Just thought i post some pics of my Lian-li pc7 which i have modded just basic stuff as im a newbwould like some feed back/ideas to improve !
My system is:
a8n32-sli deluxe
AMD opteron 144 (running @ 3ghz)
2gb ocz platinum 2-3-2-5
WD 120 x 2 + WD 500
msi 6800gs X2 (sli)
Creative sound blaster x-fi extreme
Last edited by Pokerjo; 06-28-2007 at 10:07 PM.
wow, this is awesome chasis!
CPU: E6400 [SL9S9 (L637A907)]
Cooling: modded Scythe Infinity
GPX: Power Color X1800 XT 512MB 625/1550 > 750/1720 (VCore 1,575V, TT Sonic Tower + 100CFM fan)
PowerColor X1950 XT 512MB 627/1600 > 670/1710 (VCore 1,40V…working on Vmod, softmod is not possible on this card, not standard PCB) Cooling: modded TT Sonic Tower, AC Accelero 2X (2000RPM), Zalman VF-700
MB: Asus P5N-E SLI (i680) (VDrop-mod)> MAX FSB 522,5MHz
Cooling: Noctua NC-U6 + Noctua NF-R8 (1800RPM fan, VERY quiet)
RAM: 1,5GB Cheap Memory [2x512MB Crutical + 2x256MB Samsung] (533/4-4-4-12)>700/4-4-4-12-1T (2,15V) or 850/5-5-5-12-2T (2,25V)
HDD: Seagate.7 80GB + Samsung 120GB + Seagate.10 320GB
Chasis: moded TT Armor, Black with 250mm side-fan (w noise absorbing mats)
PCU: FSP 700W (the fan is very loud, going to change it)
Fans: (2x) AC Arctic Fan 12, (2x) Silverstone SST/FM122, (2x) Sharkoon Silent Eagle 2000, 92x38mm DELTA + plenty of fans from 40mm to 250mm
CPU-Z: CPU-4000MHz, room temp +5* (could do 4100 but my HDD crashed); RAM-860/5-5-5-12-2T; FSB-522,5MHz
Nice build Pokerjo
nice case. like the cable routing. time for me to get out the hole saw. i dont have as many holes to run wires through like the other case.
GIGABYTE G1.Sniper
I7 950---12GB F3-12800CL9T-12GBSR--GTX 460 hawk talon attack--300gb velociraptor
PC Power & Cooling Silencer 750 Quad
ASUS P8Z68-V PRO/GEN3
i7 2600k---GTX560 ti 2gb----16gb mushkin 997005---120gb mushkin chronos deluxe
PC power & cooling 750 quad
Nice clean build
great stuff
clean and neat
good job
Soon to be :
ASUS P8P67 Deluxe, Intel SB i7-2600k, G.Skill Rj-X F3-12800CL6D-4GBXH, MSI HD6950 2GB, Corsair 750AX, Intel 80GB G2 SSD, DELL U2410
Used to be: SaFrOuT
Awesome work Dude. What tools did you use??
Thanks i just used a drill and a hole saw, got some gromits from work (20mm + 25mm) and also purchased some gromits from maplin - http://www.maplin.co.uk/Module.aspx?...omits&doy=29m6 for the 24pin plug, due to the size of the 24pin i had to squeze it through the hole (29mm) without a gromit then cut the gromit and fit it with the lead already in place.
Last edited by Pokerjo; 06-29-2007 at 09:12 AM.
wow gj
Gaming Rig
Intel E6300
Intel Mobo
2 Gig OCZ 800 (800 5,5,5,15)
Saphire Ati 4870
22inch LG Flatron W2230S
PokerjoIs that al? 1.0mm?
my Armor is made by steel, 1.0mm...very difficult to work with!
CPU: E6400 [SL9S9 (L637A907)]
Cooling: modded Scythe Infinity
GPX: Power Color X1800 XT 512MB 625/1550 > 750/1720 (VCore 1,575V, TT Sonic Tower + 100CFM fan)
PowerColor X1950 XT 512MB 627/1600 > 670/1710 (VCore 1,40V…working on Vmod, softmod is not possible on this card, not standard PCB) Cooling: modded TT Sonic Tower
MB: Asus P5N-E SLI (i680) (VDrop-mod)> MAX FSB 522,5MHz
Cooling: Noctua NC-U6 + Noctua NF-R8 (1800RPM fan, VERY quiet)
RAM: 1,5GB Cheap Memory [2x512MB Crutical + 2x256MB Samsung] (533/4-4-4-12)>700/4-4-4-12-1T (2,15V) or 850/5-5-5-12-2T (2,25V)
HDD: Seagate.7 80GB + Samsung 120GB + Seagate.10 320GB
Chasis: moded TT Armor, Black with 250mm side-fan (w noise absorbing mats)
PCU: FSP 700W (the fan is very loud, going to change it)
Fans: (2x) AC Arctic Fan 12, (2x) Silverstone SST/FM122, (2x) Sharkoon Silent Eagle 2000, 92x38mm DELTA + plenty of fans from 40mm to 250mm
CPU-Z: CPU-4000MHz, room temp +5* (could do 4100 but my HDD crashed); RAM-860/5-5-5-12-2T; FSB-522,5MHz
My case is aluminium but i did do some test holes on a steel case but only on the outer shell which was 0.5mm thick maximum but it went through that easily just make sure you get good quality hole saw's and you should still be ok will just take a bit longer
Nice work. I would have put the holes a little closer to the board, but that is just me.
Core i7 920 D0 B-batch (4.1) (Kinda Stable?) | DFI X58 T3eH8 (Fed up with its' issues, may get a new board soon) | Patriot 1600 (9-9-9-24) (for now) | XFX HD 4890 (971/1065) (for now) |
80GB X25-m G2 | WD 640GB | PCP&C 750 | Dell 2408 LCD | NEC 1970GX LCD | Win7 Pro | CoolerMaster ATCS 840 {Modded to reverse-ATX, WC'ing internal}
CPU Loop: MCP655 > HK 3.0 LT > ST 320 (3x Scythe G's) > ST Res >Pump
GPU Loop: MCP655 > MCW-60 > PA160 (1x YL D12SH) > ST Res > BIP 220 (2x YL D12SH) >Pump
Hey dude your sig is HUGE. Please half it, at least.Originally Posted by TheBeast1590
PokerjoIs that al? 1.0mm?
my Armor is made by steel, 1.0mm...very difficult to work with!
Core i3-550 Clarkdale @ 4.2GHz, 1.36v (Corsair A50 HS/F) LinX Stable
MSI H55-GD65 Motherboard
G.Skill 4GBRL DDR3-1600 @ 1755, CL9, 1.55v
Sapphire Radeon 5750 1GB
Samsung F4 320GB - WD Green 1TB
Xigmatek Utgard Case - Corsair VX550
btw i used these hole saw's http://www.lawson-his.co.uk/scripts/...;20Hole%20Saws
Posting Permissions
Reply With Quote
Bookmarks