GAMERS overclock intel STABILTY comp!!ALL enter plz!

[T_M]

r41Lm347:
so u just run benchmarks?u dont overclok your pc and actually use it for games or apps(fun stuff)?u have to turn it down im sure to run anything besides benchmarks to show ppl screenies..

T_M:
I overclock to benchmark, and i surf the net.
Thats all i do.
I used to game competatively back in the s939 days, with my OC rig, but these day my precious little time is spent benching. To me that is fun stuff so i think you should be careful what you say about other peoples hobbies

r41Lm347:
amazing hobby

T_M:
How does it differ from gaming?
Sitting at a computer, testing your skill against others, taking enjoyment from what you are doing, testing new techniques and sharing your knowledge, accomplishing personal targets..... the list goes on.

Can you please take this to your thread, not PM

[railmeat]

Heres is your 4gb 3.6g test you wanted, its what I run 24/7 for months anyway so no big deal, enjoy.



Takes minor knowledge or skill to run stability ocs, hence why we bench. If you have a better chip and know what you are doing, you have a better 24/7 oc, simple as that. At XS most people dont care what speed you play your games at. The real skill is in optimizing every piece of hardware at once, customizing the system for each bench, searching for the top clocking hardware and going through loads of it, voltage mods and figuring them out, running every different os to find that ms, etc.

People take it seriously whether it to be to try for that WR or a personal best so I dont see how you can downplay extreme benching saying stability testing is the true skill. That's simply BS.

Here is a challenge for you now. I ran this 1M, few tweaks, nothing serious and there are MUCH faster runs out there. Keep your clocks within 3610 and run one faster.

"Takes minor knowledge or skill to run stability ocs, hence why we bench."

minor knowledge ??ok get 4ghz 24\7 stable then?til then theres nothing minor about it or your chip cant do it .
or mabye your 24\7 cooling wont keep up with 4 gig stable but a quickie fill with a tube for that is "pro level" then i guess.if my current water or future phase unit cant do it stable im not gonna poor ln2 on it,lol.


"so I dont see how you can downplay extreme benching saying stability testing is the true skill. That's simply BS."

again dude wack 4ghz 24\7 stable,if not then your skill level is the same as mine at both 3.6ghz(me,u).and i dont live to overclock,i set it,stabilize and actually use it for MANY things.i honestly thought u could have wacked atlest 3.8-4ghz stable for me compared to my "minor knowledge" 3.6 clock. but you probaly dumped a ton of ln2 on your 3.6 run anyway(i would never know)as i run mere water and its flawless with my minor skill level.i got my o\c in 1-2 days without even trying to be honest.i just needed more ppl to post there chips at thee highest o\c possible on not without using"refillable cooling"thats not realistic for a real 24\7 stable rig.air,water,phaseprove there valor to make your 24\7 rig very fast and STABLE.there was a thread with some guys running conroes at 4ghz stable 24\7 rigs(lost the thread).anyway it was simply amazing to see such performance and actually being to use and harness the power with 0 maitence.

anyway eldonko thats a nice 24\7 stable o\c u got there....assuming done on air,water,or phase.

@ T_M
i had a question privately for your point of view,you wanna post it public here np,sorry to hear your mailbox is to full and felt the need to bring it here...w\e.any screenies of stable clocks.o ya stabilty aint your thing ,sorry.if not a quickie screenie of a tube run wont impress in this particular thread base.

[railmeat]

I find the originator of this thread annoyingly ammusing.

#1 - you come across as one of those 13 yr olds i used to play COD against, whose every word was 1337 speak BS.
#2 - you seem to be insulting those of us who consider benching to be most important
#3 - i dont appreciate being PM'd because of my response to a poll that didnt agree with yours. Anything you have to say on the topic could have been said here for all to see.

g@m3r 4 l1f3! = 13 yr old gaymer

Oh and with respect to your challenge, 3.6GHz is a walk in the park especially on water and C2D. But im sorry i dont want to waste hours of my time (yes, more than 1 because ill have to test many speeds) proving something that to me is pointless (i dont need a "stable" system)

"#3 - i dont appreciate being PM'd because of my response to a poll that didnt agree with yours"

i privately asked your point of view and reason thats all,pour some ln2 on your head and cool down man.i know why u brought my pm here,for others to agree with you and attack me by defending u or something.i wanted to know why you only benchmark nothing more.RELAX,thats why it was a pm oringinally...im the 13 yr old?hmmm %88 of ppl(your peers)agreed with my same mindset in the poll,.attack 69other ppl in here who think stabilty and speed are #1.there only opinions,hence a poll.but the majority says a stable pc is #1..no biggie.



