Page 5 of 27 FirstFirst ... 234567815 ... LastLast
Results 101 to 125 of 651

Thread: 32m SPi Low Clock Challenge

  1. #101

    fine tuning continued

    Proc freq: 3324.9 MHz
    Board : DFI DK P35
    Memory : Crucial Ballistix Tracer

    12.xx

  2. #102
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,393
    Time Zone: 8.XX
    CPU Model: Intel Core 2 Extreme QX9650 rev C0
    CPU Frequency: 5304.3MHz
    RAM Type: DDR3
    RAM Frequency: DDR3-1768
    RAM Timings: 6-5-5-16 1T
    SuperPi 32M Calculation Time: 8min 52s 718ms


  3. #103
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,393
    Time Zone: 14.XX
    CPU Model: Intel Core 2 Duo E8400
    CPU Frequency: 3002.1MHz
    RAM Type: DDR3
    RAM Frequency: DDR3-2000
    RAM Timings: 8-7-6-21 1T
    SuperPi 32M Calculation Time: 14min 53s 829ms

    No tweaks at all...untweaked hardware, not tweaked windows installation, untweaked run ( no copywaza, maxmem, etc )


  4. #104
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,468
    wow almost 900MHz 6-5-5-x from those Cellshocks
    nice RAM man
    what vdimm was that on?
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  5. #105
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,393
    Quote Originally Posted by dinos22 View Post
    wow almost 900MHz 6-5-5-x from those Cellshocks
    nice RAM man
    what vdimm was that on?
    ~2.29V.
    Guess what... they can do more than 900MHz 6-5-5-x SuperPi 32M & Memtest Error-Free ( 50 loops test #5 ).
    Unfortunately the CPU is a dud for DI/LN2...
    I had to settle down on clocks...

  6. #106
    Registered User
    Join Date
    Jan 2008
    Posts
    83
    12.xx time zone:

    e8400 @ 3.6ghz
    ddr2 @ 600mhz 5-5-4-12
    time: 12m 54.639sec


  7. #107
    KiSUS
    Join Date
    Nov 2006
    Location
    Russia / Moscow
    Posts
    576
    9.XX
    E8400@4500
    DDR3@1000 (7-6-6-16-1T)
    time: 9m 53.640sec
    Only basic tweaks.

    Lights, Music, Camera, Action !


  8. #108
    Registered User
    Join Date
    Apr 2005
    Location
    Belgrade,Serbia
    Posts
    36
    Setup :
    - C2D E8500@TRUE 120
    - DFI BloodIron
    - Crucial Ballistix PC8500@2.55v
    - SilverStone st560f

    10.xx


    13.xx


    Last edited by staxm; 04-14-2008 at 07:29 AM.
    Team Serbia

  9. #109
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,393
    3oh6 m8, you've some errors in the lists.
    The 13.xx time & 8.xx time by monteboy are linked to wrong posts/scores.

    Edit:
    The correct links:
    8.xx time - http://www.abload.de/img/e8500_5190_8_591024xk5b.jpg
    13.xx time - http://www.xtremesystems.org/forums/...&postcount=100
    Last edited by BenchZowner; 04-15-2008 at 05:51 AM.

  10. #110
    Registered User
    Join Date
    Apr 2005
    Location
    Belgrade,Serbia
    Posts
    36
    12.xx time zone:

    Team Serbia

  11. #111
    Xtreme Member
    Join Date
    May 2007
    Location
    France
    Posts
    156
    Just for fun ... 36GP 12.xxx with Conroe 2Mb


  12. #112
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,656
    Quote Originally Posted by BenchZowner View Post
    3oh6 m8, you've some errors in the lists.
    The 13.xx time & 8.xx time by monteboy are linked to wrong posts/scores.

    Edit:
    The correct links:
    8.xx time - http://www.abload.de/img/e8500_5190_8_591024xk5b.jpg
    13.xx time - http://www.xtremesystems.org/forums/...&postcount=100
    thanks for the heads up and leg work...will edit those with my next update in a bit.

    so for those hating on the 790i because some guys have been posting results without P1/P2 enabled, let the hating stop, 790i is officially as fast in SPi (32M at least and really, thats all that counts )...it might not be as fast at the exact same settings, but, the memory clocking abilities put it ahead of P35/X38. i will be getting my X48 board in a week or so but i don't anticipate the memory clocking skill of the 790i.

    here is the proof...now it doesn't register for anything, and it was a bit of a kick in the balls, but compare it to my 10.XX category leading frequency and you can see this setup is right there. BTW, i will have it in the 10.xx category at this frequency if it means not sleeping tonight...

    E8400 (L746A381) 7.5 x 531 (boot at 513)
    Thermalright Ultra-120 (CPU cooling)
    EVGA 790i (vDROOP mod)
    Corsair Dominator PC3-14400 (non-XMP)
    HIS HD3870X2 (drivers not installed)
    Seagate 7200.9 80GB SATA2 (10GB partition for OS/programs/page file)
    ERAM v2.11 (simply for copying the CW to)
    Silverstone Zeus ST56ZF 560W
    WinXP Pro SP2 (custom nLite'nd job)


    click for full size...


    now, the X48 i have on its way (P5E3-Premium) might be able to match this 531x7.5 1:2 at a nice tight PL, but my best P5K3-Dlx or Maximus Extreme sure as hell couldn't.
    Last edited by 3oh6; 04-16-2008 at 09:55 PM.

