I'm slowly working my way through guys... If you ordered a set and have not received them, please contact me with the details so that I can take care of it. I've had two lost (one of them found by usps) and one "undeliverable address" so far so I want to make sure everyone gets their set in a timely manner.
I am hoping to have a batch done for Petra's by the end of the week if all goes well.
iandh, if you're still able to make these after the holiday season, I'd definitely like to pick up a set.
I've sent you a PM as well.
If you can't make anymore, can you post up dimensions, blueprint, etc. for these so we can make them ourselves?
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
They have to receive them first before they can sell them.
I am hoping to complete the order they placed by the end of this weekend, and it is up to them from there to place them on the site. I will let everyone know when the order has shipped and then you can put the heat on...
Petra's Tech shop? Cool. Thanks guys (especially iandh)! Are they going to be listed in "RAMsinks, Mosfet Coolers, etc." under the "Air Cooling" section?
Last edited by Synomenon; 12-22-2007 at 02:02 AM.
will you distribute to the UK?
He's not selling them himself anymore...he's selling them through Petras (once they receive their order) so you'd have to ask Petras if they'll ship over seas. I think they will but you have to call them as the site isn't setup for international shipping as an option during checkout.
- Thermaltake Mozart-TX
- Corsair 620HX
- Gigabyte 965P-DQ6
- Intel C2D E6400
- 2 x 1GB G.Skill PC8000
- eVGA 7800GT CO 256mb
- 2 x 320GB Hitachi - RAID0
- DD TDX - CPU
- DD Maze4 - GPU
- DD Laing D5
- Black Ice 240mm RAD
cheers i'll give them an email.
I take it ianh resides in the U.S. so shipping charges would be similar.
forgot to say congrats ian
Chilled PC UK - Watercooling Parts, Any Custom work undertaken including Laser Cutting (any parts, grills, side panels, brackets etc), Anodising, Powdercoating , Custom Spraying and Airbrushing, Fabrication, Watercooling Installs and more all done to the highest standard.
International shipping no problem, even on Cases!
nice one, I'll keep an eye out cheers for the info
"Petra's Tech shop? Cool. Thanks guys (especially iandh)! Are they going to be listed in "RAMsinks, Mosfet Coolers, etc." under the "Air Cooling" section?"
most likely in the community section, like the waterkeg... good luck potential buyers and merry xmas to all...
For international shipping, just email qngo@petrastech.com with the items you want to get and you address and he will give you a quote with a few choices of shipping options. Just pay the total amount with the right shipping option and he will do it as asked, it's dead easy
I did the same myself to order 4 Yate SM fans to Canada and it's very easy.
I don't think they're going to put them on the site until next week. There's a note on their front page that they'll be out until Jan. 2.
As I know, 8800GT and 8800GTS 512mb are using the same PCB. So just want to be sure before I placed my order with Petras, this ram sinks will fit on 8800GTS 512mb (G92) right?
Thanks..
Thats what I understand also but I can't confirm that...
- Thermaltake Mozart-TX
- Corsair 620HX
- Gigabyte 965P-DQ6
- Intel C2D E6400
- 2 x 1GB G.Skill PC8000
- eVGA 7800GT CO 256mb
- 2 x 320GB Hitachi - RAID0
- DD TDX - CPU
- DD Maze4 - GPU
- DD Laing D5
- Black Ice 240mm RAD
I hope so too! I'm waiting on my card should arrive tomarrow I will post some pics. I don't want to epoxy heatsinsk to the mosfests as they seem to already be epoxied to a metal plate on the PCB...One came off on my GT card. Mixed epoxy works find for the memory I guess but mosfets are too fragile.
Oh well just another mistake I made and learned from. These will fit with a Low profile Maze4? if not I suppose I could always grind them down a little.
Enermax Liberty 620 Modular
Liquid Stacker
8GB G.Skill PC2 8800 5-5-5-15 @ 400MHZ (PC6400 Speed)
DFI LP LT X48-T2R
Liquid Cooling:
Thermochill PA 120.3 W/ Panaflo L1BXs/L1As
D5 andFuzion V2, DD MCP Universal
8800GTS G92
Intel Q9450 @3200MHZ @ 1.18v (Wont OC any higher despite voltage increases)
Yes, supposed to fit with any cooling gpu air/liquid cooling solution...besides a full card block obviously.
- Thermaltake Mozart-TX
- Corsair 620HX
- Gigabyte 965P-DQ6
- Intel C2D E6400
- 2 x 1GB G.Skill PC8000
- eVGA 7800GT CO 256mb
- 2 x 320GB Hitachi - RAID0
- DD TDX - CPU
- DD Maze4 - GPU
- DD Laing D5
- Black Ice 240mm RAD
Here is my new BFG GTS G92, looks similar only there is an extra set of 4 mosfets.
Here is my old BFG GT
So that said, Will these heatsinks work for the GTS and if so how do I get my hands on them so I can get my PC back together? I have no PC at the moment, just waiting for response so I can get these and put my video card in. I'll be away until next year but if you can let me know I'll purchase them as soon as I get back once I can get your confirmation.
Thanks and have a happy new year.
Last edited by Justintoxicated; 12-29-2007 at 11:38 AM.
Enermax Liberty 620 Modular
Liquid Stacker
8GB G.Skill PC2 8800 5-5-5-15 @ 400MHZ (PC6400 Speed)
DFI LP LT X48-T2R
Liquid Cooling:
Thermochill PA 120.3 W/ Panaflo L1BXs/L1As
D5 andFuzion V2, DD MCP Universal
8800GTS G92
Intel Q9450 @3200MHZ @ 1.18v (Wont OC any higher despite voltage increases)
Nice Work ~ Awesome !! check your pm box !!
Anyone know yet when Petra's will actually start selling iandh's custom sinks?
Bookmarks