"(i dont need a "stable" system)"

ya who needs stabilty,hence the thread,sorry but gotta laff. me and %87 of ppl HERE see different.to each there own i suppose but seems there is a such thing as a EXTREME stable system by the votes counted.

man cant we just have 1 thread for extreme stable conroes etc..when i get phase so0n i can go to 4ghz.my 3.6 on water is pleasing for now cause its stable.after say 4 gig on phase is stable i wont need any higher cause then i would have to fill it up every 5 min for faster...blahhh but then 45nm will perform higher on phase with 0 maitence.cant wait

[greek420]

just did some messin around with volts for what i concider stable. now mind u stable is more that just 10 sec.......... . stable 4 me is min of one hr prime or occt followed by all the 3dmarks back to back for two hours some super pi and gaming for hours at a time ...................

[/IMG]IMG]http://i220.photobucket.com/albums/dd167/yiacas420/361m32msppi-1.jpg[/IMG]

both of these prime, 3dmark 2+ hrs, and hours of gamin. without stabillity you have nothing except a meltdown waiting to happen. is it true???????????? that all benchmarkers have stock in tylenol for the headpounding after u fry power mosf 1.7 +vlts ram cooked at 2.6 to 4.1 volts ...................if thats ur thing god bless u all i just can not justify throwing $$$$$$$$$ away for one hell of a glory run. again that is just my opp, if that is ur thing more power to u

[greek420]

to railmeat love the set up looks good bro and it looks like it is set up nice for all day use, again good job do not lett anybody tell u diff that is a nice oc i read that u were wondering about a quad 6600 go well here u go bro at 3.6

here is my q6600 go @ 3.6 1.5 volts vcore
biostar 965
8800 gtx with no overclock on vid card
2 gigs flex ocz @ 800 4-4-4-12
rap 150 hd
enermax 1000 psu
custom built watercooling in stacker 830

[greek420]

My E6400 runs at 3.6GHz very stable but it and my motherboard generate far too much heat for me to feel comfortable with it (literally, it makes my room too hot) at this setting 24/7.

I could run water cooling although the extra heat would still need to be removed. Not to mention the difference between 3.6 and 3.2 is only perceptible in benchmarks and I use my computer for a lot more than just benchmarks.

And so I run at 3.2GHz stable nice and cool 24/7.

thats the truth both are nice oc .. u hit the nail on the head unless u use extreme cooling it does not matter how cold the cpu is if the rest of ure parts are on fire and faling
i have had many stable oc tested with my 6800 3.3 on stk vlts. 3.5 @ 1.35, 3.6 @ 1.42, and 3.7 @ 1.45 i even tested 3.8,3.9, and 4 gig ...
but like u said heat plays a major part in what i consider to be a safe 24/7 oc,
because it does not matter how good ur water or air is if the amb room temp is high ur temps will all be high
bro great oc and enjoy that rig u have and do not let anybody tell u otherwise

[T_M]

minor knowledge ??ok get 4ghz 24\7 stable then?til then theres nothing minor about it or your chip cant do it .
or mabye your 24\7 cooling wont keep up with 4 gig stable but a quickie fill with a tube for that is "pro level" then i guess.if my current water or future phase unit cant do it stable im not gonna poor ln2 on it,lol.

http://www.hwbot.org/result.do?resultId=643594
On air "lol"
(and yes, i'm prepared to be told that wPrime 1024M isn't 24/7 aka "1 hour OCCT stable", but it doesnt take much imagination to think what my 1hr OCCT clock might be )

your skill level is the same as mine

I dont think there's much threat of that.
Besides, Eldonko probably set it at 3.6GHz first pop just to show you how easy it was.

im the 13 yr old?hmmm %88 of ppl(your peers)agreed with my same mindset in the poll,.attack 69other ppl in here who think stabilty and speed are #1

I never said anything about the thread topic reminding me of a 13 yr old. Just you.

[railmeat]

http://www.hwbot.org/result.do?resultId=643594
On air "lol"
(and yes, i'm prepared to be told that wPrime 1024M isn't 24/7 aka "1 hour OCCT stable", but it doesnt take much imagination to think what my 1hr OCCT clock might be )



I dont think there's much threat of that.
Besides, Eldonko probably set it at 3.6GHz first pop just to show you how easy it was.



