Can anyone tell me how high i can go while still keeping my memory at ddr2-800.
so far i have gotten up to 3.20 Ghz with a 16x multiplier and 1.400 V.
FYI.. my cpu is watercooled.
thanks
Can anyone tell me how high i can go while still keeping my memory at ddr2-800.
so far i have gotten up to 3.20 Ghz with a 16x multiplier and 1.400 V.
FYI.. my cpu is watercooled.
thanks
RiG1: Ryzen 7 1700 @4.0GHz 1.39V, Asus X370 Prime, G.Skill RipJaws 2x8GB 3200MHz CL14 Samsung B-die, TuL Vega 56 Stock, Samsung SS805 100GB SLC SDD (OS Drive) + 512GB Evo 850 SSD (2nd OS Drive) + 3TB Seagate + 1TB Seagate, BeQuiet PowerZone 1000W
RiG2: HTPC AMD A10-7850K APU, 2x8GB Kingstone HyperX 2400C12, AsRock FM2A88M Extreme4+, 128GB SSD + 640GB Samsung 7200, LG Blu-ray Recorder, Thermaltake BACH, Hiper 4M880 880W PSU
SmartPhone Samsung Galaxy S7 EDGE
XBONE paired with 55'' Samsung LED 3D TV
what you should do is set ur memory to ddr666 and push your FSB up a bit to find your max speed and use any mulitplier you want, it can reach any speed possible using mulitplier alone, it can do 4ghz+ if the cpu will let you, but im sure it wont
your reaching near the max of that cpu at those volts, i was able to get 3360 at 1.5v
AMD Athlon 64 x2 6000+ AM2 CCB8F 0740 FPMW
MSI K9A2 Platinum v1.2
4 x 1GB Corsair XMS2 (rev 5.1 and rev 5.2)
Zalman CNPS9700LED
PowerColor ATi HD 3870 512MB DDR4 256bit PCIe 2.0
Corsair TX750 Watts (12v @ 60A on a single rail)
80 GB WD SATA I (primary)
250 GB WD SATA II (backup)
Bookmarks