Dual Loop In a Antec Super Lanboy

[smokez1]

Has any one got any pictures of a Super LanBoy with 2 loops? Or any advice
for this setup.

I am working on installing 2 loops and need some advice.
One loop for 7900GS 3/8 tube,120mm Swiftech 120mm Rad and Swiftech Block.Pump for this block will be a DangerDen CSp-Mag. Rear mounted rad.

2nd loop with Hardware Labs 120mm Stealth X-flow Rad and 1/2 inch tube.
Swiftech Cpu Block, Apogee GT and Petra's modded DDCT for MCP355 18w.
Front Mounted Rad.

I already Have all these parts from other older builds.
I have Already modded the case for both rads.
Thanks

[Grinch]

welcome to xtremesystems...and good luck...

[p8ntslinger676]

i had a previous loop in a lanboy and it was very very cramped, i suggest getting a full atx tower otherwise you might now be able to fit everything.

[smokez1]

I already have most of the stuff fitted.

It will be full that is for sure.
Will post some pictures when i get it going.

[Ad1tya]

Aah.. Good luck with that.

I had a hard time fitting a Single loop in there...

[mcflurry4321]

Yeah good luck, It's hard enough to fit ONE loop in a regular sized case, let alone two. It can be done, as you will find out, but it won't be easy! I would like to see how you do it though! Again, good luck!