I never said anything about the thread topic reminding me of a 13 yr oldJust you.

plz dont call me a 13yr old(name calling is for 13yr olds) back on subject now...u got a occt run to post?


eldonko,heres a quickie pi run at 3.7...for 3.8-4.0ghz+ i need phase for comfortable temps\volts....so0n

[greek420]

E6300@3500 with only 1.35v


stability counts much more than speed for me.
well, in fact a stable system is always faster than an unstable one

great setup that is a nice overclock i hope u r enjoying that set up. my quad 6600 has 3.6 @ 9 x400 and 3.5 @ 8 x 438 tested but i like to run mine at 3.33 for the simple reason a lot less volts and stress on all the parts. great voltz by the way c2d were all nice on volts for stab. keep up the good work

[greek420]

this is for all the pros like i said before if electifying ur stuf is ur thing good for u more power to u just remember alot of these kids take a lot of pride in there rigs and read all the threads on this site for help, because of what people like u and i write and show our pics , so let them know that xtreme oc is not for everyone and we shouldn't put people down if they dont hit 4.0 to 7gig stable........... o i forgot who cares if is stable just kill your parts and go buy more and do it again

[railmeat]

this is for all the pros like i said before if electifying ur stuf is ur thing good for u more power to u just remember alot of these kids take a lot of pride in there rigs and read all the threads on this site for help, because of what people like u and i write and show our pics , so let them know that xtreme oc is not for everyone and we shouldn't put people down if they dont hit 4.0 to 7gig stable........... o i forgot who cares if is stable just kill your parts and go buy more and do it again

lol,"electifying ur stuf"lol

looks like u got a real nice setup there.q6600 at 3.6 24\7 is real nice.this thread actually serverd its purpose i think now because after seeing your almost Identical setup as me and wack 13k in 3dmark06 score with a stock 8800gtx im gonna grab a q6600 if the amd quads dont show any better results.thanks for your screenies.this is pretty much all i wanted.i know these chips go alot higher by pouring ln2\dice on em,but unfortunatly there not stable 1 bit so to me there useless.as were that q6600 at 3.6 is looking really rock solid,again ty.

i really would have liked to seen the 24\7 phase guys post here as well,cause this winter i think im in the market for a phase setup and would have liked to see some good STABLE baselines for everyday monsters,or i might just chill my water a lil bit.

im also very shocked to see %87 of ppl would rather have a stable and fast pc over a mindblistering tubed temporary setup.hmm nice results in the poll that i will never forget,the names and numbers dont lie about how ppl really feel.

benchzoner:
u voted twice in 2 totally seperate options,lol?dont matter u still chose stable and fast as 1 of your 2,heh.

[Northwood]

no time to take screenie (work soon) but e6750 @ 3.8Ghz is stable on water for 60 mins.

[hersounds]

well this time E4300 with custom (1h) OCCT

* is air cooling and here in Bs. As ( argentina ) is the f---ing spring and the temps sucks!





Orthos

[railmeat]

well this time E4300 with custom (1h) OCCT

* is air cooling and here in Bs. As ( argentina ) is the f---ing spring and the temps sucks!





Orthos

hersounds,thats a VERY good e4300 @ 3.5


@northwo0d!!

can,t wait to see your e6750 @ 3.8Ghz stable on water 60 mins screenies

thread back on baseline,ty... ppl still voting in the polls and i see "stabilty AND speed are #1" votes are at %89.36, very interesting.

[day187]

Been running 3.8Ghz for a 3-4 weeks with no probs at all.




By day187

[railmeat]

Been running 3.8Ghz for a 3-4 weeks with no probs at all.




By day187

back on topic(nice)....dude that is awesome!! 3.8x4 24\7 wo0t!!i see your running water!!

[an0nym0us]

wow !!!!!!!! ty jimmy,incredible box u got there on phase,so thats maietence free insane overclocks 24\7....467x9 w 1.45!again ty jim.this is all i wanted from ppl.these are REAListic overclocks because they can be used for more then 9sec..

keep em coming ppl. all 3.2 - 4.0ghz+ stable screenies welcome =)

i have no screenies, but my E6300 was stable 3.36ghz (480x7) and my current E6400 is stable at 3.52ghz (440x8) both 24/7 100% load on both cores (i crunch with XS WCG.)

[Fujimitsu]

Since when was everyone on this forum 15? jesus stop with the trolling and speak english.

Been running my e6300 @ 3.58 for months now on a zalman 9500, I'll run occt when I get home I usually use Orthos.

[The_Beast]

stabilty AND speed are #1

[railmeat]

stabilty AND speed are #1

yes agree %1,000,quick benchies are cool and all but not relaistic.speed is nothing without reliable stabilty .%89 of ppl of agree with you

[STEvil]

I like to watch both the 24 Hour Le Mans, the Dakar, and Top Fuel/Funny Cars..

Among many other off road racing types/races as well...

As such, learning to see the worth behind both a real stability program (Distributed Computing, World Community Grid specifically for me) and real tests of man & machine (S-Pi, 3Dmark) is not hard.

Both are tests which one person or another may find more appealing than another and calling one less than another only shows ignorance to the knowledge of what one must do to perform well in one or the other.


Please watch your language railmeat.

[Vapor]

Railmeat....I'd also like to extend my hand and say, "Welcome to the club."

You're the only member of said club and the advantages of being in the club are that you're officially warned to stop trolling. The thread is an obvious attempt to stir the pot.

I'm putting the lid on it.