Quad Core OC Database

[doom_st]

no custom phase build by me&unseen

[CraptacularOne]

List updated

[drynyks]

Look at the Ballistix go! 24/7 overclock 15 hours prime stable

1. Q6600 G0
2. L727A934
3. Screenshot below
4. Screenshot below
5. Water Cooling
6. 1.425bios 1.4windows
7. P5b Deluxe

[CraptacularOne]

drynyks, what water block are you using? Nice result too

[drynyks]

Thanks CraptacularOne. I could squeeze more out of it for certain but this is where it's staying for now. I am using a D-Tek FuZion.

[CraptacularOne]

Thanks CraptacularOne. I could squeeze more out of it for certain but this is where it's staying for now. I am using a D-Tek FuZion.

Well a 3.6Ghz quad isn't exactly "slow" by any stretch of the imagination When you do decide to push higher post it up and update your results

[virtualrain]

Here's my latest...

X3220 B3 - L640F058 - 3.6Ghz P stable - Apogee GTX - 1.6v DFI 680i - by --------------VirtualRain

Thankfully I have good cooling because the Vcore required for Prime stability is Xtreme (1.6V idle drooping to 1.55V load)!

[mjb1206]

How about some stable overclocks?? Everything posted has minimal Orthos / Prime95 runs, which basically anyone can do! Plenty posts with 2-min., 5-min., 10-min., 20-min. runs, lets see some real stable overclocks.

How about some 6-12 hour Orthos / Prime95 stability run................... Come on guys show off what ya got!!

[sofarfrome]

Xeon X3210 Go
Week - L723A
3.8GHz validation
WC rig in sig
Voltage = 1.42vcore
Asus P5K Premium

There is a lot more left in it too. I have been working on 3.8GHz at 1.47vcore

[sergmann]

Super Pi



24/7 Settings

[sam95ta]

Drynyks great overclock.I also have a p5b,wondering what you have northbridge set at.Have you hit a wall at anything over 404fsb like I have.Thinking of upgrading to a p35 or x38.

[noobzed]

you all have great q66 g0 mine want 1,48 to do 450x8 .... think i gat a bad cpu..

strange thing also coretemp always show me wrong freq but C1E is disabled..

[no_n|ck]

you all have great q66 g0 mine want 1,48 to do 450x8 .... think i gat a bad cpu..

strange thing also coretemp always show me wrong freq but C1E is disabled..

its still 50% overclock!
btw, coretemp is showing wrong freq, if the multi isnt set to 9×..

[CraptacularOne]

List updated

@ sergmann, I'm going to need your week (FPO Batch #) to make your result useful

@virtualrain, very helpful posting in the format I keep the table in simple copy and paste

[drynyks]

How about some stable overclocks?? Everything posted has minimal Orthos / Prime95 runs, which basically anyone can do! Plenty posts with 2-min., 5-min., 10-min., 20-min. runs, lets see some real stable overclocks.

5 posts above you saying this is mine which is 15hours prime.

Here's my latest...

X3220 B3 - L640F058 - 3.6Ghz P stable - Apogee GTX - 1.6v DFI 680i - by --------------VirtualRain

virtualrain try running your prime with small FFT's. That is best for testing processor stability with Prime95.

Drynyks great overclock.I also have a p5b,wondering what you have northbridge set at.Have you hit a wall at anything over 404fsb like I have.Thinking of upgrading to a p35 or x38.

Thanks sam95ta. You know I played with my overclock a bit more and I have previously done 10hours prime at 405 with this board but it looks near the max. I am sort of burnt on messing with it but I'm sure I'll be playing with it more.
My settings in bios are:

CPU VCore Voltage 1.425
FSB Termination Voltage 1.450
NB VCore 1.65

[sergmann]

@ CraptacularOne

The Batch is L726A601

[3NZ0]

1) Q6600 G0 @ 3.6ghz
2) L719B271
5) Tuniq tower with the fan on low medium (quiet)
6) 1.39v set in the bios (cpu-z doesn't seem to report it correctly)
7) P35 DQ6 Rev.1 F5

[CraptacularOne]

List up dated

@ sergmann, what cooling and mobo did you you use?

[sobol]

Hi Here is my second Q6600

1) Q6600 G0
2) L724A900 Pack Date: 08/28/2007
3) Screen shot below
4) Screen shot below
5) ThermalRight 120 Ultra Extreme + MOD + S-FLEX SFF21E
6) 1.450v bios, 1.432v windows
7) Asus P5K Deluxe, Bios 0404

[cfree1012]

q6600 g0 @3.76Ghz
L720B023
WC (swiftech apogee)
1.475v bios
Asus p5k premium.

http://img454.imageshack.us/my.php?i...llcoresbd0.jpg

[virtualrain]

virtualrain try running your prime with small FFT's. That is best for testing processor stability with Prime95.

I agree... What made you think I didn't know that?

I find small FFT's really stress the CPU and Blend obviously does both CPU and memory. Typically I OC the processor first with memory underclocked and get small FFT stability and then OC the memory and run Blend. I have found that your OC may pass small FFT but when you start overclocking the memory you will fail blend. I insist on all my OC's passing both for 8+hrs to be satisfied... My OC also passed 8+hrs of Small FFT as well...

[turtletrax]

1) Q6600 G0
2) L724A629
3) http://valid.x86-secret.com/show_oc.php?id=224953
4) http://img.photobucket.com/albums/v6...sPrime4Ghz.jpg
5) CPU Loop: DDC-2 Petra topped, Thermochill HE 120.3, D-Tek Fuzion, MCRes Micro
5.1) GPU/Chipset Loop: DDC-2 Petra topped, Thermochill PA 120.2, EK 8800GTX, 2xMCW-30, "T" line
6) 1.6 DMM
7) EVGA 680i "A1"

I did this run before I had done the Pencil "Droop" mod and will retry for much lower Vcore.

[CraptacularOne]

List up dated

Got a stable quad core? Post it here guys

[Coroner Kyle]

1) Q6600 G0
2) L724A629

What's the VID on this beast?

[turtletrax]

What's the VID on this beast?

VID is 1.275v

I am out of FSB on my 680i so I am waiting to get more info on X38 so I can decide on wether to get it or a p35 based board. I really want to see what this chip maxes out on a good board. The EVGA isnt a bad board but there is better