need tecs

[bocage]

i wanna go for tecs in my pc so what's the best wattage tecs for cooling a ati9800 and a p4c3.0ghz??? and were to buy them !! i really need some good ones to kick some guys ass who said his air oc'ed 2.8c is better than my 3.0c oc'ed even with tecs!!!!! lets see about that

[CCW]

*bump*

Welcome to the Xtreme!

majormav is using a 156watt TEC on his 9800, sorry but thats as much as I can help you with.

Craig

[sandman]

get a 226watt tec for the cpu, unless you find a bigger one, then get that.

You'll also need a couple nice psu to run all them.

[CCW]

An industrial grade PSU such as meanwell, something like this should easily do the job, i dont know how well normal PSUs run TECs but they have to be good uns

http://store.over-clock.co.uk/acatal...cessories.html

They are expensive though.

Craig

[bocage]

can i go with two 226w and a 172w peltiers in a mean well scp-600-24

[saaya]

a car heatercore can handle that heat easily, they are designed for some thousand watts of heat.

[Weapon]

dual '71 caprice heatcores with two shrouded 120s per heatercore could probably handle it....but those suckers are going to turn your comp room into a sauna unless you figure out some way to exhaust the heat out a window.

hmmmm....I just finished modding one of those heatercore -- be back later with a pic.

[\/icious]

hey dont the 2.8c oc better than 3.0c procs though

[Hot Carl]

You're going to need to get a damn nice heatercore, maybe two, to handle the load of two 226W pelts at max. It might not even be worth it. I don't think you'll get that much better temps...

[mdzcpa]

One properly volted 226w TEC is all you need for the CPU. Definitely get a good industrial PSU and don't even think about an ATX supply for the TEC.

One properly powered and cooled 226w TEC is all you'd need to hit 4Ghz and above with loaded temps just above 0c.

[bocage]

if i put 226W cpu and 172 gpu can i power it with a singel psu like s320-12 mean well or do i need anothe 1?? cus i think the 226W peltier won't have enough voltage with tha psu, it needs 15V & 24A, although with 12V it works but not as cooler as with 15V! the 172 needs 24.6V & 11.3A, it works with 18V! so i need two psu that can handle each 1 of them! the s320-12 can power the 226W but i need 1 psu that can handle the 15V that peltier need and 1other for the 172W! is the meanwell SP300-24 good enough to power the 172W and the s350-13.5 for the 226W??


sp300-24 -> output 24V, 0-12.5A
s350-13.5-> output 13.5V, 0-25.8A

tks on advance!!