32m SPi Low Clock Challenge

**Zeus** · 06-03-2009, 12:19 PM

Here is sub 18 minutes for the green team:

Specs in sig.

**kintaro** · 06-07-2009, 08:25 AM

12.xx
3259.9......kintaro..........12.59.422s......6x543 ...905.5mhz.....7-5-5-14....3/5..X48

**CryptiK** · 06-07-2009, 09:02 AM

11.xx

3900.1......CryptiK............11.58.140s.....7.5x 520....624Mhz.....5-5-5-15....5/6....P45

**TinTin** · 06-07-2009, 09:48 AM

7.xx

4378.1......TinTin............7.59.922s.....21x208 .5....1042.4mhz.....7-7-6-19....2/10..X58

**mdobem** · 06-09-2009, 05:13 PM

8.xx

4405.0......mdobem............8.36.427s.....21x209 .8..........839.1mhz.....8-8-8-24....2/8..X58

**alex_tpc** · 06-11-2009, 08:06 AM

updated 7.xx, 8.xx, and 9.xx entries with 2k+ cas 6 on the R2E

i7 920 D0 + Corsair Dominator GTs on R2E
vanilla Windows XP SP3 with most services off
waza 1.9GB C: --> D:, D:--->C:, C:--> D:on .bat file run from desktop shortcut

7.xx
4359.8......alex_tpc............7.59.641....21x207 ....1038mhz.....6-7-6-18....2/10..X58

btw, got the evga classified 760 recently. can't run those mems with 2K+ even with cas 7 or 8 with the same proc on the classified even with high vtt. my proc's imc is probably not good enough for the classified or (and?) the classified really sucks with high uncore or(and?) i haven't played with it enough. edit: turns out to be due to a bad dimm slot on the classified .

**TinTin** · 06-11-2009, 09:53 AM

Originally Posted by alex_tpc

updated 7.xx, 8.xx, and 9.xx entries with 2k+ cas 6 on the R2E

i7 920 D0 + Corsair Dominator GTs on R2E
vanilla Windows XP SP3 with most services off
waza 1.9GB C: --> D:, D:--->C:, C:--> D:on .bat file run from desktop shortcut

7.xx
4359.8......alex_tpc............7.59.641....21x207 ....1038mhz.....6-7-6-18....2/10..X58

8.xx
3842.6......alex_tpc............8.59.562....19x202 ....1011mhz.....6-7-6-18....2/10..X58

9.xx
3427.1......alex_tpc............9.59.922....17x201 ....1008mhz.....6-7-6-18....2/10..X58

btw, got the evga classified 760 recently. can't run those mems with 2K+ even with cas 7 or 8 with the same proc on the classified even with high vtt. my proc's imc is probably not good enough for the classified or (and?) the classified really sucks with high uncore or(and?) i haven't played with it enough. to think i was complaining about the r2e in my earlier posts (well it still sucks with high bclock/qpi: 222 is highest 32M stable I get on the r2e).

Really crazy CL6 over DDR3 2000

, how much Vdimm you used?

8.xx
3864.9.......TinTin............8.59.422....19x203. 4 ....1017mhz.....7-7-6-19....2/10..X58

**ToyTen** · 06-12-2009, 07:22 AM

Can't wait to get in the race again, really. I am expecting good memories and a proper cooling and i'll post. Because at the moment it is ridiculous

Good results over here

**3oh6** · 06-12-2009, 07:35 AM

alright guys, i think it is apparent i can't continue to update this thread. my year and a half is up doing so and it is time someone else took over. guys can't seem to follow the few simple things i ask for and i just don't have time to keep up with all of these entries. life is too busy for me right now and that isn't going to change any time soon.

so if you want to keep the the SPi Low-Clock Challenge alive, fire me a PM and i will give you a quick run-down on how to make it happen. only a couple simple steps really.

**ToyTen** · 06-12-2009, 07:58 AM

Hoping everthing is doing OK your side ! Even beter !!

Man, take care and please if you could, stay at the command

**Benji Tshi** · 06-12-2009, 08:58 AM

Alex_tpc > Amazing memory

What's this ? Sorted Hypers or...?

3oh6 > Sorry to hear you're leaving, i hope you'll find a good guy to replace you

**alex_tpc** · 06-12-2009, 07:24 PM

Originally Posted by TinTin

Really crazy CL6 over DDR3 2000

, how much Vdimm you used?

thnx. one.point.nine-ish

. stock dominator fans.

Originally Posted by Benji Tshi

Alex_tpc > Amazing memory

What's this ? Sorted Hypers or...?

sort of ... "Sorted" from two retail kits.

3oh6 > Sorry to hear you're leaving, i hope you'll find a good guy to replace you

ditto

**alex_tpc** · 06-12-2009, 07:30 PM

Originally Posted by 3oh6

guys can't seem to follow the few simple things i ask for

guilty as charged

. separating the posts to follow one score per post request from page 1.

8.xx
3842.6......alex_tpc............8.59.562....19x202 ....1011mhz.....6-7-6-18....2/10..X58

**alex_tpc** · 06-12-2009, 07:31 PM

[separating the posts to follow one score per post request from page 1]
9.xx
3427.1......alex_tpc............9.59.922....17x201 ....1008mhz.....6-7-6-18....2/10..X58

**TinTin** · 06-13-2009, 08:58 AM

8.xx
3848.1......TinTin............8.59.797....19x202.5 ....1012.6mhz.....7-7-6-19....2/10..X58

**CryptiK** · 06-14-2009, 04:32 AM

12.xx

3528.0......CryptiK............12.59.172.....7x504 ....604.8Mhz.....5-5-5-15....5/6....P45

**DJSUB** · 06-18-2009, 08:03 AM

i don't have money to buy good mems

this is the best i can do with the rated 1600mhz cas7 mems

7.xx
4419.8......DJSUB............7.58.703....21x210 ....1052mhz.....8-9-7-18....2/10..X58

**Hyperhorn** · 06-18-2009, 04:44 PM

Ok folks, I thought about it for a few days and had a nice alk with Jody and according to the fact that nobody else stepped up so far it`s my turn now. Fortunately I update many lists at other forums (partially for years), so I know how much work to expect. The reason I am into 32M and try to improve my efficiency also is helpful for sure.

I will try to do my job as good as Jody, because he really did a great job here.

I am sure you all agree at this point.
But something has to change, so prepare for the following steps:
- To update the thread regularly and use the edit function I have to create a new thread. I will copy & paste the rules, the results and the thread title, so basically nothing will change.
- ...except for the AMD part. The results are not linked and there are also no informations about memory details or chipset available atm. I will cancel this old part and create a new one for AMD results. It is the better solution for future results.
- Of course the newer results we have seen here and were not added to the list already will be added to the new one.

Any ideas or wishes? Just leave a message here, drop me a PN or even look at the contact info at my profile.

Regards,
Stephan

**George_o/c** · 06-19-2009, 01:53 PM

Stephan I know how hard Jody worked, I'm also involved with Greek SPi 32M LCC, basically the one who started it and keeps it clean

(you already know it I know

, I'm just saying

) I know how much work has to be done and in case you want some help, I'm prepared to help for sure. I'm a 100% in with what you mentioned about AMD list. If you want me to help you can discuss it with Jody and then find me on msn