TB Seagete 32mb RAID 0
1-1TB Western Digital
1- Plextor PX-B320SA Blue Ray
1- Plextor PX-880SA 24x DVD/RW
2- EVGA Nvidia GTX-480 SLI
LG 30", Hanns G 28"
well i got a crap chip i guess. my vid is 1.225 and ive reseated the heatsink 3 times now vertical and horizontal and my core 2 temps is nearly 5-6 deg higher than core 1 under any stress.. ive tried mx-2 and as5 also.. why cant i ever get a low vid chip.. arghh this sucks batch was Q805A500 and i just freaking got this one from newegg and everyone else is getting these nice 817's or 816's and why the heck i get this thing..stock voltage with cpuid is 1.235v already
i also think one on the temp sensors is getting stuck. core #0 seems to not move at all when i check the sensors with real temp where core#1 jumps up and i get about a 5-10 difference in the sensor test between cores???
Last edited by zfactor; 07-12-2008 at 12:52 AM.
upgrading...cooler master cm690 case, corsair hx850, samsung 1tb x 3, optiarc burners x2, gskill 4gb ripjaws, working on the rest again
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
Im going to get a 8400, which week should I try to find?
Ill use with a p5k moded, how will it work?
Thanks for help.
real life
Excell OC list (not 100% up to date)
http://users.pandora.be/OAP/wolfdaleOClist.xls
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
with core temp 99.1 it says 1.15 for vid. temps are fine overall im idling at 33-34 but when i load it i see core 1 jump fast and it takes core 0 a while if sometimes at all for the temp to rise..even with core temp it appears core 0 just sits there temp wise until a large increase is needed but at idle it reports both cores within 1 deg of each other.. its just that core 1 will say jump to 48 where core 0 sits a idle temps then when core 1 hits just over 50 core 0 will finally jump up also???? and core 0 will never go below 34 deg ever.. where core 1 will drop to maybe 32-33 at idle.. it juts looks like core 0 is locked at 34 all the time till a large temp increase is shown. so do i guess i have a bad temp sensor huh??
so is 1.15 decent for the vid on these??
Last edited by zfactor; 07-12-2008 at 05:09 PM.
upgrading...cooler master cm690 case, corsair hx850, samsung 1tb x 3, optiarc burners x2, gskill 4gb ripjaws, working on the rest again
Swapped my Q6600 with my baby brother's E8500 on the offchance that it might be a good one...
Turns out it was a Q745A809 purchased back in February, I'd heard good things about the Q745A's but when I got it installed I found it had a pretty disappointing VID of 1.225
Anyway messed about with it a bit and got this:-
Might ebay it and try something else.
Q6600 G0 L720B058 @ 3.8GHz | Asus Maximus Formula (Rampage 0403 Modded) | 4x2Gb GSkill PC8000 PQ @ 1015MHz | XFX 9800GX2 XXX @ 680/2080 | 2 x WD Raptors RAID0 | 1 x WD5000KS | Samsung S203B DVDR/W | Samsung SM245B + Panasonic TX37LZD80
D-Tek Fuzion | PA120.3 + Shroud + Nexus Fans | MCW30 | Laing DDC w/ Petra's DDCT-01s Top Combo | Tygon 1/2" Tubing | T-Line
Ok. I think I finally got my overclock stable. As you can see from the pics, it passed a 5 hour small FFT test in Orthos and I just started a blend test to make sure that the ram is stable. If all goes well, I will try for a 4000 Mhz overclock later today.
What do yall think of the Vcore? It seems like this chip is a pretty good overclocker. Batch Q815A418
The temps are a bit high, but after I lap my heatsink and processor, those should go down.
------------------------------------------------------
Main Rig
PSU - Corsair TX750W
Board DFI LP LT x48 T2R
CPU - E8400 4.0 Ghz 9 x 445
Cooling - AC Freezer 7 - 36 idle 58 under load
Mem - 2X Corsair XMS2 2GB DDR2-800 (OC to 890)
OS -Vista Home Premium X64/Ubuntu8.04
GPU - VisionTek 900241 Radeon HD 4850 512MB
HDD - 2X Western Digital Caviar SE16 640GB 7200 RPM RAID 0
Case - Antec 900
I know that when you run Large FFTs, the 5 minutes are crucial for the ram ...if in this minutes you don't have any error, you have 99% stability on u're ram...that's right ? ...anyway...
Vcore 1.33 bios (i lowered the Vcore)
Vcore idle 1.280
Vcore under LOAD 1.208
Ram at 980 mhz 5-5-5-15 @ 2.1V
NB 1.4
PLL 1.5
FSB TERMINATION 1.3
Core Temp show me 75 degres and Real Temp show me 65 degres...my cooling is ZALMAN 9700CNPS (high RPM for test), the case is Tagan A+ Twin Engine...what degres are right?
Last edited by So3oL4Nu; 07-12-2008 at 04:14 PM.
Xclio A380 | E8600 4.5GHZ | Swiftech MCP665 | Black Ice GTX 360 & Magicool 360 Xtreme | D-tek FuZion V2 | Asus Striker II Formula | 2x2 G.Skill 1200mhz | 2x WD 250GB, WD 500GB | GTX 260 SLI with EK WB | Corsair HX750| Samsung 245B+ | Logitech G15 | Logitech Z-5500 | X-FI Elite Pro | Logitech G25 | Razer DB@QcK+ | Xbox Wireless Controller|
http://www.mygarage.ro/pc-tuning-mod...tercooled.html
Bookmarks