Quad Core OC Database

**ocZZZ** · 09-05-2007, 04:38 AM

Q6600 G0
L723A963
3.6ghz @ 1.475v (bios) 1.472v (real)
Asus P5K Premium
Tuniq Tower

**The Nemesis** · 09-05-2007, 05:24 AM

I'd rather the 3.3Ghz prime stable be listed than the 3.6Ghz 32mb Pi.....

**TinTin** · 09-05-2007, 05:27 AM

1) Q6600 G0
2) L724A784 Pack Date: 7/13/2007
3) WaterCooling: Black Ice GT Extreme, Vortex XP(FuZion), D5
4) 445X9, 1.62V Dual Ortho small FFT 30mins.
5) Asus P5K Premium BIOS 204

**sobol** · 09-05-2007, 05:48 AM

1) Q6600 G0
2) L720B013 Pack Date: 07/31/2007
3) Screen shot below
4) Screen shot below
5) ThermalRight 120 Ultra Extreme + MOD + S-FLEX SFF21E
6) 1.375v bios, 1.368v windows
7) Asus P5K Deluxe, Bios 0404

This one max stable is 3400mhz. It won't do even 3450 mhz (BSOD).

**CraptacularOne** · 09-05-2007, 06:39 AM

List updated

@ The Nemesis, request taken

Keep posting guys

**phelan1777** · 09-05-2007, 06:43 AM

Will post my QX6700 shortly,

I also have a 3220, which is Qcore, taken results for that as well?

(more info to follow)

**CraptacularOne** · 09-05-2007, 07:33 AM

Originally Posted by phelan1777

Will post my QX6700 shortly,

I also have a 3220, which is Qcore, taken results for that as well?

(more info to follow)

If it's got four cores, I'll take it

Just give me the usual specs and I'll put it up there

**[XC] 4X4N** · 09-05-2007, 08:01 AM

Was just looking at the data base, looking good

Sorry I forgot motherboard. It's the gigabyte DS3-R in my sig.

**CraptacularOne** · 09-05-2007, 09:27 AM

Originally Posted by [XC] 4X4N

Was just looking at the data base, looking good

Sorry I forgot motherboard. It's the gigabyte DS3-R in my sig.

Thanks

**CraptacularOne** · 09-05-2007, 03:04 PM

anyone else?

**dragonhunter** · 09-05-2007, 04:37 PM

Why is PI can be use as stability and Folding can't?
Folding uses all 4 cores and PI only use 1 core.
Just a thought......

**Xiphias-Gladius** · 09-05-2007, 05:45 PM

Ok, here's mine:

Q6600 G0 @ 3700 1,44V (9x412)
L719B272
Gigabyte P35 DS4
Swiftech Storm G4 Rev2

**GripS** · 09-05-2007, 05:54 PM

Q6600 @ 3.4ghz with 1.4v BIOS 1.37v load
Batch: L724A760 VID: 1.2875
DFI Infinity P965-S
Scythe Infinity with 2x120mm fans in push/pull

Stable:

Suicide:

**CraptacularOne** · 09-05-2007, 07:54 PM

OK folks, I am going to change the 32m Pi requirement to a quad instance as that should help

List up dated

@ BND|MOD & yobi, please submit a quad instance of 32m Pi and I will remove the disclaimer next to your results

....or better yet a Prime stable screenie

**no_n|ck** · 09-06-2007, 08:43 AM

update;

3850Mhz@1.52v (same vcore as for 3800Mhz), 2h Prime95 pass..

It passed 30min Prime @ 3910Mhz at this voltage, but one core craped out on 44min, wich i dont considerd it stable..

**CraptacularOne** · 09-06-2007, 10:03 AM

Originally Posted by no_n|ck

update;

3850Mhz@1.52v (same vcore as for 3800Mhz), 2h Prime95 pass..

It passed 30min Prime @ 3910Mhz at this voltage, but one core craped out on 44min, wich i dont considerd it stable..

updated for you

And I thank you for your honesty

**CraptacularOne** · 09-06-2007, 05:15 PM

c'mon guys let's get some more results posted

**RLM** · 09-06-2007, 05:56 PM

I don't have this chip anymore. Still trying to dig out the full stepping, but it was L724Axxx

These two runs I've dug up are on different kit. An Abit IP35 pro and a DFI P35-T2R. Hopefully of use.

Q6600 GO 423x9 (3.8 ghz) Mem 1016mhz 4-4-4-12 Prime Blend Test

I had a L723B, but didn't hold on to it long enough for any serious testing.

Currently have a L723A365. Haven't a clue about this chip. Looking forward to checking it out.

RLM

**noobzed** · 09-06-2007, 05:59 PM

possible to add fsb and ratio in database ?

**crossg** · 09-06-2007, 07:01 PM

Q6600 G0 726A850 @ 3816
1.5250 vcore Bios / 1.4960 Actual
TRUE Lapped.
http://valid.x86-secret.com/show_oc.php?id=239384

Prime95 Large FFT 3 hours 20 min. Click

**CraptacularOne** · 09-06-2007, 07:48 PM

Originally Posted by noobzed

possible to add fsb and ratio in database ?

Sure, but so far everyone has used the stock multi (except me with my QX6700) that their CPU comes with, so there's no need. But this thread isn't about max FSB of a chip, but about the max stable operating speed they can achieve. The motherboard is the determining factor in the highest potential FSB a chip can get to. My board can only do a little more than 450Mhz FSB
http://valid.x86-secret.com/show_oc.php?id=239025
And I am 100% certain that if put this chip in a P35 board that I will be able to attain a higher FSB, but my chips max stable speed is only 3.9Ghz (434x9) and that I can attain that on my current board.

And list updated again, we can already see a patern forming with the L726A chips on this table so keep those results coming

**nugzo** · 09-06-2007, 09:55 PM

I didn't use stock multi. I use 8 on all of my quads.

**zodduska** · 09-07-2007, 01:54 PM

(duping my post from the other db thread)

my 24/7 oc:

Q6600 B3 L645G523
3.4ghz (425x8 1.44v)
Evga 680i NF68-A1(570)
Thermalright Ultra 120 Extreme

10+ hour p95 large fft, 11+ hour p95 small fft stable, 23 hour xvid DEcode loop

before I RMA'd this mobo it was fully stable except xvid would lock, now it's all good

valid: http://valid.x86-secret.com/show_oc.php?id=239739

now for a little stability contrast, same cpu:
32m super pi, 3dmark06 stable 3.7ghz

**doom_st** · 09-08-2007, 01:19 AM

1) Q6700 ES (G0)
2) L713A358
3) http://valid.x86-secret.com/show_oc.php?id=239884
4)
Prime 95 (Blend)8h+

5) PC
6) 1.52
7) Abit IP35 PRO

aspms* · 09-08-2007, 01:52 AM

Originally Posted by doom_st

1) Q6700 ES (G0)
2) L713A358
3) http://valid.x86-secret.com/show_oc.php?id=239884
4)
Prime 95 (Blend)8h+

5) PC
6) 1.52
7) Abit IP35 PRO

Impressive

I guess it's reached using vapo- right?

Thread: Quad Core OC Database

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions