Kayls CNC machined cpu/Gpu pots

[kayl]

CNc machined pots, first run for tests



CPu tubes copper base weights 866g and the aluminum tube is 470g

Mount plates not made yet though.




Gpu base is 1.168kg and aluminium tube 383g









One card fits easy






I did a mock up on my P5K board, it doesnt look like theres much room but for the SLI boards (Striker, eVGA, etc) there is much more clearance between PCI-E x16 slots around 85mm compared to 63mm on this P5k.



new gpu mount plates

[Unseen]

very nice kayl Waiting for your tests.

[1badhabit]

Now those are sexy

[Stapler]

Glad to see Australia's getting some quality pots, now I expect to see more LN2 results.

[tuchan]

Nice job Kayl

[tim-]

these pots are just stunning

[kayl]

thanxs guys.

Glad to see Australia's getting some quality pots, now I expect to see more LN2 results.

tucan and pro will be testing Ln2 once they get their dewer, ill be doing dice SLI tube run at an upcoming event along with my frozen cascade on the CPu

[Harshal]

Hey Kayl, amazing work on GPU pots... mate!!

[G H Z]

Looks great kayl, nice work!

[\Karting_freak]

kayl
how wide are those gpu pots? looks massive lol
imean from the base to the 'back'

[Solarfall]

hey kayl the containers look really nice...
have to ask. what kind of mounting bracket do you have for those cpu pots ??

[kayl]

kayl
how wide are those gpu pots? looks massive lol
imean from the base to the 'back'

brack to front is 50mm, left to right is 45mm, lots of copper

hey kayl the containers look really nice...
have to ask. what kind of mounting bracket do you have for those cpu pots ??

im gettgin duniek to make the cpu mount plates (same as his )

[T_M]

Think you messed up with that last photo kayl.
These pots fit easilt between SLI cards on an SLI board (unlike the one in your photo)

[kayl]

Think you messed up with that last photo kayl.
These pots fit easilt between SLI cards on an SLI board (unlike the one in your photo)

thanxs T_m, i fixed the post now

[Nosfer@tu]

Pure p0rn Kayl

[youngpro]

i recieved my kayl gpu pots today, very seckzi,

just the weight of copper in the base is awesome, there is a good 1-1.5cm of copper between the gpu plate and the internals of the pot, so it should handle high heatload of 8800 and the swing of ln2 well,

i think kayl made a good decision with the copper/alum hybrid, the alum shaft has nice thick walls but is also light so doesnt add unrequired weight to a part of the gpu tube that isn't required for temp control,

i took to the gpu plate with brasso and it came up a treat, a great mirror finish, ill be testing this pot with 1-2kg of dice on tuesday (any more than that and ill be up all night benching) to see how it improves the clocks of my 8800..

all in all these pots turned out great, very happy with the design and aesthetics, performance will be measured on tuesday night..

[dinos22]

great work kayl

now you've got an unbeatable arsenal of cooling methods to offer

great gear indeed

[kayl]

thanxs guys, pro cant wait to see the results

great work kayl

now you've got an unbeatable arsenal of cooling methods to offer

great gear indeed

thanxs dino and a great team of aussie overclockers over at i4memory to really hit hwbot hard in the next few weeks with all their new tube

[Stapler]

Hey Kayl, what's copper cost over their per kg?

[kayl]

Hey Kayl, what's copper cost over their per kg?

im not sure $ per kg, but the 50mm copper square stock was like $460Aus pr m and round copper stock 62mm was around $560. copper just keeps going up in price damit

[youngpro]

i recieved my kayl pots today, shined up the gpu plate a bit, here are some high quality photos for anyone interested,

[nhenhophach]

Very nice Kayl.

[kayl]

Very nice Kayl.

thanxs nhenhopach

I used one of my GPu phase change blocks and drilled a few holes in it and brazed it into a copper tube.







ill use plastic stand off when benching though







Next week end ill be benching CPu, Nb and sli gpu tubes cant wait

[Oliver]

thanxs nhenhopach

I used one of my GPu phase change blocks and drilled a few holes in it and brazed it into a copper tube.











Next week end ill be benching CPu, Nb and sli gpu tubes cant wait

Looking good and i understand why you cant wait .

[Freddie123]

How do you thread the base and pots? Is there a tool or is it milled on the cnc machine?