Thumbs up for Dimastech

[Fr3ak]

After all the issues I read about phase change builders, I thought I would give some positive feedback of my latest purchase. A few months ago I decided to get a phase change unit and I must say I was very happy with the whole process.

Dimas from Dimastech built it and he had several very long discussions with me on MSN, because I had a lot of questions and he answered every single one of them, always trying to find the best solution for what I wanted to have.

The build itself took slightly longer than expected, but Dimas told me in advance, so it was not a problem. I was shown pictures of my unit during the build process, so I always knew the latest status. The unit made it from Italy to Germany without a single sratch or dent and works perfectly.

I would always get a unit from Dimastech again

[Sampsa]

After all the issues I read about phase change builders, I thought I would give some positive feedback of my latest purchase. A few months ago I decided to get a phase change unit and I must say I was very happy with the whole process.

Dimas from Dimastech built it and he had several very long discussions with me on MSN, because I had a lot of questions and he answered every single one of them, always trying to find the best solution for what I wanted to have.

The build itself took slightly longer than expected, but Dimas told me in advance, so it was not a problem. I was shown pictures of my unit during the build process, so I always knew the latest status. The unit made it from Italy to Germany without a single sratch or dent and works perfectly.

I would always get a unit from Dimastech again

Where are the pics of the unit? Performance? Test results?

[Fr3ak]

I made some crappy pics when I got it.
As for test results, I am still using my almost 2 year old E6600ES, which doesnt really do the unit justice. I am waiting for E8400 oe E8500 Some results are in this thread:
http://www.xtremesystems.org/forums/...d.php?t=164208

[before]

Looks very clean indeed

[Fujimitsu]

Nice looking unit, always like to hear about people's experiences with builders good or bad.

[Raja@ASUS]

Dimas and LittleDevil are probably 2 of the most reliable guys in europe for phase building. I have used the both, from benching tables, insulation materials and also cascade units...

regards
Raja

[Fr3ak]

Some more pics

[jinu117]

Good to see at least one happy news here
Great job Dimas
I hope we get to see more of this type of post here.

[bonzo_catalin]

+1 for Dimas , a very nice guy . And a skilled one too .

[Fr3ak]

One more update.

I tested the unit with a QX9650 yesterday and I was really impressed. CPU at 4700 - 5000 MHz depending on the benchmark at 1.65V and idle temp was -57.6C with a roomtemp of 14C. Under load the temp pretty much stayed below -49C. For the 06 CPU tests, temp still was -45C, which is pretty good I think for a single stage (all temps are evap temps).

[Don_Dan]

So that is the unit you used for the records with the Zotac 8600GT...

Very impressive!

[Oliver]

Dimas and LittleDevil are probably 2 of the most reliable guys in europe for phase building. I have used the both, from benching tables, insulation materials and also cascade units...

regards
Raja

I am also in contact with both of them and i can only say the things you have wroted again.

Both guys are really reliable.

Keep up the work guys.