Page 4 of 4 FirstFirst 1234
Results 76 to 87 of 87

Thread: ASUS Striker Extreme offical 1401 BIOS 2008/1/10 released

  1. #76
    Registered User
    Join Date
    Oct 2005
    Location
    São Paulo - Brasil
    Posts
    85
    I'm doin some tests here. With BIOS 150 memory never went above ddr2 800 unless sli-ready was enabled. Now with newer 1504 I can boot prime stable @ 3600MHz and 1.25v with a E8400 here.
    No stability with anything over 400~405fsb though no matter how much voltage I kick'd in. Tried 1.4v for vcore and up to 1.6v at the NB with no success. It might be an FSB hole like I had with my E6400 but even @ 420fsb i have no success. Waiting for a newer bios now.
    To see setup w/ pics (no pics on the overclockin' part yet) see lab.gamer.com.br


    Complete config:

    Striker extreme
    E8400
    Seventeam ST750EAJ (sli ready - powered up 2 GTX with it)
    2x 8800GT
    2x1Gb OCZ DDR2 900 SLI Edition (4-4-3-15)
    & stuff...



    Any suggestions?? Aiming for 4.0GHz.
    Last edited by Malk4vi4n; 03-24-2008 at 04:56 AM.
    MalkbookII Asus G1S Notebook | C2D T7500 rev. G0 @ 2.2GHz 1.000v (undervolt) | 2Gb DDR2 667 5-5-5 | GeForce 8600M GT 256Mb @ 500/800 | 15" LCD @ 1680x1050

    EeePC EeePC1000HA | 2Gb Ram | 160Gb HD | 10.2"

    Malkserver ECS 650I SLI mobo (crappy, crappy mobo) | E2160 @ 2.250 1.2v | 2Gb DDR2 800 @ 1000 5-5-5 | Asus 8400GS @ 800/1800/435

  2. #77
    I am Xtreme
    Join Date
    Sep 2006
    Posts
    10,374
    FSB hole means a no post, if it posts it isn't an FSB hole it's just insufficient settings...

    Does it post or not ? at 405 ? if I was you I would try straigh to 425 or 450 FSB and run the ram at 1:1 so for 450FSB set ram at 900mhz...
    Question : Why do some overclockers switch into d*ckmode when money is involved

    Remark : They call me Pro Asus Saaya yupp, I agree

  3. #78
    Xtreme Addict
    Join Date
    Oct 2004
    Location
    London UK
    Posts
    1,392
    I'm in the middle of a build so I can't test the striker with the E8400 I'm hoping for 4.0Ghz with SLI so this is a trifle disconcerting. I am loathe to buy another board but it's looking that way. leeghoofd weren't you going to revive an old striker? Malk4vi4n can I have the 1504 BIOS please.
    Just heard from Ice_Chiney he has his E8400 stable at 4.0ghz @1.43v.......... it's doable on da striker with 1503
    Last edited by RADCOM; 03-25-2008 at 08:23 AM.
    ******************************************
    Respec'
    System:Bunch of crappy overclocked PC's that cost an arm and a leg


  4. #79
    I am Xtreme
    Join Date
    Sep 2006
    Posts
    10,374
    I still haven't got it Radcom .. it was from a forum member GizmoSLI, he shipped it about 20 days ago from Iraq, Board is not here yet, and really doubting if it will ever arrive...
    Question : Why do some overclockers switch into d*ckmode when money is involved

    Remark : They call me Pro Asus Saaya yupp, I agree

  5. #80
    Registered User
    Join Date
    Oct 2005
    Location
    São Paulo - Brasil
    Posts
    85
    Quote Originally Posted by RADCOM View Post
    I'm in the middle of a build so I can't test the striker with the E8400 I'm hoping for 4.0Ghz with SLI so this is a trifle disconcerting. I am loathe to buy another board but it's looking that way. leeghoofd weren't you going to revive an old striker? Malk4vi4n can I have the 1504 BIOS please.
    Just heard from Ice_Chiney he has his E8400 stable at 4.0ghz @1.43v.......... it's doable on da striker with 1503
    PM me your e-mail and I send u the BIOS right away!
    MalkbookII Asus G1S Notebook | C2D T7500 rev. G0 @ 2.2GHz 1.000v (undervolt) | 2Gb DDR2 667 5-5-5 | GeForce 8600M GT 256Mb @ 500/800 | 15" LCD @ 1680x1050

