The reason for the ban was not the post in this thread. The blame needs to be placed on the magic beans. Gotta watch out for them. Everything may not be as it appears.
The reason for the ban was not the post in this thread. The blame needs to be placed on the magic beans. Gotta watch out for them. Everything may not be as it appears.
Last edited by runmc; 07-08-2007 at 04:44 AM.
Last edited by runmc; 07-08-2007 at 04:45 AM.
Hey
sorry for not being online yesterday/tomorrow, but I really have hard internet acces.
Today I added aux condensers and vacuuming now, hope tomorrow see some nice results. photos in progress !
good stuff, looking forward to it.
It's highly likely that it was tossed into the tar pit or deleted.
Hey
I finished vacuuming two small auto-c, third in progress. I`ve got only one manifold station, so I`ve to wait untill vacuum on third unit will be complete.
Photos in high quality soon !!
Luke, maybe you typing wrong my accountnumber, or there is this time something nuclear attack in poland, but no money arrived. You got PM!
Six month i am waited to short out this deal. In my view i should be first of your "payment" list. Only it seems that, im maybe the last one.
Pleeease, short this out now.
Last edited by Pansuu; 07-11-2007 at 12:05 AM.
Töttörööö
Money is going to you, parts too, like I said. If you wanna I can post photos of "receipt" from bank, that money was send. I`m claryfing situation and I`m not lying. When I`m writing "money was send", so that`s true.
Polish banks are slow, postal sometimes is crazy, especially in my town. So be patient, money should be in this week in your account, max I think on monday. Parts can arrive a bit later.
pansuu:
expect up top 10workdays for bank transfers, some kind of standard in EU.
regards
Tim
OK, thanks, ill be waiting.
Töttörööö
I all ways assume a month when dealing with banks it is f**king ridicules and getting over the top! And the fee gouging too!!!!!!!! what a f**king rip!
Bring back natural selection! No more warning lables!
The one and Only MG Pony
xeon
yes it is, but this is EU, cost 5euro (~7,5$) for a transfer between two bank accounts in different countries which normally takes 7-10bank days maybe the lower numbers if swift is used, if accountnumber is used the higher numbers..
If I do same service from sweden to US I will have to pay something between 25-30$.
regards
Tim
I need to support luke that his word is good, when I bought something off him I actually paid him twice because off my own stupid fault but he returned everything promptly making it a good buisisness experience non the less. The unit was working up to specs, he forgot to add one thing I requested and paid for specificly but he ended up not using on the unit but that's not a big deal considering it wasn't a big piece and I haven't had any time even I had revieved it to do anything with it...
Trust Luke's word, he's been good for it in my case atleast
Photos in high quality soon !!
Did something happen?
Although I didn't buy a Phase unit off Luke, I did buy a Cedar Mill off him. There was no problem with the CPU that arrived. Was a good deal.
But this is like before, everything seems to finally be working out then we hear nothing, and somehow we are back to where we started.
I don't know about you, but if those 3 auto-cascades were done, then what could it be? Earthquake?? Maybe Pansuu is correct in his prediction.
He says above he's having a hard time getting internet access, its possible they're finished and in the post for all you know. I wouldn't get paranoid yet, give it another day or two.
Luke. You will get e-mail today.
I have used your cascade ~10h and it is really dying. With conroe @ 4.9GHz (1.83V) temperature goes up to -57c in load on both cores. It just can't hold load at all. I don't care if it does -90 idle..that means nothing when benching.
I'm very angry at the moment and I think I need some kind of refund.
You are as good as your samples are!
What is the unit tuned for?
Luke promised ~200W -100c. I think luke tuned this to get in -130c club and forgot to tune it with higher loads. No quad for this for sure
You are as good as your samples are!
You're using an E6700 right? At 4.9Ghz and 1.83v its putting out 257 watts did Luke tune for 200w?
What are you measuring temps from? That sounds like your measuring via software or the like. Units are almost always tuned by evaporator temperature, look at Sdumpers unit that I built him, he saw cores just below zero, while evap was holding much lower temps.Luke. You will get e-mail today.
I have used your cascade ~10h and it is really dying. With conroe @ 4.9GHz (1.83V) temperature goes up to -57c in load on both cores. It just can't hold load at all. I don't care if it does -90 idle..that means nothing when benching.
I'm very angry at the moment and I think I need some kind of refund.
Bookmarks