Any suggestion on RAM...?

[Talisman]

I have Gigabyte GA-P35C DS3R mobo (check my sig)....can anyone suggest me the best ram for o'clocking (pc6400 is preferable). Thanks in advance guys...

[zanzabar]

crucial balistex one of thies kits

http://www.newegg.com/Product/Produc...+Gaming+Memory

[Nate P.]

crucial balistex one of thies kits

http://www.newegg.com/Product/Produc...+Gaming+Memory

+1. Or some CellShock or TeemXtreme kit.

[zsamz_]

you better of gettin pc8500s
p.s. carefull with voltage on the board
+3=2.2v-2.6v
+4=2.34v-2.37v
i think you would want to use 2.22 to 2.26v so get the balitix 8500s they are real cheap nowadays

[REVHEAD]

you better of gettin pc8500s
p.s. carefull with voltage on the board
+3=2.2v-2.6v
+4=2.34v-2.37v
i think you would want to use 2.22 to 2.26v so get the balitix 8500s they are real cheap nowadays

Ballistix

[Zeus]

There is a memory section on this board, please post in the appropriate section.

Another vote for Ballistix 8500.

[zanzabar]

balsistex 8500 is the wr ram for ddr2 if u go and look on the oc or bandwidth section forgot witch one it was posted in the last few days

[Krohling]

I also think the Ballistix are the ones who die less
I pray everyday mine don't die, like the OCZ Platinum I had.
Besides stated they support 2.2v for daily use, I have them 24/7 with only 2.00-2.05v @DDR2-1066.

With 2.05-2.100 they are capable of 1152MHz or maybe even 1200MHz with some serious tweaking.

[Zeus]

1200 with just 2.1V?? show me!

Just have a fan blowing over the rams, i can't stress enough how important this is for the lifespan of your memory, especially if you're gonna push some volts.

[Krohling]

I said maybe, 2.10v @1200MHz
I still get 1 or 2 memtest errors after 3 passes.

But in the thread about the Ballistix 8500 there's people with these rams clocked @1200 and 2.10v. Look here: http://www.xtremesystems.org/forums/...d.php?t=143009

I always have fan blowing on RAM no matter how much volts/FSB
They get very hot, easily, under stress.

[terroristone]

whats wrong with the ocz pc2 9200 flex, check my sig they are working well, but they are my second set .
Andrew

[Zeus]

I've been through that thread but did not see anyone getting 1200 with 2.1V, not even loc.o who has a very very nice kit.

Doesn't really matter, it's just that these Ballistix seem to be clocking rather nice.

[Talisman]

Thanks guys....!!! I'll go with 1 of them from the link that Zanzabar gave me...

[Krohling]

I've been through that thread but did not see anyone getting 1200 with 2.1V, not even loc.o who has a very very nice kit.

Here you go: http://www.xtremesystems.org/forums/...&postcount=275
Doesn't say if its stable though... There's another guy with a 1200MHz @1.95v screenshot too. Also doesn't say if it's stable.

Doesn't really matter, it's just that these Ballistix seem to be clocking rather nice.

Agreed.

With how much volts do you guys think it's safe to run the Ballistix 24/7

I'm currently running with 2.00v @1052MHz
It's set to 2.00v (+0.20v) at BIOS and Easytune Pro, but reported as 2.06v in Everest/Speedfan. I always get the vdimm reading +0.06v higher.

[Zeus]

Hehe, ok, 5-5-5 i take for granted, all ballistix will do 1200 5-5-5 with max 2.5V i think.

I was looking for 4-4-4 results.