yeah i found it i think its the usb 2.0 driver
cool thanks
yeah i found it i think its the usb 2.0 driver
cool thanks
FX-8350(1249PGT) @ 4.7ghz 1.452v, Swiftech H220x
Asus Crosshair Formula 5 Am3+ bios v1703
G.skill Trident X (2x4gb) ~1200mhz @ 10-12-12-31-46-2T @ 1.66v
MSI 7950 TwinFrozr *1100/1500* Cat.14.9
OCZ ZX 850w psu
Lian-Li Lancool K62
Samsung 830 128g
2 x 1TB Samsung SpinpointF3, 2T Samsung
Win7 Home 64bit
My Rig
With M3a32 mvp can I unlock core on Dual or triple core?
I believe you need the SB 750 or SB710 to unlock cores. The M3A32 has the SB600 ...
.
Opteron 180 @ 2.8 GHz || A8N32-SLI || 2x 1Gb Corsair 3500LL Pro || 7900 GTX || Tt 680W PurePower
MCP655 > Storm > MCW60 > 3/4" T-line > MCP655 > Storm (Opty 165) > 2-302 HC w/2x 140CFM Deltas
Latest Toy: 940BE || M3A32-MVP || Corsair TwinX2048-6400C4D || OCZ Stealth 600W
Thank's for reply
http://pc-overware.be/forum2/index.p...ic,3244.0.html
Vmod for M3A32 mvp deluxe
What is that for and what is the other end of the blue wire hooked to ...?
.
Opteron 180 @ 2.8 GHz || A8N32-SLI || 2x 1Gb Corsair 3500LL Pro || 7900 GTX || Tt 680W PurePower
MCP655 > Storm > MCW60 > 3/4" T-line > MCP655 > Storm (Opty 165) > 2-302 HC w/2x 140CFM Deltas
Latest Toy: 940BE || M3A32-MVP || Corsair TwinX2048-6400C4D || OCZ Stealth 600W
Doh! Didn't look close enough at the quiggles down there!
I figured it exceeded the board max vCore but, face it, that would only be good for extreme cooling. I run water with some of mine and won't go over 1.55v even with that. I'm just chicken! LOL!
.
Opteron 180 @ 2.8 GHz || A8N32-SLI || 2x 1Gb Corsair 3500LL Pro || 7900 GTX || Tt 680W PurePower
MCP655 > Storm > MCW60 > 3/4" T-line > MCP655 > Storm (Opty 165) > 2-302 HC w/2x 140CFM Deltas
Latest Toy: 940BE || M3A32-MVP || Corsair TwinX2048-6400C4D || OCZ Stealth 600W
Link says that for air cooling resistor should be 100kΩ. Obviously this mod should be for xtreme cooling or very brave ones...
It must be soldered a trimmer 50 ~ 100kOhm connect to ground on the blue wire,
This assembly is turning over 1.70v Vcore max to 2v
If u want test a processor under ln2 or cascade cooling you can make it
No bios for x6 phenom?
Not yet. ASUS hasn't gotten around to doing any of the M3 boards, AFAIK ...
.
Opteron 180 @ 2.8 GHz || A8N32-SLI || 2x 1Gb Corsair 3500LL Pro || 7900 GTX || Tt 680W PurePower
MCP655 > Storm > MCW60 > 3/4" T-line > MCP655 > Storm (Opty 165) > 2-302 HC w/2x 140CFM Deltas
Latest Toy: 940BE || M3A32-MVP || Corsair TwinX2048-6400C4D || OCZ Stealth 600W
Crosshair III Formula is 6 core ready... same series of motherboard (790fx)
Not all 790FX boards are the same ASUS series. ASUS has boards that are M3A series (AM2+) and boards that are M4A series (AM3) - both series have 790GX and 790FX chipsets. All the M4A boards I've looked at are now updated, the M3As are not updated as yet. The Crosshair III, being an AM3 board, is not the same series as M3A, which is an AM2+ board ...
Last edited by QuietIce; 05-03-2010 at 01:51 PM.
.
Opteron 180 @ 2.8 GHz || A8N32-SLI || 2x 1Gb Corsair 3500LL Pro || 7900 GTX || Tt 680W PurePower
MCP655 > Storm > MCW60 > 3/4" T-line > MCP655 > Storm (Opty 165) > 2-302 HC w/2x 140CFM Deltas
Latest Toy: 940BE || M3A32-MVP || Corsair TwinX2048-6400C4D || OCZ Stealth 600W
^^
What's the max fsb on M3A32 mvp?
Don't really know - never felt the need to test it. My board will go at least 260 'cause I've had it up that high but there was no reason to go farther. Once you get your RAM that close to 533 MHz using a 400 MHz RAM setting it's easier to change the setting and other multipliers than it is to continue increasing the clock ...
.
Opteron 180 @ 2.8 GHz || A8N32-SLI || 2x 1Gb Corsair 3500LL Pro || 7900 GTX || Tt 680W PurePower
MCP655 > Storm > MCW60 > 3/4" T-line > MCP655 > Storm (Opty 165) > 2-302 HC w/2x 140CFM Deltas
Latest Toy: 940BE || M3A32-MVP || Corsair TwinX2048-6400C4D || OCZ Stealth 600W
http://valid.canardpc.com/show_oc.php?id=1155536
my max fsb on M3A32
http://valid.canardpc.com/show_oc.php?id=1154841
Max ram and max cpu screen
Bookmarks