**Official e8400/e8500 Retail OC Thread

[unclewebb]

Nah, no chance of that, unfortuantely.

I didn't think so. It sounds like your on chip sensors might be a little screwed up. Your processor won't start throttling until DTS=0 and you are still a long ways from there.

Set up CoreTemp like this and it will report readings from the DTS directly and show you how far you are away from throttling.



Intel hasn't changed the location or format of this data so CoreTemp does not need to be updated to read it. CoreTemp's interpretation of this data may have changed but all versions of CoreTemp that have this option should have no trouble reading the DTS sensors and should report the same thing.

[WrigleyVillain]

Heat problems reported for Intel e8400s

[Motley]

I didn't think so. It sounds like your on chip sensors might be a little screwed up. Your processor won't start throttling until DTS=0 and you are still a long ways from there.

Set up CoreTemp like this and it will report readings from the DTS directly and show you how far you are away from throttling.



Intel hasn't changed the location or format of this data so CoreTemp does not need to be updated to read it. CoreTemp's interpretation of this data may have changed but all versions of CoreTemp that have this option should have no trouble reading the DTS sensors and should report the same thing.

I can't seem to get Coretemp working on Vista x64. It errors out, and I tried running with administrator.

Any thoughts?

[Bail_w]

I can't seem to get Coretemp working on Vista x64. It errors out, and I tried running with administrator.

Any thoughts?

Disable Signature by pressing F8 before the OS loading. Make sure you are not installed all the window updates. Otherwise, it doesnt matter if you disable the signature it weren't work.

[unclewebb]

If CPU-Z works with Vista x64 then use it to read the DTS data directly as explained in post #647.

It's a little more complex than CoreTemp but will return the exact same info.

[Xvys]

So the read out of CPU temp by a program like Abits uGuru, should be what I look at and be concerned over, not each individual core, via core temp software? At least that is the opinion as far as Intel are concerned?

Intel has said that E8400 users should ignore their core temp readings and instead concentrate on the cpu temps, which they recommend as 61.4C (or perhaps 72.4C as was noted in another post) being the maximum. I would check your bios cpu reading and compare it to any Windows software program you are using. My bios temp reads about 4C higher than most software readings.

[Merc14]

Intel has said that E8400 users should ignore their core temp readings and instead concentrate on the cpu temps, which they recommend as 61.4C being the maximum. I would check your bios cpu reading and compare it to any Windows software program you are using. My bios temp reads about 4C higher than most software readings.

My CPU temp (Tc) seem to be in-line with what I expect. Could you link us to where Intel has made this announcement? I'd love to read the details.

[avrionis]

HI guys, i hit a brick wall with my e8400, keep gettin the "FATAL ERROR: Rounding was 0.5, expected less than 0.4" message in prime past 4.3 ghz. aiming at 4.5 but no vcore will satisfy the beast. my assumption so far is that these chips dont need that much vcore to hit sky high but its other settings like cpu ppl, fsbt, and those gtl thing but have no idea what to set.

anyone running this chip on maximus formula?
so far am at 500fsb, stable @ 8.5 multi but when i change to 9 nuthing seems to work
@ 500x 8.5 am 24hrs prime stable blend
1.425vcore
1.5v cpu ppl (bios set)
1.54 fsbt(1.43 actual)
2.3vdim @ 5-5-5-5-3-35-6-3 @ 1200( passed 12 prime + 24hrs blend)
1.65nb
1.18sb
1.55 sb2

any tips on gettin it stable with multi 9 .

rig
maximus formula se (907)
e8400(Q745a372, 12/20/07, 1.1125vid)
2gb crucial ballistix tracer 8500
2x 80gb seagate sata raid 0
2x saphire 2900gt CF(disabled when priming)
Swiftech 220 compact kit(4x scythe 1500rpm fans on rad)
northbridge and cpu loop.
load temps at 1.425(nb39-41, cpu 54-58, cores 58-62 both same, sb 35)
idle 30cpu, 38cores, nb 38, sb 32)

@ 9x 500 tried 1.45, 1.47. 1.48.1.5 and 1.525(load at 63cpu) and nothing seems to work. any tweakin guru's please tip me. thanks.

