Some Super-Pi WR for testing...

[hipro5]

I was testing this RETAIL CPU of mine to see how it does as of stability/Mem Latency and things like that so to be ready for some 3D action...

I will not post my 1M bench coz you already know it....

Here are the benchies....I did them for reference for the upcoming resaults of our Japanise guys....












.....and some disscusion now...

Here is the way I did them....
Maxmem = 640
"Diagnostic mode" from msconfig
Largesystemcache = 1
Windows Priority = 38
System Cache = 384 - 384
NO VGA drivers and with a 8800GTS at 1280x1024
All settings where at "performance"
Vcore = ~ 2Volts (cpu-z couldn't "track it" all the times coz of the "diagnostic mode" I have used)
CopyWaze file = 1.01GB
HD with two partitions....One with the windows and one for files....
Placed the Super-Pi folder in the C: partition and the CopyWaza file in the D: partition
Before I started each bench, I copied the 1.01GB RAR file from D: to C: IN THE Super-Pi folder.....I waited till the HD led STOPS blinking and THEN I pressed the start botton of the Super-Pi....
Well this is my way of doing it but you could test it by your way (the guys with the QX9650s) ....


......and now let's talk about something.....

IF you take a look at this screenie made by some guy....



....and at this screenie I did at the SAME FREQUENCY and the SAME FSB/multi/ram frequency, we will see that we have a BIG difference....



.....you whould say that I have more "tight timings" on my rams right?....
Well OK....I have....but we where "both" going for "WRs" No?....Plus that I did it for reference...

Let's take a look again at the EXACT SAME BENCH with the EXACT SAME EVERYTHING NOW.....EVEN ram timmings.....

Here's the one of this guy....



.....and here's my other one.....



EXACT SAME SETTING EVERYWHERE (except bios settings and tweaks)...

....I've tested it EVEN with 2T instead of 1T which I was within bios to see the difference....


Here it is again with 1T within bios ...



.....and 2T within bios.....




We see the BIG difference that we have with ram timmings/etc in these benchies (at least the three ones at 5668MHz)....
At this point we see that we actually HAVE some difference between 1T and 2T......THOUGH NEITHER cpu-z NOR Meset reports it correctly and even if you put 1T into bios, both of these programs report it as "2T".....It must be fixed I think coz with the cpu-z V. 1.41 I had the readings of it OK.....
I putted 1T in bios and cpu-z 1.41, reported 1T.....I putted 2T into bios, and it correctly reported 2T....Frank do something about it please.....

That's it for now.....Thanks....


.

[antari]

Wow, very nice work, 32M @ 5800MHz. That's amazing.

[DMH]

And how about those 5960Mhz you talked about in the other thread??

[PcCI2iminal]

nice scores as always and love reading your threads!!

Did you repair the bios chip?

[hipro5]

And how about those 5960Mhz you talked about in the other thread??

I was bluffing for Vince.....

nice scores as always and love reading your threads!!

Did you repair the bios chip?

No.....NOW I flashed the 306 bios on this mobo and ....2 x mobos down....NO power up anymore.....
I have unsoldered the bios chip from my backup mobo and solder it on this mobo to work with the 204 bios.....Everything was fine and then I said to my self: Let's download again the 306 bios and try it....NO GO.....2 mobos down now....NO power up anymore....
I hope a friend could help me out by sending my an SPD programmer to flash it.....

[Enoc]

nice runs Hipro5...congrats for the WRS...like always very detailed threads...

but I think you missed something...you are running 1:2 , he's running 3:5 and 5:8...and you know 1:2 is the fastest divider for DDR3...run 3:5 and 5:8 and compare again

apples to apples...not oranges to apples...

32m is

[Planet]

nice runs Hipro5...congrats for the WRS...like always very detailed threads...

but I think you missed something...you are running 1:2 , he's running 3:5 and 5:8...and you know 1:2 is the fastest divider for DDR3...run 3:5 and 5:8 and compare again

apples to apples...not oranges to apples...

32m is

As well as diferent board and chipset

[hipro5]

nice runs Hipro5...congrats for the WRS...like always very detailed threads...

but I think you missed something...you are running 1:2 , he's running 3:5 and 5:8...and you know 1:2 is the fastest divider for DDR3...run 3:5 and 5:8 and compare again

apples to apples...not oranges to apples...

32m is

Oooouuuppsssss .......my bad M8.....
I'll re-run them ........
I though that he could run at 1:2 which is more obvious to run with....

As well as diferent board and chipset

Hmmm.....NOT quite right coz with the Blitz Extreme I get the SAME times +/- .....with the same settings....

[Enoc]

As well as diferent board and chipset

yeap...missed that one...X38 pownes P35...

[hipro5]

yeap...missed that one...X38 pownes P35...

I'll redo the 5668MHz once again with my Blitz Extreme.....

[VictorWang]

that's .... what can i say... damn damn damn fast and u are damn damn damn lucky ag.

[hipro5]

that's .... what can i say... damn damn damn fast and u are damn damn damn lucky ag.

Thanks Victor.....But for what I'm damn lucky exactly?....For having 2 x P5E3 WS Pro mobos down due to a bios flashing?....
I only have the Blitz Extreme now to play OR I HAVE to mod/insulate the P5E64 WS Pro one.....TOO much time to do so, but IF I don't find a way to flash my others ones, this will be the only way to play CF.....

[SeLecT]

Firstly congratulations for the world records!


Which Ram do you use? Cellshock?
And how high was the Vdimm?

[VictorWang]

lol, i have a programmer at hand with tons of functions and features.
but I dont have time to use it

u are damn lucky for such a good chip

btw, would u plz try ur fastest 4Ghz 32m on ur qx9650 with ddr3 ?
i think should break 9min55s .

[hipro5]

Firstly congratulations for the world records!

Which Ram do you use? Cellshock?
And how high was the Vdimm?

Thanks......and yes they are the CellShocks PC14400 at 2.35Vdimm....

lol, i have a programmer at hand with tons of functions and features.
but I dont have time to use it

u are damn lucky for such a good chip

btw, would u plz try ur fastest 4Ghz 32m on ur qx9650 with ddr3 ?
i think should break 9min55s .

Yes, I must confess that I'm a bit lucky with this CPU.....
Do you sell your programmer OR lent it for a couple of days with shipping costs on me?....

Yes, I will try it maybe tomorrow or the day after tomorrow.... Hmmmm......No, now that I remember, I could try it now....I'll take off the York from my "dead" P5E3 and place it in my default P5E64.....YES, I'll do it now....

[nachthymnen]

Fantastic runs as always!!!
32M is amazing!

[ent]

Congrats on a nice SPI WRs set hipro , when we will see some 3d?

[over@locker886]

Really great work Hipro5! Congratulations!

[Zeus]

Fantastic job mate, as usual i have to add.

Thanks for giving an insight on your SuperPi method, interesting that you're running without VGA driver installed, how much of a difference does that make?

Did you do some 1M runs other than that one we've seen?

[STEvil]

HiPro, most boards these days have a bootblock that will POST the board far enough to load a bios from a floppy (some need a cdrom or a usb drive to do it) and flash it.

I'm not sure of the specific way to do it on your board(s) though.

[VictorWang]

Yes, I must confess that I'm a bit lucky with this CPU.....
Do you sell your programmer OR lent it for a couple of days with shipping costs on me?....

Yes, I will try it maybe tomorrow or the day after tomorrow.... Hmmmm......No, now that I remember, I could try it now....I'll take off the York from my "dead" P5E3 and place it in my default P5E64.....YES, I'll do it now....

sure i can send to u, but... u need to understand chinese to know how it works

[eva2000]

woah very nice.. was expecting to see you post up your 8m 09s time but didn't make a showing in this thread ?

shame about bios flash issue.. why did Asus go with soldered on bioses..

[dinos22]

And how about those 5960Mhz you talked about in the other thread??

I was bluffing for Vince.....

MUHAHAHAH i just read this comment
ing gold right there



keep pushing hipro
we want to see sub 8m runs

[kiwi]

shame about bios flash issue.. why did Asus go with soldered on bioses..

It can hold more data

[M3kk]

Are you tried with two cores disabled yet?