    EeePC EeePC1000HA | 2Gb Ram | 160Gb HD | 10.2"

    Malkserver ECS 650I SLI mobo (crappy, crappy mobo) | E2160 @ 2.250 1.2v | 2Gb DDR2 800 @ 1000 5-5-5 | Asus 8400GS @ 800/1800/435

  6. #81
    I am Xtreme
    Join Date
    Sep 2006
    Posts
    10,374
    I got the old board from Gizmo, a bit beaten up by it's travel from Iraq to Belgium but the board posted immediately out of the box... with an E6300... I redid the heatpipe with fresh TIM and popped in the Q6600... 1305 wasn't very cooperative so I flashed straight to 1503... 400FSB Q6600 works nicely though I'm limited there with cooling ( used my Qx9650 cooler at max speed ) though it cannot keep the CPU below 65°C at 3.6Ghz so I limited my test at 3.2Ghz... OCCT stable for 2 runs in a row...



    Keeping ram in sync and at 2T needs less NB voltage... I wonder what it will do with the E8400...

    FSB - Memory Clock Mode: Unlinked
    x FSB - Memory Raio: N/A
    FSB (QDR), Mhz: 1600 (means 266FSB)
    Actual FSB (QDR), Mhz: 1066.7
    MEM (DDR), Mhz: 800 (means 800mhz speeds)
    Actual MEM (DDR), Mhz: 800

    Vcore Voltage:1.3
    Memory Voltage:2.0
    1.2v HT Voltage:1.45
    NB Core Voltage:1.4
    SB Core Voltage:1.5
    CPU VTT Voltage:1.35
    Question : Why do some overclockers switch into d*ckmode when money is involved

    Remark : They call me Pro Asus Saaya yupp, I agree

  7. #82
    I am Xtreme
    Join Date
    Sep 2006
    Posts
    10,374
    Some tests with Qx9650, multi is still locked : bummer and then some bandwith tests 1T and 2T... board seems to handle the speed fine, gonna leave my Qx in it and play some on the rig tonite... to see if it will hold up...





    Question : Why do some overclockers switch into d*ckmode when money is involved

    Remark : They call me Pro Asus Saaya yupp, I agree

  8. #83
    Registered User
    Join Date
    Oct 2005
    Location
    São Paulo - Brasil
    Posts
    85
    Hey mate, had any luck above 400FSB yet?
    MalkbookII Asus G1S Notebook | C2D T7500 rev. G0 @ 2.2GHz 1.000v (undervolt) | 2Gb DDR2 667 5-5-5 | GeForce 8600M GT 256Mb @ 500/800 | 15" LCD @ 1680x1050

    EeePC EeePC1000HA | 2Gb Ram | 160Gb HD | 10.2"

    Malkserver ECS 650I SLI mobo (crappy, crappy mobo) | E2160 @ 2.250 1.2v | 2Gb DDR2 800 @ 1000 5-5-5 | Asus 8400GS @ 800/1800/435

  9. #84
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    PMP, are you still watching this thread?
    Do you know anything about new BIOS revisions?

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  10. #85
    I am Xtreme
    Join Date
    Sep 2006
    Posts
    10,374
    Tesqted the Striker with a Wolfdale E8400 today.. also I replaced that dreadfull heatpipe with thermalright solutions as they seem to cool way better than that wannabe copper thing...

    some piccies of my current 2nd rig setup... board runs fine with 1504 bios and E8400... at the moment testing 400FSB/RAM 800... will try higher tomorrow...

    CPU Vcore : 1.2750
    1.2 HTT : 1.35
    NB : 1.35
    SB : 1.5
    CPU VTT : 1.3



    Question : Why do some overclockers switch into d*ckmode when money is involved

    Remark : They call me Pro Asus Saaya yupp, I agree

  11. #86
    Xtreme Addict
    Join Date
    Aug 2004
    Location
    Minneapolis, MN
    Posts
    2,187
    Where is the 1504 bios? I haven't heard of it yet.

  12. #87
    I am Xtreme
    Join Date
    Sep 2006
    Posts
    10,374
    Question : Why do some overclockers switch into d*ckmode when money is involved

    Remark : They call me Pro Asus Saaya yupp, I agree

Page 4 of 4 FirstFirst 1234

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •