32m SPi Low Clock Challenge

[DJSUB]

Time Zone: 12.xx Wolfdale
Proc Speed: 3325.22 MHz
Actual Time: 12.59.687s
Multiplier: 6 x 554
Ram Type: DDR2
Ram Speed: 1108 mhz
Ram Timings: 4-4-4-4
Divider: 1:1
Processor: Intel Core 2 Duo E8400
Chipset Used: P35
CPUZ Validation : http://valid.x86-secret.com/show_oc.php?id=316559



Pinoy Powah!

[hipro5]

Is this still up?......Just some tests with the new GSKILLs PC12800 (Micron D9GTR chips)

11.xx

[dduckquack]

Time Zone: 16.xx

still needs alot of improvements, but i guess for a memset/eram-less run it's not that bad


Actual Time: 16.58.625
Multiplier: 7 x 382
Proc Speed: 2681.16 MHz
Ram Type: DDR2
Ram Speed: 1149 MHz
Ram Timings: 4-4-4-4
Divider: 2:3
Processor: Intel E6600
Chipset used: P965
validation: http://valid.x86-secret.com/show_oc.php?id=320074

[DJSUB]

nice run dr.dum

[dduckquack]

thanks mastah :p

[Gautam]

Jody, how about a new category since 8 mins is the new 9 mins?

This one's not terribly difficult to beat (especially with a Wolfdale)...WinXP w/no maxmem tuned for 3D not Pi...

[3oh6]

Jody, how about a new category since 8 mins is the new 9 mins?

This one's not terribly difficult to beat (especially with a Wolfdale)...WinXP w/no maxmem tuned for 3D not Pi...

http://www-personal.umich.edu/~gautamb/32m.JPG

wow, Peter is really scraping the bottom of the barrel with who he sends stuff too huh?

8.XX is up but that time is definitely going to have to be improved...congrats on opening the sategory though. i was working on this very category the other day, just with the SS phase. i got down to 9m 09s @ 5031MHz but the BIOS went for shyt on the P5K3-Dlx and it won't even try to do a recover, just does the 5 second fan spin up and reboot loop. i was going to get some dry ice and get it done the next day but that obviously didn't happen. sooooo i am basically out of the game until the x48 boards become available, either that guy you have there or the DFI. i think i am breaking up with Asus for this next round and certainly not going to buy another P5K3 to replace this one.

unless someone has a P5K3 they would lend me so i can do a hotflash Hipro styles...and yes i am serious, i am more than qualified and capable of it

BTW, sorry for the late update guys. apparently there aren't e-mail updates so i missed the posts. i will have to keep an eye on this thread manually from now on.

[Gautam]

Damn damn that sucks to hear...kinda weird though that its totally bricked like that.

Come back and tell me if you can pull sub 9, sub 5300MHz if you're constrained to 450's-470's for FSB.

[3oh6]

Come back and tell me if you can pull sub 9, sub 5300MHz if you're constrained to 450's-470's for FSB.

haha, never in a million years. well maybe but it would be damn tough...thats what you get for playing the game with those fancy QX chips

as for the P5K3...yeah, stoopid thing. i bench for 2 days straight on the bleeding edge under the single stage then the next day i am just setting up on air for the dry ice run and after a reboot it says the BIOS needs to recover. it does its little auto recovery and flashes fine. reboots and now just the spin and reboot loop. the board was good to me though. its too bad the Maximus Extreme is useless for an E8400 and benching so i've got nothing until the new boards out. i have spent enough on P35/X38 thanks

[DJSUB]

Time Zone: 14.xx
Proc Speed: 2848.12 MHz
Actual Time: 14.59.953s
Multiplier: 6 x 474
Ram Type: DDR2
Ram Speed: 1138 mhz
Ram Timings: 4-4-4-4
Divider: 5:6
Processor: Intel Core 2 Duo E8400
Chipset Used: P35
CPUZ Validation : http://valid.x86-secret.com/show_oc.php?id=308579



Pinoy Powah!

[Rol-Co]

Working on some 32m too, why??.....because i'm suck at that

Intel E8500 wolfdale
Asus blitz extreme
ocz3fx1600 ddr3 6-6-6-18

11.xx



9.xx

[i found nemo]

lol my time is SO bad compared to your guys ... crap. oh well, it's good for single channel i think.

[3oh6]

i finally took the boots to the Dominators and managed a CL7 run...and finally got some time to run the 45nm. the K-squad has about 2 seconds on me at 4GHz flat so this frequency won't hold up but until i get a 7-6-6 kit of memory or the guts to go over 2.20v on the Doms...i am all but done here for this slot. going to play with higher FSB later but doubt it will be able to make up for the high memory clocks.

E8400 (L746A381) 8 x 498 (boot at 498)
Rosewill RCX-Z775-EX (CPU cooling)
Asus Maximus Xtreme (no mods)
Corsair Dominator PC3-14400
Biostar 8600GTS 512MB
Seagate 7200.9 80GB SATA2 (10GB partition for OS/programs/page file)
ERAM v2.11
Silverstone Zeus ST56ZF 560W
WinXP Pro SP2 (custom nLite'nd job)

realtime / core 1
maxmem = 600
copywazza = 1GB (folders with 1MB file in each) from C:\ > Z:\ > C:\ > Z:\

visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = C:\ = 512:512
plenty of services disabled but not all

3983.9MHz SPi 32M = 10m 59.188s
click for full size including memset...

[sobih25]

Nice job 3oh6 . my scores were smashed at ocx too. i haven't any good ddr3 atm unfortunately. i've tried pdp pc15000 today, but very unstable when higher clocked, not depends of mb - same on blitz/maximus .

[dinos22]

dominators love a good beating

go go go

[Gautam]

Kickass time

I actually can relate to not wanting to use much voltage this time around...with the Ballistix it didn't worry me to burn a set up biweekly or so since they were a dime a dozen.

I haven't even really been over 2.1v with DDR3 yet...just out of fear of how much time and money it'd take me to find a worthy replacement for the sticks I've got if I kill them.

Those Max Extremes all seem to have very nice northbridges for mem clocking.

[monteboy]

Good old Commando + E8500 + DDR2 Crucial Ballistix Tracer + SpiTweaker

11.xx


10.xx


9.xx


8.XX

[sobih25]

Monteboy, is your spi tweaker shared to everyone? . How can i find it?

[monteboy]

Monteboy, is your spi tweaker shared to everyone? . How can i find it?

coming soon .....

[dinos22]

hey Monte

i should be able to "catch" you with a Nvidia 790i board




Nvidia is coming good again

[monteboy]

hey Monte

i should be able to "catch" you with a Nvidia 790i board

Nvidia is coming good again

790i rocks !!!
I'am sure you can do it...

[andre X_X]

me join for 8.xx category

Old skull P5B Deluxe - bios 1224 + Monteboy P965 Strap Tweaker (thank you very much for this great software )
windows ex Maximus and P5E3 installation... tuned for 3d not for spi ... no maxmem used

System:
E8500 Q746A511
Crucial 10th Anniv 2gb kit
my CO2 Cascade
Silverstone OP 1000w

[andre X_X]

11.XX Category

not so good run ....

[andre X_X]

another run for 12.XX category....

[monteboy]

13.xx