I had a e8400 had the same results.. Had great temps! But past 4.2...I would immediately get those errors on core2. I had tried many different voltage combinations but no luck.. Sent it back..

[avrionis]

Did you try to find the max fsb first?

You might 've hit an fsb wall, more people report trouble to get over 500fsb on the maximus.

Try to find the fsb max with multi 6x first.

I agree, I know my cpu does not have luck with my mobo past 510-515 fsb! I too have a maximus! Is there anyway to help this board!

[Jeremy617]

Heres my 24/7 on water.

[Mickey Padge]

Intel has said that E8400 users should ignore their core temp readings and instead concentrate on the cpu temps, which they recommend as 61.4C (or perhaps 72.4C as was noted in another post) being the maximum. I would check your bios cpu reading and compare it to any Windows software program you are using. My bios temp reads about 4C higher than most software readings.

My BIOS CPU temp seems to be spot on with uGuru

Idle 33c load 49c, cooler by 5-9c ish over core temp readings. My CPU gives out weird temps via core temp, one core is 5-8c hotter than the other, as I mention in a previous post.

uGuru temps seem more in line with what I would expect from my WC rig.......

Cheers!

[Origin_Unknown]

my e8500 will not post anymore

[Bail_w]

my e8500 will not post anymore

what happened? be more specific?

[Blackwhite]

my e8500 will not post anymore

Is 850W PS killed your config?

[synna]

It's still quirky but it's not crashing. Will update soon with final settings choice.

[C-N]

my e8500 will not post anymore

Sorry to hear that bud :-(

[avrionis]

Heres my 24/7 on water.

What kind of cpu or core temps do you get on orthos or something?

[Origin_Unknown]

what happened? be more specific?

see below

Is 850W PS killed your config?

yep, its the only thing it did kill which is weird. my board has survived after a week in surgery

Sorry to hear that bud :-(

me too; im going to raise an rma tomorrow and get a new one

[mercyless]

my e8500 will not post anymore

my e8400 has degraded somehow, from 4.3ghz, 6 hrs stable run to stock now,
no matter what i do, any overclock is unstable

[Origin_Unknown]

my e8400 has degraded somehow, from 4.3ghz, 6 hrs stable run to stock now,
no matter what i do, any overclock is unstable

mine wouldnt boot even at 4ghz... then the psu went south

[mercyless]

sorry to hear that, lets hope rma,s are swift for you.

[Jeremy617]

What kind of cpu or core temps do you get on orthos or something?

Both core temperatures are broken in all programs, but asus software has the cpu temp reading at 50 on load.

[CyberDruid]

http://valid.x86-secret.com/show_oc.php?id=306616

1.408 Vcore

[Retro]

Nah, no chance of that, unfortuantely. First tiem removing the cooler from the box, and the imprint was as good as it gets. I'm just blown away that the cpu has not throttled at all. I guess I must be pretty close to that point tho, on stock cooling.

Maybe that's why the "T" in my FPO...who knows.

Nobody knows-or will tell. Intel doesn't want you to know about the "T".
It's a conspiracy, I tell ya, a cons...................ackkkkkkk

"Retro will be temporarily unavailable until he has been re-programmed about our fine Intel processors."
Department of Internal Affairs and Propaganda,
Intel Corporation

[unclewebb]

my e8400 has degraded somehow, from 4.3ghz, 6 hrs stable run to stock now,
no matter what i do, any overclock is unstable

Try running MemTest86+ at default CPU MHz and adjust the divider to bring your ram up close to the normal speed you run it at. I've seen more ram go south than cpus but anything is possible. If you have some spare ram available swap it in and see what happens or try using one stick at a time to isolate your problem.