  13. #113
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,468
    ho ho ho ho ho
    what did i tell ya mate

    wait till you get a kit of RAM than can handle tighter tRFC

    that's a great time mate
    really great

    fingers crossed this new kit i'm getting will do some decent 7-6-x-x timings past 2GHz
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  14. #114
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,656
    Quote Originally Posted by dinos22 View Post
    ho ho ho ho ho
    what did i tell ya mate

    wait till you get a kit of RAM than can handle tighter tRFC

    that's a great time mate
    really great

    fingers crossed this new kit i'm getting will do some decent 7-6-x-x timings past 2GHz
    thanks buddy and yes you were absolutely correct, thanks for your thread convincing me of taking a chance on this board. it will be doing what it was meant to do in a short while (mmm 3D benching) but it also holds its own in 32M SPi.

    also, this kit will absolutely not do <65 tRFC at this frequency...at 1050MHz i got it to run 64 tRFC but 63 was a no-go. my other kit of Dominator 14400s didn't like tight tRFC in the Maximus Extreme either so i don't have high hopes for them on the 790i. my G.Skills were a bit better so if they clock like these Dom sticks then the G.Skills should pull this time down a bit more. speaking of which, before i could even finish my last post, the deed was done. 790i owns one of the top spots in the 32M challenge

    E8400 (L746A381) 7.5 x 531 (boot at 513)
    Thermalright Ultra-120 (CPU Cooling)
    EVGA 790i SLI Ultra
    Noctua NC-U6 // HR-05-SLI (SPP & MCP cooling)
    Corsair Dominator PC3-14400
    HIS HD3870X2 (drivers not installed)
    Seagate 7200.9 80GB SATA2 (10GB partition for OS/programs/page file)
    ERAM v2.11 (just to transfer CW file to)
    Silverstone Zeus ST56ZF 560W
    WinXP Pro SP2 (custom nLite'nd job)


    realtime / core 1
    maxmem = 615
    copywazza = 1GB (folders with 1MB file in each) from C:\ > Z:\ > C:\ > Z:\

    visual effects all off
    memory usage = "System cache"
    processor scheduling = "Programs"
    page file = default
    plenty of services disabled but not all


    3983.1MHz SPi 32M = 10m 59.969s
    click for full size including memset...

  15. #115
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,468
    i can run my corsair kit down to 54 tRFC
    guess it all depends on the board and kits

    i've seen a few people benchmark 7-7-7-x or 7-6-x-x- on 790i at 2GHz which is encouraging.............

    i reckon it's just going to need some more bios tweakin by engineers but once CAS7 and CAS6 clocks get up to speed Superpi times will tumble even more....you would definitely beat your old score in this category with CAS7 imo
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  16. #116
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,656
    Quote Originally Posted by dinos22 View Post
    i can run my corsair kit down to 54 tRFC
    guess it all depends on the board and kits
    must be that special hand picked ES board you got

    Quote Originally Posted by dinos22 View Post
    i've seen a few people benchmark 7-7-7-x or 7-6-x-x- on 790i at 2GHz which is encouraging.............

    i reckon it's just going to need some more bios tweakin by engineers but once CAS7 and CAS6 clocks get up to speed Superpi times will tumble even more....you would definitely beat your old score in this category with CAS7 imo
    yeah, 2000MHz at CL7 will be interesting to see on the 790i. as it stands, 500*8 1:2 8-7-6 is a few seconds slower on 790i than P35 at the same with tRD6 and even a few more yet than X38 at 500*8 1:2 7-7-6 tRD6. so clock for clock it isn't as fast, unless maybe with some nice 54 tRFC (thats jealousy talking).

    but...where it will pull ahead is at high FSB where we are limited to pretty much a single ratio like P35/X38/X48. the ability to tune memory clocks a bit better at 550FSB+ should give it the advantage there...hopefully.

  17. #117
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,468
    Quote Originally Posted by 3oh6 View Post
    must be that special hand picked ES board you got .
    hahah ........ bastard j/k
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  18. #118
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,656
    Quote Originally Posted by dinos22 View Post
    hahah ........ bastard j/k
    hehe, did you even catch my low blow in that 790i OC Report over at the 'other' place? If not, check the bottom of the specs post all referencing the discussion that went on over here about your 790i board.

  19. #119
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,468
    link?
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  20. #120

    dfi dk fine tuning continued


  21. #121

  22. #122
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,656
    alright before you post a hlaf dozen other scores ...please start including the memory tab, motherboard tab, and if at all possible the SPD tab. it helps identify your components and helps others out. thanks guy, and damn...hardest working guy in this thread, nice work

    i will update sometime after 5pm tomorrow...last final that i have to think for should be done then

  23. #123
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,393
    ^^ And disable SpeedStep as well

  24. #124
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,656
    Quote Originally Posted by BenchZowner View Post
    ^^ And disable SpeedStep as well
    who the what now? SpeedStep isn't on, he's benching at that multi.

  25. #125
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,393
    Quote Originally Posted by 3oh6 View Post
    who the what now? SpeedStep isn't on, he's benching at that multi.
    Not this bench.
    Some of his benches.

Page 5 of 27 FirstFirst ... 234567815 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •