ordered mine today, will post this weekend with it on phase and my E6600 if it gets here in time. Seems like a really nice board.
Some read points i have found.
Last edited by doom_st; 06-14-2007 at 03:11 AM.
Asus P7P55D Pro I5 750 @ 4.0 Ghz(1.32v) 4x1Gb 1333cl9 @ 1600cl8 Intel X-25M SSD 80Gb 2xGTX260 SLI Enermax Galaxy 850w All on water.
I'm subscribing to this thread (new user) as I just returned my Infinity P965-S Dark because the freaking squealing it did was driving me nuts.
I'm a little confused here though; I read Evilsizer said it doesn't support 'fsb dividers'; what do you mean? Like, you can't drop the memory divider?
I think that what he means is that they've removed the manually selectable nortbridge strap option in the current BIOS.
abit IP35 Pro, E6600, HD3870, FSP FX700-GLN
abit AB9 QuadGT, E6400, 7900GTO, FSP FX600-GLN
abit AX78 x2
Asus P5N-E SLI, E6600, 8800GTS, Tagan 530W
this board is good...but...about on par with my QuadGT except for memory bandwidth....cpu: Q6600 on air
Super PI on IP35 was almost the same at 410 FSB as it was for the QuadGT board.
here is 495 FSB at 7X on the IP35...500 FSB (even at 6X) would freeze on me after 3 minutes of Prime 95:
BIOSTAR TPOWER I45 UNOFFICIAL THREAD
BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK
BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE
ABIT IP35 PRO HEATPIPE MOD
ABIT IP35 PRO BIOS FLASHING PROCEDURE
IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.
Intel Pentium G3258 | ASRock Z97M OC Formula | Samsung 2x4GB DDR3-1600 | Galaxy GTX660 GC | Samsung PM840 Pro 128GB, PM830 250GB FDE |
"I Love To Camp!"
"Comensing Shock Therapy!"
HeatWare
it's as fast as dfi p965 in Spi32m
Last edited by doom_st; 06-17-2007 at 01:11 PM.
Asus P7P55D Pro I5 750 @ 4.0 Ghz(1.32v) 4x1Gb 1333cl9 @ 1600cl8 Intel X-25M SSD 80Gb 2xGTX260 SLI Enermax Galaxy 850w All on water.
My DFI 680i ate my ram, I've been waiting around for these results to decide on a replacement. Only reason I am considering the P35 is because I run a Raid5 array, I'm not really keen on going back to another 680i solution...
HDtach scored my SATA-3 Raid5 at approx 350 burst and 90M read..
Does anyone have Raid-5 benchies for P35, abit or asus?
Abit IP35-Pro
C2D E6400 29B @ 3.6GHz
TR Ultra Xtreme HS 2x120mm
4x1GB Ballistix 6400 @ 1080MHz 1:1.2
3xSammy 500GB SATA-II Raid0/Raid5
Nvidia 8600GTS 750/1200 <=Soon to be hand-me-down for FamPC
I'm setting my board up now. The heatpipes have HORRIBLE contact on the core. Half of the core wasn't even touching the thermal pad. I fixed this by taking the heatpipes off and laying it on the board and by trial and error bent it until it layed flat on the board. This took forever... but now it is perfectly level.
i settled on 8X with 440 FSB...had to fall back from 450 FSB since one of my Dominator DDR2-1142 sticks bit the dust...presently using Teamgroup DDR2-1000...the highest FSB with my Q6600 was to 495 FSB at 7X using the Dominators...Teamgroup could only go to 490 FSB @ 7X...so...3520 Mhz @ 8X OR 3465 Mhz @ 7X ...sligtly better memory bandwidth at the higer FSB...appears to be an even trade off...i prefer raw power over memory bandwidth...years ago, i had the opposite opinion!
BIOSTAR TPOWER I45 UNOFFICIAL THREAD
BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK
BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE
ABIT IP35 PRO HEATPIPE MOD
ABIT IP35 PRO BIOS FLASHING PROCEDURE
IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.
[QUOTE=Ace-a-Rue;2257201]...i prefer raw power over memory bandwidth...QUOTE]
Me too that is why I wish Intel would use dividers or find a way to unlink the memory like nvidia. Fast timings and raw CPU horsepower is what I like.
ASUS P8P67 Pro Rev3; Intel 2600K; GSkill Ripjaws 1600 (2x4GB); XFX 5870; WD Black 500G x2 Raid0; Silverstone Striker 750W; SwiftechApogee-XT-TC PA120.3-Swiftech MP655; Lian Li G70B; Win7-64
------------------------------------------------------------------------------------------------------
The clueless don't even know they are.
Two things are infinite: the universe and human stupidity; and I'm not sure about the universe. -- Einstein
HEAT
Lian Li PC-A77B, Corsair 750TX PSU | Asus Max Formula->Rampage, 1001 BIOS | E8500 @4303MHz, Xigmatek S1283 | 4GB G.Skill DDR2 1066 | HIS 4890 Turbo | Super Talent FTM32GX25H SSD (boot), WD3000GLFS, ST31500341AS, WD6400AAKS | Pioneer 112D | X-Fi Titanium Fatal1ty Pro | Klipsch ProMedia Ultra 5.1 w/upgraded parts&cooling | LG W2600H 26" monitor | Windows 7 x64
how does this board compare to the p5k deluxe?
Rebuilding
First result with Abit IP35 PRO
The max FSB is 538MHz in aircooling and cascade... This CPU has a max FSB with P35-DS4 560MHz...
The max CPU-z with the X6800
CPU-z validator : http://valid.x86-secret.com/show_oc.php?id=208764
And to finish, my best SuperPI !
It's a very good motherboard and OC Guru works perfect in XP !
Last edited by mojo_lo; 06-17-2007 at 11:36 AM.
Bookmarks