dude... unbelievable !!
I want that case when it's done
Got the rest of the Hardware
2nd BFG 8800 GTX OC
500Gb SATA2 HDD
Q6600 G0 CPU
Lite-ON SATA DVD-RW
Checked the fit of the SB waterblock
Since there wasn't much clearance for the GFX cards I thought it'd be better to rotate the block by 90deg
but to get the mounting holes to line up I then had to mount the top upside-down as well
Also did a slight mod to the DVD drive to provide me with a rear connector for the elect button and status LED
Inside the DVD drive
soldered leads onto the connector
connector glued into place on the circuit board
Wiring connected to the circuit board
circuit board back in it's place
And a view of the back of the drive
Put all the hardware together on a box (poor man's tech station) to get all the software installed
Sponsors:
Last edited by radodrill; 10-14-2007 at 06:19 PM.
Update time again
Installed the DVD drive
Re-sleeved the necessary PSU cabling in UV-blue
Also custom wired one cable for power to the floppy headers on the MB, the fans, lighting, and the pump.
Pulled the heatsinks off of the PWMIC, NB, and SB
Installed the mounting hardware for the waterblocks and re-installed the PWMIC block with AS5
Installed the waterblocks
Pulled the heatsinks off of the 8800GTXs
Applied the thermal pads and AS5 (if you're not confident that you won't over apply the thermal paste then you should use the ceramique that's included with the block)
Put on the waterblocks
Sponsors:
Last edited by radodrill; 10-14-2007 at 06:34 PM.
impressived... mucho money are there :d very nice rig :d
iMac 24''
BNDMOD @ Cruz Alta (Cba.) Argentina
Hey man, mad props. Its hard to do up an acrylic case so neat because you cant hide anything. It looks like your sponsors are going to get their money's worth
My Custom Pressure/Temperature Charts for Various Refrigerants
QX6700 @ 3900 | EVGA 680i |2 GB Corsair 8500 Dominator | 7800 GT SLi | Silverstone 1KW | Seagate 7200.9 Barracuda RAID 0 + Hitachi Deskstar 2TB RAID 0 | SS Phase w/ Cryostar Evap | MIPS Full Motherboard cooling
My Fake Quad Core is better than your real Quad Core! **cough**Barcelona**cough**
Lian Li Cube Case with Phase and Water DONE!!
I haven't checked back on this thread in a while but everything's coming along great. Can't wait 2 see the final product.
I love ur custom fan controller.
Kinda inspires me to attempt making a case of my own too.
CPU: Q6600 @ 3.6ghz G0 Week 37B
Mobo: Asus P5k Deluxe
Cooler: TRUE 120 (150cfm Delta)
2xHR-05
2xHR-09
Mem: G.Skill 4x1Gb 6400HZ
Vid: HIS 4850
HDD: 80Gb 16mb Cache Raptor
500Gb 7200.11 Seagate
PSU: Enermax Noisetaker 600w
Case: Thermaltake Armor (4x120mm 104CFM Panaflo)
3dmark06: 16k
Very nice job! Can't wait to see this all lit up
First off; slight mod to the PSU; since the stock fan was very loud I replaced it with a 140mm Yate Loon
There were some clearance issues with the GFX cards and the rear X-Flow Radiator
So the RAD is being replaced with a standard (non X-Flow) radiator
The two side by side
Clearance issue resolved
A few shots of the case
Installed the tubing for the CPU, NB, and SB
Adding the GFX cards
And the rest of the tubing
Filled the loop; currently bleeding/leak-testing (removed the drive bays to make it easier to see the tubing during this phase)
Booting it up for the first time after installing it into the case
A gallery of the case with different lighting schemes
Now it's just a matter of finishing up the baseboard for it.
I'll also post some stock-speed benchmarks shortly and also some overclocking results later on.
Sponsors:
Last edited by radodrill; 10-26-2007 at 04:24 PM.
Good job mate...it's very nice
Sorry for my bad English
GA-X38-DQ6 Vdroop moded
Ballistix Tracer PC8500 @ DDR1188 5-5-5-15 2.08v
Q6600 L737B 475x8 - 3800Mhz @ 1.39v
8800GTS G92 @ 830/1945/2200 36ºC idle, 39ºC full load (no mods for now..)
MCR320 | MCR120 | MCP355 + OCLabs XPtop | MCR-RES | FuZion + washer | MCW60
Looks Great! Good job
Here are some stock speed benchmarks on this system; not the 8800 GTXs have already been flashed the speeds of BFG's overclocked/watercooled card that's using the exact same card and waterblock I am.
24hr Prime95 stable (click for full-size)
3DMark 2001 SE
3DMark 2003
3DMark 2005
3DMark 2006
Aquamark 3
Last edited by radodrill; 10-29-2007 at 03:03 PM.
awesome
So good,so good
nice system
Nice job man, cool to see a full tower sized acrylic case, most are small (like mine).
Amazing job, I especially love the front panel.
XBOX Gamertag:Fujimitsu - I'm lonely, be my friend!
Wow, excellent job! It looks amazing?
So how do you get sponsored?
Very nice case u made
And a sweet system u got their
Keep up the nice work m8!
intel Core 2 Duo E6600 @ 8x400MHz
Asus P5E X38 bios 1201
Corsair TWIN2X2048-6400 x2 4GB in total
eVGA Geforece 9800GTX+ || Creative Audigy 2 ZS
Adaptec AAR1430SA 4port Raid card
Seagate Barracuda 7200.10 160GB 8MB SATA2 x2 (RAID0, OS drive) on Adaptec
Seagate Barracuda 7200.10 250GB 8MB SATA2 x2
Seagate Barracuda 7200.11 500GB 32MB SATA2
Seagate Barracuda 7200.11 1000GB 32MB SATA2
Seagate Barracuda 7200.11 1500GB 32MB SATA2 x4
Coolermaster CM 690 || Corsair CMPSU-520HX
Windows 7 Ultimate RTM x64
Philips 200WB7ES 20" WS 1680x1050
MacBook Pro 15" June 2009
iPhone 3GS 16GB
verry nice job
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
Bookmarks