well i just walked in from being out tonight it 2 am here and i just did some mods to a brand new nf7 that i am going to test a new set of evaperators on.
set of 3 i hope.
anyways here a pic,notice the mounting studs for the small....chipset evap...O YEA you heard me right a chipset evap.
ok some more work going on.
making hold downs
getting ready to insulate blocks
Looking good my man.
baker18
insulation foam being applied in these molds
now i wait 24 hours on these 2 to cure before i can start cutting the foam.
i still have a GPU to do that one is tricky because hose and cap tube have to be all done at once.i will try and get something posted tonight on the baker GPU block ,by the way all the block's seen in here so far has been made by my friend baker18
Last edited by bowman1964; 08-03-2003 at 12:54 PM.
nice work.
damn, wish I had your hands
Dell XPS M1730 - X9000 @ 3400mhz-4096MB 667MHz DDR2 - M8800GTX SLI- 17"WUXGA+
EVGA E762 4Way SLI Classified - 980X @ 6Ghz Lnē 6GB Dominator - MSI 5870 Lightning
WWW.MADSHRIMPS.BE - Being Mad Doesn't Hertz You
well i promised a baker18 GPU tonight and here it is.pic is of bottom plate
next is GPU block after i had connected the cap tubing.and this is one i cannt get the cap tubing inside the suction line with out alot of trouble.it will more than handle and GPU heat load with ease.i still will wrap the cap tubing at the other end of the flex hose,at the suction manifold.
You make it look so easy
Making me wanna make my own sub -80 unit
damn bowman... Do you bench?
Heh put something out on southbridge too =D
Originally posted by shray
damn bowman... Do you bench?
Heh put something out on southbridge too =D
he doesnt have enough time
Bowman i got the copeland unit, its brand new and looks sexy :smileysex
yea i love to bench when i have time...Originally posted by shray
damn bowman... Do you bench?
Heh put something out on southbridge too =D
i got the supplies but not the time.
i have a IC7-G and a P4C800deluxe 2.6g that does 3.55 on air.,NF7 v.2.0.xp1700 that will go past 3.0g(I am borrowing) hyperx pc3500,and pc4000,and twinmoss bh5.
r9700 that does 500core,and a brand new r9800 i havent even touched yet.true power 550 and,pc power and cooling 510 power supplies.
not to speak about all the cooling i have.
it just takes time.
Last edited by bowman1964; 08-04-2003 at 01:09 PM.
I have plenty of time
Wanna sell that 1700+? lol
not mine i am borrowing it,that one reason i am working on this NF2 so to test the chip LOLOriginally posted by twiggy
I have plenty of time
Wanna sell that 1700+? lol
Nice to see someone playin with an AMD with this stuff... far too many Intel boys on phasechange n not enuff AMD Guyz!!
Trust me when I say that the 1700 chip bowman is "testing" is quite the gem...and I'll say no more!
yea i have spent a few dollars just to test this chip,new NF7 board,r9800.....i hope it is worth it LOL
o before i log off i got this much done late tonight on the triple evap setup on that AMD...LOL
since i am waiting on a new batch of driers i want to use on the 2 prommys i have here i have been using my time to catch up.
here is a pic.
i was testing the mounting of the blocks.
VERY NICE!
Very neat and clean looking setup Bro!
What kind of temps do you expect with all three evaps loaded? Any idea yet?
You've really outdone yourself.....again!
I hate to advocate drugs, alcohol, violence, or insanity to anyone, but they've always worked for me.
Hunter S. Thompson (1939 - 2005)
thanks bro....Originally posted by TheDude
VERY NICE!
Very neat and clean looking setup Bro!
What kind of temps do you expect with all three evaps loaded? Any idea yet?
You've really outdone yourself.....again!
well i am not finished with the block insualtion.i still like my boxed outer shell better.i will have to do some more research and designs before i will be happy,i am talking to a company now about aquiring some ceramic based high tech liquid insulation to try.i personal would like to find some of the material used in making pots and pans handles.this would be the best i believe if i can machine it to cover the blocks,but thats another story.
the temps..well i know the GPU i have tested down to -54f loaded and the cpu has gotten close to that.but this cpu is a newer a design i am testing so it is up in the air.chipset i just am trying to get around -10f or so.i think anycolder wont have a affect.
the cap tubes are all differant lenghts this time ranging from 100" to 180".
i should be able to crank it up i hope this weekend.
Originally posted by Amoeba Assassin
how much does the r404 upgrade cost for mach 1?
In Denmark it cost about 2000-2500 Dkr. thats 300-325 $
Its no big thing, just explane a cooling compagni, what you want them to do.
Best OC Regards
Tom Holck
Denmark
The Homeland of nVentiv and Asetek
300$ for a r404a conversion?!?Originally posted by Tom Holck
In Denmark it cost about 2000-2500 Dkr. thats 300-325 $
Its no big thing, just explane a cooling compagni, what you want them to do.
You've got to be kidding me.....
That expensive?!?
Mollov,
Runnin' a 700MHz SlotA Thunderbird...
HardwareSight.com Owner
well i did get the triple evaps connected tonight to the manifold,i have triple evac.and now pressurizing the new section overnight for leaks.
here is a pic
Wahoooo! That's crazy man!
I hate to advocate drugs, alcohol, violence, or insanity to anyone, but they've always worked for me.
Hunter S. Thompson (1939 - 2005)
wow, agreed. Gj!
well i thought i might give a update this morning on the triple evaperator,before i have to get off this pc at work this morning.
did start up the unit at 5am this morning since i went to bed at 1am i sometimes wonder if i am still sane..LOL
but unit runs real good other than i have to readjust the cap tubing and up the compressor to a larger one.the extra evap/cap tube for the chipset i added although it is very small and i used 180" of .028"cap tubing is pushing the compressor too hard to keep me in a 10hg of vacuum i like to have.
the entire system is running about -46c on all three evaperators.the chipset block is doing better than i expected.but i have to slow it down some.i will add a section of .026 to the exsisting tubing as close to the evap as i can.as i dont need -46c on the chipset,so adjusting i will do.
and i have a few more new condensor units i will build a new one i hope this weekend between the prommies i will be working on.parts for them should be here tommorow.
i was using a new 10,000btu @45f compressor and it did fine with 2 evaperators,but 3 was too much flow.
so i have 2 new 15,000btu @45f compressors here.i will take one and set it up on a condensor and get it running soon i hope.
Posting Permissions
Bookmarks